libsocketcan: Setting CAN FD data bitrate
Hello Marc and Lars,
I have been searching for a possibility to set the CAN FD data bitrate with libsocketcan recently and came across this [1] old thread.
It seems like there has never been a final patch? If this is the case I will look into it myself but I wanted to make sure there is no other solution already present beforehand.
[1] - https://marc.info/?l=linux-can&m=153418949026459&w=2
Regards
Thomas Wagner
Marc Kleine-Budde
maintainerQuoted 8 lines · Thomas Wagner
Hello Marc and Lars,
I have been searching for a possibility to set the CAN FD data bitrate with libsocketcan recently and came across this [1] old thread.
It seems like there has never been a final patch? If this is the case I will look into it myself but I wanted to make sure there is no other solution already present beforehand.
As far as I know, there isn't any other solution.
Quoted 1 line
Feel free to pick up the discussion.
For the record: The thread starts at:
https://lore.kernel.org/r/[email protected]
regards
Marc
Signature · 4 lines
Pengutronix e.K. | Marc Kleine-Budde | Embedded Linux | https://www.pengutronix.de | Vertretung West/Dortmund | Phone: +49-231-2826-924 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |