Berfore relocation.

Hai all .

I am very new to U-boot and trying to port u-boot onto MPC885 platform.

I have done necessary changes in uboot and burned the Uboot binary in NOR based FLASH.

The code is executing from FLASH and am able to see console messages.

And no messages are seen after the following

U-Boot 1.1.6 (Feb 2 2011 - 18:01:58)

CPU: MPC885ZPnn at 50 MHz: 8 kB I-Cache 8 kB D-Cache FEC present

Board: MPC885ADS

DRAM: (8 MB SDRAM) 8 MB

BEFORE RELOCATE

Can any one let me know, why this is happening and where might the problem be.

Thanks.

Ammu.

Dear Lakshmi T,

Can you please stop adding all these bogus empy lines? Thanks.

Re your problem: Please see the FAQ at
http://www.denx.de/wiki/view/DULG/UBootCrashAfterRelocation

Best regards,

Wolfgang Denk

DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"Plan to throw one away. You will anyway."
                              - Fred Brooks, "The Mythical Man Month"