Skip to contentSkip to conversation

USB Zip 250 hangs 2.4.3, panics 2.4.3-ac2,-ac9

PANIC James Turinsky (LKML) 1 participant 1 message Apr 21, 2001

lore
Share & tools
lore

James Turinsky (LKML)

author
#0 lore raw

----- Original Message -----
From: "James Turinsky (LKML)" <[email protected]>
To: <[email protected]>; <[email protected]>
Sent: Friday, April 20, 2001 4:34 PM
Subject: USB Zip 250 hangs 2.4.3, panics 2.4.3-ac2,-ac9

Quoted 7 lines

[not subbed to [email protected], please mail me directly]

Hi all,

I'm having MAJOR problems with using a USB Zip 250 with Linux 2.4.3.

Quoted 7 lines

First thing I saw, is under 2.4.3-ac9, I have hotplug support and /sbin/hotplug installed, and I plugged it in and it found the drive (yay!). Then I mounted the disk in the drive ( -t vfat -o sync IIRC) and tried to copy a chunk of an ISO image sized just under the max of the zip disk. BLAMMO! Oops, process: swapper, Kernel panic: Aiee, killing interrupt handler! In interrupt handler - not syncing (I have the output -- but in pen and ink form and I'm not fit to type

it

Quoted 2 lines

and run it through ksymoops yet.) This was repeatable at least three times.

Here is that ksymoops output, if it's weird, it's because the oops I fed it was typed manually

ksymoops 2.4.1 on i586 2.4.3-ac9. Options used
-V (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.4.3-ac9/ (default)
-m /boot/System.map-2.4.3-ac9 (specified)

c01c5f1c

Oops: 0000
CPU: 0

EIP: 0010:[<c01c5f1c>]
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010006
eax: c0253f34 ebx: c1237de8 ecx: 00000002 edx: 00000000
esi: c64807e0 edi: c1237d60 ebp: c1237de8 esp: c0253f1c
ds: 0018 es: 0018 ss: 0018
Process swapper (pid: 0, stackpage=c0253000)
stack: c12a0340 c01c5ebc 00000000 c0253fa4 00000282 c12a0340 c0253f34 c0253f34
c011a8a2 c12a0340 00000000 c028c5a0 00000000 c0253fa4 c010b8af c0253f8c c023a3b4 c011787f 00000000 c01177b7 00000000 00000001 c028c5c0 0000000e call trace: [<c01c5ebc>] [<c011a8a2>] [<c010b8af>] [<c011787f>] [<c01177b7>]
[<c01176c0>] [<c0107e72>]
[<c0105120>] [<c0106b10>] [<c0105120>] [<c0105143>] [<c01051a7>] [<c0105000>] [<c0100191>]

Code: f6 42 24 01 74 1e a1 48 54 2a c0 83 c0 fb 2b 42 2c 78 11 56
Quoted 1 line
Quoted 1 line

EIP; c01c5f1c <rh_int_timer_do+60/118> <=====

Trace; c01c5ebc <rh_int_timer_do+0/118>
Trace; c011a8a2 <timer_bh+212/24c>
Trace; c010b8af <timer_interrupt+db/154>
Trace; c011787f <bh_action+1b/60>
Trace; c01177b7 <tasklet_hi_action+3b/60>
Trace; c01176c0 <do_softirq+40/64>
Trace; c0107e72 <do_IRQ+a2/b0>
Trace; c0105120 <default_idle+0/28>
Trace; c0106b10 <ret_from_intr+0/20>
Trace; c0105120 <default_idle+0/28>
Trace; c0105143 <default_idle+23/28>
Trace; c01051a7 <cpu_idle+3f/54>
Trace; c0105000 <init+0/110>
Trace; c0100191 <L6+0/2>
Code; c01c5f1c <rh_int_timer_do+60/118>
00000000 <_EIP>:
Code; c01c5f1c <rh_int_timer_do+60/118> <=====
0: f6 42 24 01 testb $0x1,0x24(%edx) <=====
Code; c01c5f20 <rh_int_timer_do+64/118>
4: 74 1e je 24 <_EIP+0x24> c01c5f40
<rh_int_timer_do+84/118>
Code; c01c5f22 <rh_int_timer_do+66/118>
6: a1 48 54 2a c0 mov 0xc02a5448,%eax
Code; c01c5f27 <rh_int_timer_do+6b/118>
b: 83 c0 fb add $0xfffffffb,%eax
Code; c01c5f2a <rh_int_timer_do+6e/118>
e: 2b 42 2c sub 0x2c(%edx),%eax
Code; c01c5f2d <rh_int_timer_do+71/118>
11: 78 11 js 24 <_EIP+0x24> c01c5f40
<rh_int_timer_do+84/118>
Code; c01c5f2f <rh_int_timer_do+73/118>
13: 56 push %esi

<0>Kernel panic: Aiee, killing interrupt handler!

Quoted 4 lines

Then I booted 2.4.3-ac2 and repeated the behaviour.

[note: -ac2 changelog contains "o Fix shm locking, races on swapping, accounting and swapout of already mapped pages (Stephen Tweedie)",

maybe

Quoted 1 line

that touched something which changed the behaviour between 2.4.3

and -ac

Quoted 5 lines

series?]

I booted 2.4.3 stock and tried the same thing. Running ls -la on the zip mountpoint showed that it did indeed copy part of the file but stopped. cp was in D state and I could not shutdown/halt the system

nor

Quoted 2 lines

umount/eject the disk (and dammit, yanking the power/USB cable just dawned on me). This behaviour was repeatable and the point at which

the

Quoted 3 lines

file ended varied.

I did manage to get a 13MB file copied to a Zip disk by mounting

without

Quoted 1 line

the '-o sync' and then issuing sync manually after the copy (which

then

Quoted 7 lines

wrote it to disk).

I will type in the Oops output and run it through ksymoops as soon as possible.

I won't get access to the machine until Monday but if anyone has suggestions on things to try or instructions on how to help debug

this,

Quoted 3 lines

please let me know

Below is the of course standard info/debugging aid. If you want

anything

Quoted 6 lines

else please tell me.

--JT
Sair LCA, LPIC-1 [I am a certification whore]

Linux version 2.4.3-ac9 (foo) (gcc version 2.95.3 19991030

(prerelease))

Quoted 74 lines

#1 Wed Apr 18 10:53:33 GMT 2001
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f820a - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000008000000 (usable)
BIOS-e820: 00000000ffff820a - 0000000100000000 (reserved)
On node 0 totalpages: 32768
zone(0): 4096 pages.
zone(1): 28672 pages.
zone(2): 0 pages.
No local APIC present or hardware disabled
Kernel command line: BOOT_IMAGE=linux ro ide=reverse
ide_setup: ide=reverse : Enabled support for IDE inverse scan order. Initializing CPU#0
Detected 398.625 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 796.26 BogoMIPS
Memory: 126664k/131072k available (1029k kernel code, 4016k reserved, 321k data, 216k init, 0k highmem)
Dentry-cache hash table entries: 16384 (order: 5, 131072 bytes) Buffer-cache hash table entries: 8192 (order: 3, 32768 bytes) Page-cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 8192 (order: 4, 65536 bytes)
VFS: Diskquotas version dquot_6.5.0 initialized
CPU: Before vendor init, caps: 008021bf 808029bf 00000000, vendor = 2 Enabling new style K6 write allocation for 128 Mb

CPU: L1 I Cache: 32K (32 bytes/line), D cache 32K (32 bytes/line)
CPU: After vendor init, caps: 008021bf 808029bf 00000000 00000002
CPU:     After generic, caps: 008021bf 808029bf 00000000 00000002
CPU:             Common caps: 008021bf 808029bf 00000000 00000002
CPU: AMD-K6(tm) 3D processor stepping 0c

Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch ([email protected])
mtrr: detected mtrr type: AMD K6
PCI: PCI BIOS revision 2.10 entry at 0xfda2e, last bus=0
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router PIIX [8086/7000] at 00:07.0
Limiting direct PCI/PCI transfers.
Activating ISA DMA hang workarounds.
isapnp: Scanning for PnP cards...
isapnp: Card 'OPL3-SA2 Sound Board'
isapnp: 1 Plug & Play card detected total
PnP: PNP BIOS installation structure at 0xc00f7da0
PnP: PNP BIOS version 1.0, entry at f0000:c6cd, dseg at f0000 Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039 Starting kswapd v1.8
Winbond Super-IO detection, now testing ports 3F0,370,250,4E,2E ... SMSC Super-IO detection, now testing Ports 2F0, 370 ...
PnPBIOS: Parport found PNPBIOS PNP0401 at io=0378,0778 irq=7 dma=3 0x378: FIFO is 16 bytes
0x378: writeIntrThreshold is 8
0x378: readIntrThreshold is 8
0x378: PWord is 8 bits
0x378: Interrupts are ISA-Pulses
0x378: ECP port cfgA=0x10 cfgB=0x4b
0x378: ECP settings irq=7 dma=3
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
*NEW* atyfb: mach64VTA4 (ATI264VT) [0x5654 rev 0x40] 2M EDO, 14.31818 MHz XTAL, 200 MHz PLL, 63 Mhz MCLK
Console: switching to colour frame buffer device 80x25
fb0: ATY Mach64 frame buffer device on PCI
vesafb: abort, cannot reserve video memory at 0xfd000000 Detected PS/2 Mouse Port.
pty: 256 Unix98 ptys configured
block: queued sectors max/low 84042kB/28014kB, 256 slots per queue

Quoted 8 lines

Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PDC20262: IDE controller on PCI bus 00 dev 88
PCI: Found IRQ 11 for device 00:11.0
PDC20262: chipset revision 1
PDC20262: not 100% native mode: will probe irqs later
PDC20262: (U)DMA Burst Bit ENABLED Primary PCI Mode Secondary PCI

Mode.

Quoted 37 lines
    ide0: BM-DMA at 0xfcc0-0xfcc7, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xfcc8-0xfccf, BIOS settings: hdc:DMA, hdd:pio
PIIX3: IDE controller on PCI bus 00 dev 39
PIIX3: chipset revision 0
PIIX3: not 100% native mode: will probe irqs later
    ide2: BM-DMA at 0xfc90-0xfc97, BIOS settings: hde:pio, hdf:pio
    ide3: BM-DMA at 0xfc98-0xfc9f, BIOS settings: hdg:pio, hdh:pio

hda: IBM-DTTA-371010, ATA DISK drive
hdc: NEC CD-ROM DRIVE:282, ATAPI CD/DVD-ROM drive
ide0 at 0xf4f0-0xf4f7,0xfc8a on irq 11
ide1 at 0xf4f8-0xf4ff,0xfc8e on irq 11
hda: 19746720 sectors (10110 MB) w/465KiB Cache, CHS=19590/16/63, UDMA(33)
hdc: ATAPI 8X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.12
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
devfs: v0.102 (20000622) Richard Gooch ([email protected])
devfs: boot_options: 0x0
Serial driver version 5.05a (2001-03-20) with MANY_PORTS SHARE_IRQ DETECT_IRQ SERIAL_PCI ISAPNP enabled
ttyS01 at 0x02f8 (irq = 3) is a 16550A
ttyS02 at 0x03e8 (irq = 4) is a 16550A
Real Time Clock Driver v1.10d
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
PCI: Enabling device 00:07.2 (0004 -> 0005)
PCI: Found IRQ 9 for device 00:07.2
uhci.c: USB UHCI at I/O 0xfca0, IRQ 9
usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found
hub.c: 2 ports detected
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP

Quoted 8 lines

IP: routing cache hash table of 1024 buckets, 8Kbytes
TCP: Hash tables configured (established 8192 bind 8192)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (ext2 filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 216k freed
hub.c: USB new device connect on bus1/1, assigned device number 2 usb.c: USB device 2 (vend/prod 0x59b/0x30) is not claimed by any

active

Quoted 16 lines

driver.
SCSI subsystem driver Revision: 1.00
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
scsi0 : SCSI emulation for USB Mass Storage devices
Vendor: IOMEGA Model: ZIP 250 Rev: 32.G
Type: Direct-Access ANSI SCSI revision: 02
WARNING: USB Mass Storage data integrity not assured USB Mass Storage device found at 2
USB Mass Storage support registered.
Adding Swap: 262576k swap-space (priority -1)
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0 SCSI device sda: 489532 512-byte hdwr sectors (251 MB)
sda: Write Protect is off
/dev/scsi/host0/bus0/target0/lun0: p4
PCI: Enabling device 00:13.0 (0014 -> 0017)

Quoted 8 lines

PCI: Found IRQ 10 for device 00:13.0
3c59x.c:LK1.1.13 27 Jan 2001 Donald Becker and others.
http://www.scyld.com/network/vortex.html
See Documentation/networking/vortex.txt
eth0: 3Com PCI 3c905B Cyclone 100baseTx at 0xfc00, 00:10:4b:32:1b:4e, IRQ 10
product code 4e42 rev 00.0 date 01-30-98
8K byte-wide RAM 5:3 Rx:Tx split, autoselect/Autonegotiate

interface.

Quoted 48 lines

MII transceiver found at address 24, status 782d. Enabling bus-master transmits and whole-frame receives.
eth0: scatter/gather enabled. h/w checksums enabled
eth0: using NWAY device table, not 8
lp0: using parport0 (interrupt-driven).
lp0: console ready

Module Size Used by

lp                      5408   1  (autoclean)
3c59x                  23232   1  (autoclean)
sd_mod                  9920   1  (autoclean)
usb-storage            21296   1
scsi_mod               77648   2  [sd_mod usb-storage]

00:07.2 USB Controller: Intel Corporation 82371SB PIIX3 USB [Natoma/Triton II] (rev 01) (prog-if 00 [UHCI])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin D routed to IRQ 9
Region 4: I/O ports at fca0 [size=32]

/proc/bus/usb/devices:

T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 0.00
S:  Product=USB UHCI-alt Root Hub
S:  SerialNumber=fca0
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=255ms
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=059b ProdID=0030 Rev= 1.00
S:  Manufacturer=Iomega
S:  Product=USB Zip 250
S:  SerialNumber=059B00300D002999
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=08(stor.) Sub=06 Prot=50
Driver=usb-storage
E:  Ad=01(O) Atr=02(Bulk) MxPS=  64 Ivl=  0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=  0ms
E:  Ad=83(I) Atr=03(Int.) MxPS=   2 Ivl= 32ms
Quoted 2 lines

-
To unsubscribe from this list: send the line "unsubscribe

linux-kernel" in

Quoted 4 lines

the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/