Skip to contentSkip to conversation

meta-swupdate layer with precompiled uboot

DISCUSSION Andreas Enbacka 2 participants 4 messages Feb 9, 2017

lore
Share & tools
lore
#0 lore raw

Hello,

I am looking into using your custom meta-swupate with our current Yocto 1.8.1 (fido) based image. However, as we are using Kontron SMARC sAMX6i for our platform, Kontron supplies a pre-compiled uBoot. Is it possible to use meta-swupdate

to some extent without uBoot support, or is it possible to get it to work without compiling uBoot as well? Any information would be greatly appreciated.

Best regards,

Andreas Enbacka

Gasera Ltd

#1 lore raw

Hi Andreas,

Quoted 6 lines · Andreas Enbacka

Hello,

I am looking into using your custom meta-swupate with our current Yocto 1.8.1 (fido) based image.

Please take a look - I know from ML that there is people still using fido and they pushed patches to this branch, but I merge new things just into -master, -morty and -krogoth.

Quoted 5 lines

However, as we are using Kontron SMARC sAMX6i
for our platform, Kontron supplies a pre-compiled uBoot. Is it possible to use meta-swupdate

to some extent without uBoot support,

Yes - if you do not touch the environment, you can disable U-Boot support running "bitbake -c menuconfig swupdate"

Quoted 2 lines

or is it possible to get it to
work without compiling uBoot as well?

It should work, if you disable U-Boot the libubootenv library should not be linked.

Quoted 4 lines

Any information would be greatly
appreciated.

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected]
=====================================================================
#2 lore raw

Hello,

Thanks for the info. I tried to download the fido branch of the meta-swupdate layer, and executed bitbake -c menuconfig swupdate. I got the following error output (using Kontron SMARC sAMX6i machine config):

ERROR: Nothing PROVIDES 'u-boot-fw-utils' (but /home/andreas/yocto1.8/fsl-community-bsp/sources/meta-swupdate/recipes-suppo rt/swupdate/swupdate_git.bb DEPENDS on or otherwise requires it)
ERROR: u-boot-fw-utils was skipped: Either UBOOT_MACHINE or UBOOT_CONFIG must be set in the smarc-samx6i machine configuration.

ERROR: Required build target 'swupdate' has no buildable providers. Missing or unbuildable dependency chain was: ['swupdate', 'u-boot-fw-utils']

Seems to be some issue with building u-boot-fw-utils?

//Andreas

-----Original Message-----
From: Stefano Babic [mailto:[email protected]]
Sent: 9. helmikuutata 2017 11:59
To: Andreas Enbacka <[email protected]>; [email protected]
Subject: Re: [yocto] meta-swupdate layer with precompiled uboot

Hi Andreas,

Quoted 7 lines · Andreas Enbacka

Hello,

I am looking into using your custom meta-swupate with our current Yocto
1.8.1 (fido) based image.

Please take a look - I know from ML that there is people still using fido and they pushed patches to this branch, but I merge new things just into -master, -morty and -krogoth.

Quoted 5 lines

However, as we are using Kontron SMARC sAMX6i for our platform, Kontron supplies a pre-compiled uBoot. Is it possible to use meta-swupdate

to some extent without uBoot support,

Yes - if you do not touch the environment, you can disable U-Boot support running "bitbake -c menuconfig swupdate"

Quoted 2 lines

or is it possible to get it to
work without compiling uBoot as well?

It should work, if you disable U-Boot the libubootenv library should not be linked.

Quoted 4 lines

Any information would be greatly
appreciated.

Best regards,
Stefano Babic

--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected]
=====================================================================

#3 lore raw

Hi Andreas,

Quoted 12 lines · Andreas Enbacka

Hello,

Thanks for the info. I tried to download the fido branch of the meta-swupdate layer, and executed bitbake -c menuconfig swupdate. I got the following error output (using Kontron SMARC sAMX6i machine config):

ERROR: Nothing PROVIDES 'u-boot-fw-utils' (but /home/andreas/yocto1.8/fsl-community-bsp/sources/meta-swupdate/recipes-suppo rt/swupdate/swupdate_git.bb DEPENDS on or otherwise requires it)
ERROR: u-boot-fw-utils was skipped: Either UBOOT_MACHINE or UBOOT_CONFIG must be set in the smarc-samx6i machine configuration.

Quoted 5 lines

ERROR: Required build target 'swupdate' has no buildable providers. Missing or unbuildable dependency chain was: ['swupdate', 'u-boot-fw-utils']

Seems to be some issue with building u-boot-fw-utils?

Old branches like fido have fixes dependencies in DEPENDS. I have implemented in b794e0ef8adccaa70b05463d52d3fd49f0917bb6 a way to add DEPENDS checking defconfig, and dropping what is not required.

You can drop u-boot-fw-utils from DEPENDS in your custom meta-swupdate or try applying (I have not tested on fido) the mentioned commit, and if it works, we can merge it also in this old "fido".

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected]
=====================================================================