Skip to contentSkip to conversation

Freescale MPC8540 QUICCstart board

U-Boot-Users Ing.Gianfranco Morandi 2 participants 2 messages Nov 1, 2005

lore
Share & tools
lore
#0 lore raw

Hi to all,

It's almost one year that I'm far from u-boot community and I did not follow the last upgrade of such project.
Now I'm evaluating the MPC85xx processor family to start with a new activity and I found the QUICCstart board which is being sold by freescale with an u-boot image pre-loaded.

Could anybody indicate me the name of the board which identifies the MPC8540-CWH-PPC-8540N-VX freescale part number into the u-boot tree?

And (even though this is out of topic here, please forgive me) anybody knows if this board has been enclosed into the ELDK?

many thanks

Gianfranco

#1 lore raw

Hello,

Quoted 3 lines · in message <003b01c5dec6$743e7bb0$0300a8c0@pc005> you wrote:

And (even though this is out of topic here, please forgive me) anybody knows if this board has been enclosed into the ELDK?

It's supported by the ppc_85xx- set of ELDK tools, but don';t expect to find support for it in the U-Boot or Linux kernel trees that are included with released versions of the ELDK.

Best regards,

Wolfgang Denk

Signature · 5 lines
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
God grant me the senility to accept the things I cannot  change,  The
frustration  to  try to change things I cannot affect, and the wisdom
to tell the difference.