WD doesn`t use disks with Linux - was Re: Re:Western Digital GreenPower drives and Linux
Quoted 3 lines
BTW, WD's tech support has gone silent so chances for an easier solution are not so great.
Tvrtko
Ive got a real funky response from WD support today, id like to share here. This is just too weird....
After asking if they could give a comment if the problem with the high Load_Cycle_Count may be an issue of their drives or an issue of Linux i got:
------
Dear......
The problem is, that we actually don`t use the disks with Linux. I´m sorry that i cannot send further information to you.
Sincery yours
<insert support employee name here>
Western Digital Service and Support
------
(translated from german)
So, WD sells enterprise SATA disks, optimizied for 24/7 & Raid array usage, but they don`t seem to actually test them with Linux or at least are not able to "support" Linux usage.......
Ridicuous!
Quoted 45 lines
List: linux-kernel Subject: Western Digital GreenPower drives and Linux From: "Tvrtko A. Ursulin" <tvrtko () ursulin ! net> Date: 2008-04-09 20:18:35 Message-ID: 200804092118.35501.tvrtko () ursulin ! net[Download message RAW]
Hi all,
The subject may be a bit misleading since I haven't investigated the whole issue under other OS-es (nor do I plan to), but this is how the story goes..
Those fancy new WD GreenPower drives seem to be heavily suffering from the rapidly increasing head load/unload problem. And the bad thing is they don't respond to 'hdparm -B', which would mean (I think) their power management behaviour is solely up to their firmware.
I got one of them (WD5000AACS) recently and to my horror after less than three days of being power on this is what I saw:
9
Power_On_Hours0x0032100 100 000Old_ageAlways - 66
193Load_Cycle_Count0x0032197 197 000Old_ageAlways - 10233At this rate the disk would reach it's design limit for load/unload cycles in around 80 days. Not good - so I implemented a lame workaround of keeping disk busy every couple of seconds - hopefully that won't kill it sooner that unloads would..
I am also currently talking with first line of WD's tech support trying to get some data on how exactly those drives manage head unloading, but that may not lead anywhere useful.
So in parallel I decided to ask here to see if someone knows something about this?
If it matters, I am running vanilla 2.6.24 on that box and
sata_silis driving that disk. Otherwise it is a pretty basic Ubuntu 7.10, a mix of ext3 and jfs filesystems, all mounted with noatime. More detailed information available on request.Tvrtko
Quoted 18 lines · Roland
Quoted 4 lines
BTW, WD's tech support has gone silent so chances for an easier solution are not so great.
Tvrtko
I
ve got a real funky response from WD support today, id like to share here.
This is just too weird....After asking if they could give a comment if the problem with the high
Load_Cycle_Countmay be an issue of their drives or an issue of Linux i got:------
Dear......
The problem is, that we actually don`t use the disks with Linux. I´m sorry that i cannot send further information to you.
Quoted 5 lines
Sincery yours
<insert support employee name here>
Western Digital Service and Support
------
(translated from german)
Well the answer was probably just from a first level support person so nothing one should get excited about.
Anyway to the high Load_Cycle_Count; if I understood the technology correctly the WD GreenPower drives are exactly "Green" because they unload the heads on a plastic ramp (no landing zone!) quite often during longer idle periods. Thus they can power off the positioning logic and actuator of the heads. -> safe Power
This also explains why the power usage under seek is comparable with other "non-green" drives...
<snipped a lot of stuff>
Quoted 1 line
193
Load_Cycle_Count0x0032197 197 000Old_ageAlways - 10233
my 1 TB drive has also a relative high value:
193 Load_Cycle_Count 0x0032 200 200 000 Old_age
Always - 2786
Just my 2 cents,
Arnd
||
Quoted 5 lines · Arnd Hannemann
Well the answer was probably just from a first level support person so nothing one should get excited about.
Anyway to the highLoad_Cycle_Count; if I understood the technology correctly the WD GreenPower drives are exactly "Green" because they
I don't find it Green when I have to buy new disks because of their detrimental parking technique.
Quoted 1 line
unload the heads on a plastic ramp (no landing zone!) quite often during
ramp or LZ, it's quite a force with which the head is parked.
Quoted 6 lines · Jan Engelhardt
Quoted 4 lines · Arnd Hannemann
Well the answer was probably just from a first level support person so nothing one should get excited about.
Anyway to the highLoad_Cycle_Count; if I understood the technology correctly the WD GreenPower drives are exactly "Green" because they
Quoted 7 lines
I don't find it Green when I have to buy new disks because of their detrimental parking technique.
Quoted 1 line
unload the heads on a plastic ramp (no landing zone!) quite often during
ramp or LZ, it's quite a force with which the head is parked.
Well I'm no expert, but I would say comparing to the normal wear out due to use (seeking, bearing wear out, vibrations, spin up, bumps) the factor of a controlled unload/load cycle on a plastic ramp is probably negligible.
BTW: my hitachi notebook drive, which I believe has a similar load/unload technology has:
Quoted 1 line
193
Load_Cycle_Count0x0032057 057 000Old_ageAlways - 258528/258360
And it didn't fail on me yet...
Of course this is just one data point.
Regards,
Arnd Hannemann
Quoted 39 lines · Arnd Hannemann
Quoted 18 lines · Roland
Quoted 4 lines
BTW, WD's tech support has gone silent so chances for an easier solution are not so great.
Tvrtko
I
ve got a real funky response from WD support today, id like to share here.
This is just too weird....After asking if they could give a comment if the problem with the high
Load_Cycle_Countmay be an issue of their drives or an issue of Linux i got:------
Dear......
The problem is, that we actually don`t use the disks with Linux. I´m sorry that i cannot send further information to you.Quoted 5 lines
Sincery yours
<insert support employee name here>
Western Digital Service and Support
------
(translated from german)Well the answer was probably just from a first level support person so nothing one should get excited about.
Anyway to the highLoad_Cycle_Count; if I understood the technology correctly the WD GreenPower drives are exactly "Green" because they unload the heads on a plastic ramp (no landing zone!) quite often during longer idle periods. Thus they can power off the positioning logic and actuator of the heads. -> safe Power
This also explains why the power usage under seek is comparable with other "non-green" drives...<snipped a lot of stuff>
Quoted 1 line
193
Load_Cycle_Count0x0032197 197 000Old_ageAlways - 10233my 1 TB drive has also a relative high value:
Quoted 7 lines
193
Load_Cycle_Count0x0032200 200 000Old_age
Always - 2786Just my 2 cents,
Arnd
||
Practically nobody has any on-line support that means anything anymore. The person who wrote the response is probably in the Philippines, makes about $US 3.00 per hour, and is allowed to pee twice a day. Don't worry. The tiny "bump-proof" drives cycle on an off many times to conserve power. They also keep the heads from landing "crashing" by inserting a plastic wedge between the swing-arms during power down. It's probably a lot less harmful than letting the heads touch down somewhere.
It's not just the positioning logic that gets powered off. The discs are spun down, which saves a lot of power.
Cheers,
Dick Johnson
Penguin : Linux version 2.6.22.1 on an i686 machine (5588.29 BogoMips). My book : http://www.AbominableFirebug.com/
_
****************************************************************
The information transmitted in this message is confidential and may be privileged. Any review, retransmission, dissemination, or other use of this information by persons or entities other than the intended recipient is prohibited. If you are not the intended recipient, please notify Analogic Corporation immediately - by replying to this message or by sending an email to [email protected] - and destroy all copies of this information, including any attachments, without reading or disclosing them.
Thank you.
Quoted 3 lines · linux-os (Dick Johnson)
It's not just the positioning logic that gets powered off. The discs are spun down, which saves a lot of power.
And drives latencies into the skies.
Not to mention that the permanent spinups and downs also affect life.
Quoted 9 lines · Jan Engelhardt
Quoted 3 lines · linux-os (Dick Johnson)
It's not just the positioning logic that gets powered off. The discs are spun down, which saves a lot of power.
And drives latencies into the skies.
Not to mention that the permanent spinups and downs also affect life.
Yes. Maybe there is a way to turn if off? That's why we should be able to get somebody from WD who will answer a Linux question, instead of the usual on-line "help."
I'm going to poke around and see if I can find a real person at WD.
Cheers,
Dick Johnson
Penguin : Linux version 2.6.22.1 on an i686 machine (5588.29 BogoMips). My book : http://www.AbominableFirebug.com/
_
****************************************************************
The information transmitted in this message is confidential and may be privileged. Any review, retransmission, dissemination, or other use of this information by persons or entities other than the intended recipient is prohibited. If you are not the intended recipient, please notify Analogic Corporation immediately - by replying to this message or by sending an email to [email protected] - and destroy all copies of this information, including any attachments, without reading or disclosing them.
Thank you.
Quoted 12 lines · Richard B. Johnson
Quoted 9 lines · Jan Engelhardt
Quoted 3 lines · linux-os (Dick Johnson)
It's not just the positioning logic that gets powered off. The discs are spun down, which saves a lot of power.
And drives latencies into the skies.
Not to mention that the permanent spinups and downs also affect life.
Quoted 7 lines
Yes. Maybe there is a way to turn if off? That's why we should be able to get somebody from WD who will answer a Linux question, instead of the usual on-line "help."
I'm going to poke around and see if I can find a real person at WD.
It took about 3/4 hour to access their web-page and get a question submitted. It has been my experience that companies that don't maintain their web-pages, don't really care about customers. My query was, "How do I turn off Green Power so I don't have the horrible latencies on virtual memory systems that have active swapping?"
In the unlikely event that they answer me, I will put the answer on this list. My guess is that if they do answer me, the answer will be, "Duhh?" We'll see.
Cheers,
Dick Johnson
Penguin : Linux version 2.6.22.1 on an i686 machine (5588.29 BogoMips). My book : http://www.AbominableFirebug.com/
_
****************************************************************
The information transmitted in this message is confidential and may be privileged. Any review, retransmission, dissemination, or other use of this information by persons or entities other than the intended recipient is prohibited. If you are not the intended recipient, please notify Analogic Corporation immediately - by replying to this message or by sending an email to [email protected] - and destroy all copies of this information, including any attachments, without reading or disclosing them.
Thank you.
Quoted 29 lines · linux-os (Dick Johnson)
Quoted 12 lines · Richard B. Johnson
Quoted 9 lines · Jan Engelhardt
Quoted 3 lines · linux-os (Dick Johnson)
It's not just the positioning logic that gets powered off. The discs are spun down, which saves a lot of power.
And drives latencies into the skies.
Not to mention that the permanent spinups and downs also affect life.Quoted 7 lines
Yes. Maybe there is a way to turn if off? That's why we should be able to get somebody from WD who will answer a Linux question, instead of the usual on-line "help."
I'm going to poke around and see if I can find a real person at WD.
It took about 3/4 hour to access their web-page and get a question submitted. It has been my experience that companies that don't maintain their web-pages, don't really care about customers. My query was, "How do I turn off Green Power so I don't have the horrible latencies on virtual memory systems that have active swapping?"
Quoted 4 lines
In the unlikely event that they answer me, I will put the answer on this list. My guess is that if they do answer me, the answer will be, "Duhh?" We'll see.
The only answer I got was the "canned" answer about contacting your hardware and software vendor. There don't seem to be any humans employed there, anymore. That's unfortunate because Lake Forest, California is a nice place.
Cheers,
Dick Johnson
Penguin : Linux version 2.6.22.1 on an i686 machine (5588.29 BogoMips). My book : http://www.AbominableFirebug.com/
_
****************************************************************
The information transmitted in this message is confidential and may be privileged. Any review, retransmission, dissemination, or other use of this information by persons or entities other than the intended recipient is prohibited. If you are not the intended recipient, please notify Analogic Corporation immediately - by replying to this message or by sending an email to [email protected] - and destroy all copies of this information, including any attachments, without reading or disclosing them.
Thank you.
Quoted 27 lines · Roland
Quoted 4 lines
BTW, WD's tech support has gone silent so chances for an easier solution are not so great.
Tvrtko
I
ve got a real funky response from WD support today, id like to share here.
This is just too weird....After asking if they could give a comment if the problem with the high
Load_Cycle_Countmay be an issue of their drives or an issue of Linux i got:------
Dear......
The problem is, that we actually don`t use the disks with Linux. I´m sorry that i cannot send further information to you.Sincery yours
<insert support employee name here>
Western Digital Service and Support
------
(translated from german)
Quoted 6 lines
So, WD sells enterprise SATA disks, optimizied for 24/7 & Raid array usage, but they don`t seem to actually test them with Linux or at least are not able to "support" Linux usage.......
Ridicuous!
[snip rest]
WD has certainly lost me and my company as customers with this attitude.
//Niels
I wrote a few notes about load cycles here:
http://www.pixelbeat.org/docs/hard_disk_reliability/
It's bad that the WD GreenPower doesn't supporthdparm -B setting its parameters, but I found I
didn't need to tweak these anyway.
I just got the distro to write less often to the drive with the (rel)atime mount options. With that I got an acceptable load cycle rate.
Pádraig.
Quoted 10 lines · Pádraig Brady
I wrote a few notes about load cycles here:
http://www.pixelbeat.org/docs/hard_disk_reliability/It's bad that the WD GreenPower doesn't support
hdparm -Bsetting its parameters, but I found I
didn't need to tweak these anyway.I just got the distro to write less often to the drive with the (rel)atime mount options. With that I got an acceptable load cycle rate.
The problem is not how often Linux wakes the head up due to writes of any sort, but how often the head decides to go down without our consent.