Skip to contentSkip to conversation

ACPI on HP ze4430us

DISCUSSION Konstantin Svist 2 participants 4 messages Dec 28, 2004 – Dec 29, 2004 3 messages not in the archive ACPI

lore
Share & tools
lore
#0 lore raw

*RESEND*

Hi everyone,

I just tried Knoppix 3.7 on my laptop - it doesn't boot. After some playing around, I figured out that the problem is ACPI - it only boots if I specify any of the three "hacks": "acpi=off", "acpi=ht", and "acpi=force". The last one even powers down my laptop on shutdown.
What is going on here?

Thanks,
Konstantin

-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now.
http://productguide.itmanagersjournal.com/

A message that is not in the archive (sent off-list or not yet received): 004201c4ed26$551d24d0$0200a8c0-+2hNPL9WhaWs1BDpvl8NfQ@public.gmane.org

#2 lore raw

Sounds like that knoppix kernel has APM and ACPI support compiled in and APM gets choses on your laptop even though it's not supported so you have to tell the kernel to use ACPI explicitly.

-Herman

Quoted 16 lines · Konstantin Svist

*RESEND*

Hi everyone,

I just tried Knoppix 3.7 on my laptop - it doesn't boot. After some playing around, I figured out that the problem is ACPI - it only boots if I specify any of the three "hacks": "acpi=off", "acpi=ht", and "acpi=force". The last one even powers down my laptop on shutdown.
What is going on here?

Thanks,
Konstantin

Quoted 8 lines

-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now. http://productguide.itmanagersjournal.com/
_______________________________________________
Acpi-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/acpi-devel

-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now. http://productguide.itmanagersjournal.com/

A message that is not in the archive (sent off-list or not yet received): 41D23B5A.9000409-6MNMYbGzEYJWk0Htik3J/[email protected]

#4 lore raw

I see.
So is there a more solution more permanent than the hack? Does that have to do with DSDT?

Konstantin

Quoted 4 lines

Sounds like that knoppix kernel has APM and ACPI support compiled in and APM gets choses on your laptop even though it's not supported so you have to tell the kernel to use ACPI explicitly.

Quoted 8 lines

-Herman

Quoted 6 lines

I just tried Knoppix 3.7 on my laptop - it doesn't boot. After some playing around, I figured out that the problem is ACPI - it only boots if I specify any of the three "hacks": "acpi=off", "acpi=ht", and "acpi=force". The last one even powers down my laptop on shutdown.
What is going on here?

-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now.
http://productguide.itmanagersjournal.com/

A message that is not in the archive (sent off-list or not yet received): 00ad01c4ede0$23b57bd0$0200a8c0-+2hNPL9WhaWs1BDpvl8NfQ@public.gmane.org

#6 lore raw

Those kernel options aren't hacks as far as I know, they're perfectly legitimate. You can recompile the kernel and remove APM support to avoid using them though.

-Herman

Quoted 26 lines · Konstantin Svist

I see.
So is there a more solution more permanent than the hack? Does that have to do with DSDT?

Konstantin

Quoted 4 lines

Sounds like that knoppix kernel has APM and ACPI support compiled in and APM gets choses on your laptop even though it's not supported so you have to tell the kernel to use ACPI explicitly.

Quoted 9 lines

-Herman

Quoted 6 lines

I just tried Knoppix 3.7 on my laptop - it doesn't boot. After some playing around, I figured out that the problem is ACPI - it only boots if I specify any of the three "hacks": "acpi=off", "acpi=ht", and "acpi=force". The last one even powers down my laptop on shutdown.
What is going on here?

Quoted 8 lines

-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now. http://productguide.itmanagersjournal.com/
_______________________________________________
Acpi-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/acpi-devel

-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now. http://productguide.itmanagersjournal.com/