NFS and ram filesystems
Dear friends,
We are finalizing our project on a custom 8260 board and as suggested in many "Linux HOWTO" we are trying to move from NFS to ram filesystem. Actually we have burned the flash with both kernel and ramdisk images and modified the initial bootargs variable to indicate where to find the two images.
At this point all is working, but the ramdisk image is obviously too small to support the whole application (Flash size cannot be larger than 2Mbytes).
The question is:
How can I boot the board by using PPCboot, mount initially the NFS filesystem, load a new big ramdisk image and finally remount root on ramdisk?
Any help would be appreciated.
many thanks
Gianfranco
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
Quoted 4 lines · Ing.Gianfranco Morandi
The question is:
How can I boot the board by using PPCboot, mount initially the NFS filesystem, load a new big ramdisk image and finally remount root on ramdisk?
??? say what ??
You just have to explain this a bit more what are you really trying to do? if you have nfsroot why switch over to a ramdisk.
If you want to test the system you have in a ramdisk there is much easier ways.
--
Kenneth Johansson
Ericsson AB Tel: +46 8 719 70 20
Tellusborgsvägen 94 Fax: +46 8 719 29 45
126 25 Stockholm [email protected]
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/