Skip to contentSkip to conversation

Automatic download and flash programming with UART boot

U-Boot Andy Pont 1 participant 1 message Feb 18, 2015

lore
Share & tools
lore

Andy Pont

author
#0 lore raw

Hello,

The documentation [1] for the AM335x defines a manual process for UART booting as including the steps...

When 'CCCC' appear select XMODEM -> Send "u-boot-spl.bin", and then...

When 'CCCC' appear select YMODEM -> Send "u-boot.img"

Is there a pre-existing tool or script around that will automate this process which can then be used with a U-Boot debrick script to program the on-board flash devices?

Thanks,

Andy.

[1] http://processors.wiki.ti.com/index.php/AM335x_U-Boot_User%27s_Guide