Skip to contentSkip to conversation

Updated: via8233 driver -- testers wanted

DISCUSSION René Kermis 4 participants 13 messages May 31, 2002

lore
Share & tools
lore
#0 lore raw

Hi,

I can't get the driver (cvs-version 1.18) running on a VT8233A (EPoX 8K3A+). I get the following error when trying to play a sound file with aplay:

ALSA lib pcm_hw.c:413:(snd_pcm_hw_drain) SNDRV_PCM_IOCTL_DRAIN failed:
Input/Output error

dmesg-output:

ALSA ../alsa-kernel/core/pcm_lib.c:1871: playback write error (DMA or IRQ trouble?)
...
ALSA ../alsa-kernel/core/pcm_native.c:1093: playback drain error (DMA or IRQ trouble?)

Any suggestions?
René

_______________________________________________________________

Don't miss the 2002 Sprint PCS Application Developer's Conference August 25-28 in Las Vegas -- http://devcon.sprintpcs.com/adp/index.cfm

#1 lore raw

Hi,

I've exectly the same problem. When I use "cat /usr/kde/3/hare/sounds/pop.wav

Quoted 1 line

/dev/dsp", I get a I/O write error. The only thing that works is playing a

CD, I can mute/unmute, set the volume via alsamixer etc. Bye,

Niek.

Quoted 24 lines · René Kermis

Hi,

I can't get the driver (cvs-version 1.18) running on a VT8233A (EPoX 8K3A+). I get the following error when trying to play a sound file with aplay:

ALSA lib pcm_hw.c:413:(snd_pcm_hw_drain) SNDRV_PCM_IOCTL_DRAIN failed:
Input/Output error

dmesg-output:

ALSA ../alsa-kernel/core/pcm_lib.c:1871: playback write error (DMA or IRQ trouble?)
...
ALSA ../alsa-kernel/core/pcm_native.c:1093: playback drain error (DMA or IRQ trouble?)

Any suggestions?
René

_______________________________________________________________

Quoted 7 lines

Don't miss the 2002 Sprint PCS Application Developer's Conference August 25-28 in Las Vegas -- http://devcon.sprintpcs.com/adp/index.cfm

_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel

_______________________________________________________________

Don't miss the 2002 Sprint PCS Application Developer's Conference August 25-28 in Las Vegas -- http://devcon.sprintpcs.com/adp/index.cfm

#2 lore raw
In reply to René Kermis

Hi all,

At Fri, 31 May 2002 10:51:35 +0200,

Quoted 9 lines · René Kermis

Hi,

I can't get the driver (cvs-version 1.18) running on a VT8233A (EPoX 8K3A+). I get the following error when trying to play a sound file with aplay:

ALSA lib pcm_hw.c:413:(snd_pcm_hw_drain) SNDRV_PCM_IOCTL_DRAIN failed:
Input/Output error

Quoted 7 lines

dmesg-output:

ALSA ../alsa-kernel/core/pcm_lib.c:1871: playback write error (DMA or IRQ trouble?)
...
ALSA ../alsa-kernel/core/pcm_native.c:1093: playback drain error (DMA or IRQ trouble?)

it seems like no interrupts are generated during playback. could you check whether the status in /proc/interrupts is changed during playback?

also, could you check whether capture works? capture uses a different SGD, so it might work individually from playback.

(BTW, CD and line-ine can be heard without problems, since they are
routed directly throught ac97, so no sound engine is needed.)

thanks,

Takashi

_______________________________________________________________

Don't miss the 2002 Sprint PCS Application Developer's Conference August 25-28 in Las Vegas -- http://devcon.sprintpcs.com/adp/index.cfm

#3 lore raw
Quoted 8 lines · Takashi Iwai

it seems like no interrupts are generated during playback. could you check whether the status in /proc/interrupts is changed during playback?

also, could you check whether capture works? capture uses a different SGD, so it might work individually from playback.

Quoted 7 lines

(BTW, CD and line-ine can be heard without problems, since they are
routed directly throught ac97, so no sound engine is needed.)

thanks,

Takashi

Hi Takashi,

I tried it, and here are the results:

Before playing:
tussen root # cat /proc/interrupts
CPU0

  0:    3875633          XT-PIC  timer
  1:       6924          XT-PIC  keyboard
  2:          0          XT-PIC  cascade
  5:      21629          XT-PIC  usb-uhci, usb-uhci, eth0
  9:          0          XT-PIC  acpi
 11:          0          XT-PIC  VIA8233
 12:     305308          XT-PIC  PS/2 Mouse
 14:      60038          XT-PIC  ide0
 15:         45          XT-PIC  ide1
NMI:          0
LOC:    3875608
ERR:       4810
MIS:          0

Start playing file:
tussen root # aplay /usr/kde/3/share/sounds/pop.wav
Playing WAVE '/usr/kde/3/share/sounds/pop.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Mono
ALSA lib pcm_hw.c:413:(snd_pcm_hw_drain) SNDRV_PCM_IOCTL_DRAIN failed:
Input/output error

While playing file:
tussen root # cat /proc/interrupts
CPU0

  0:    3882996          XT-PIC  timer
  1:       6940          XT-PIC  keyboard
  2:          0          XT-PIC  cascade
  5:      21629          XT-PIC  usb-uhci, usb-uhci, eth0
  9:          0          XT-PIC  acpi
 11:          0          XT-PIC  VIA8233
 12:     305536          XT-PIC  PS/2 Mouse
 14:      60050          XT-PIC  ide0
 15:         45          XT-PIC  ide1
NMI:          0
LOC:    3882972
ERR:       4810
MIS:          0

After playing file:
tussen root # cat /proc/interrupts
CPU0

  0:    3892526          XT-PIC  timer
  1:       6950          XT-PIC  keyboard
  2:          0          XT-PIC  cascade
  5:      21629          XT-PIC  usb-uhci, usb-uhci, eth0
  9:          0          XT-PIC  acpi
 11:          0          XT-PIC  VIA8233
 12:     305744          XT-PIC  PS/2 Mouse
 14:      60074          XT-PIC  ide0
 15:         45          XT-PIC  ide1
NMI:          0
LOC:    3892501
ERR:       4810

How can I test the capture? Do you mean that I have to plug in a microphone and record a sound or so?

Thanks,

Niek.

_______________________________________________________________

Don't miss the 2002 Sprint PCS Application Developer's Conference August 25-28 in Las Vegas -- http://devcon.sprintpcs.com/adp/index.cfm

#4 lore raw

Hi,

I tried to to record from mic and line in. I have no problems with recording, but the file is empty.

Some very strange things happend on my machine. I tried to use the oss module and it worked without problems. Then I uninstalled the evaluation version and removed the modules from memory and reloaded your modules. Now I can playback sounds without getting an error, but the sound is too fast, exactly 2x faster than it should be. Is it possible, that it is only an initialization problem of the sound chip?

René

----- Original Message -----
From: "Niek van der Maas" <[email protected]>
To: <[email protected]>
Sent: Friday, May 31, 2002 12:36 PM
Subject: Re: [Alsa-devel] Updated: via8233 driver -- testers wanted

Quoted 8 lines · Takashi Iwai

it seems like no interrupts are generated during playback. could you check whether the status in /proc/interrupts is changed during playback?

also, could you check whether capture works? capture uses a different SGD, so it might work individually from playback.

Quoted 7 lines

(BTW, CD and line-ine can be heard without problems, since they are
routed directly throught ac97, so no sound engine is needed.)

thanks,

Takashi

Hi Takashi,

I tried it, and here are the results:

Before playing:
tussen root # cat /proc/interrupts
CPU0

  0:    3875633          XT-PIC  timer
  1:       6924          XT-PIC  keyboard
  2:          0          XT-PIC  cascade
  5:      21629          XT-PIC  usb-uhci, usb-uhci, eth0
  9:          0          XT-PIC  acpi
 11:          0          XT-PIC  VIA8233
 12:     305308          XT-PIC  PS/2 Mouse
 14:      60038          XT-PIC  ide0
 15:         45          XT-PIC  ide1
NMI:          0
LOC:    3875608
ERR:       4810
MIS:          0

Start playing file:
tussen root # aplay /usr/kde/3/share/sounds/pop.wav
Playing WAVE '/usr/kde/3/share/sounds/pop.wav' : Signed 16 bit Little Endian,
Rate 44100 Hz, Mono
ALSA lib pcm_hw.c:413:(snd_pcm_hw_drain) SNDRV_PCM_IOCTL_DRAIN failed:
Input/output error

While playing file:
tussen root # cat /proc/interrupts
CPU0

  0:    3882996          XT-PIC  timer
  1:       6940          XT-PIC  keyboard
  2:          0          XT-PIC  cascade
  5:      21629          XT-PIC  usb-uhci, usb-uhci, eth0
  9:          0          XT-PIC  acpi
 11:          0          XT-PIC  VIA8233
 12:     305536          XT-PIC  PS/2 Mouse
 14:      60050          XT-PIC  ide0
 15:         45          XT-PIC  ide1
NMI:          0
LOC:    3882972
ERR:       4810
MIS:          0

After playing file:
tussen root # cat /proc/interrupts
CPU0

  0:    3892526          XT-PIC  timer
  1:       6950          XT-PIC  keyboard
  2:          0          XT-PIC  cascade
  5:      21629          XT-PIC  usb-uhci, usb-uhci, eth0
  9:          0          XT-PIC  acpi
 11:          0          XT-PIC  VIA8233
 12:     305744          XT-PIC  PS/2 Mouse
 14:      60074          XT-PIC  ide0
 15:         45          XT-PIC  ide1
NMI:          0
LOC:    3892501
ERR:       4810

How can I test the capture? Do you mean that I have to plug in a microphone and record a sound or so?

Thanks,

Niek.

_______________________________________________________________

Don't miss the 2002 Sprint PCS Application Developer's Conference August 25-28 in Las Vegas -- http://devcon.sprintpcs.com/adp/index.cfm

_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel

_______________________________________________________________

Don't miss the 2002 Sprint PCS Application Developer's Conference August 25-28 in Las Vegas -- http://devcon.sprintpcs.com/adp/index.cfm

#5 lore raw

At Fri, 31 May 2002 14:13:28 +0200,

Quoted 5 lines · René Kermis

Hi,

I tried to to record from mic and line in. I have no problems with recording, but the file is empty.

ok, then at least interrupts for capture work well.

Quoted 6 lines

Some very strange things happend on my machine. I tried to use the oss module and it worked without problems. Then I uninstalled the evaluation version and removed the modules from memory and reloaded your modules. Now I can playback sounds without getting an error, but the sound is too fast, exactly 2x faster than it should be. Is it possible, that it is only an initialization problem of the sound chip?

interesting.
that imples, yes, that the initialization of playback channel is incorrect.

Takashi

_______________________________________________________________

Don't miss the 2002 Sprint PCS Application Developer's Conference August 25-28 in Las Vegas -- http://devcon.sprintpcs.com/adp/index.cfm

#6 lore raw
In reply to René Kermis

Hi,

At Fri, 31 May 2002 14:13:28 +0200,

Quoted 6 lines · René Kermis

Hi,

I tried to to record from mic and line in. I have no problems with recording, but the file is empty.

Quoted 6 lines

Some very strange things happend on my machine. I tried to use the oss module and it worked without problems. Then I uninstalled the evaluation version and removed the modules from memory and reloaded your modules. Now I can playback sounds without getting an error, but the sound is too fast, exactly 2x faster than it should be. Is it possible, that it is only an initialization problem of the sound chip?

now found out obvious typos - patch attached (already on cvs). hopefull this fixes the problem...

Takashi

#7 lore raw

Congratulations!!!

It's running, I have many unresolved symbols, but that does not matter, the card runs without trouble, quality is better than from commerical oss-module. I don't hear a difference to my SB 128 PCI with es1370. Now I will try to use the recording function.

Thank you very much!
René

----- Original Message -----
From: "Takashi Iwai" <[email protected]>
To: "René Kermis" <[email protected]>
Cc: <[email protected]>
Sent: Friday, May 31, 2002 3:31 PM
Subject: Re: [Alsa-devel] Updated: via8233 driver -- testers wanted

Quoted 13 lines

Hi,

At Fri, 31 May 2002 14:13:28 +0200,

Quoted 9 lines · René Kermis

Hi,

I tried to to record from mic and line in. I have no problems with recording, but the file is empty.

Some very strange things happend on my machine. I tried to use the oss module and it worked without problems. Then I uninstalled the evaluation version and removed the modules from memory and reloaded your modules.

Now I

Quoted 10 lines
Quoted 3 lines

can playback sounds without getting an error, but the sound is too fast, exactly 2x faster than it should be. Is it possible, that it is only an initialization problem of the sound chip?

now found out obvious typos - patch attached (already on cvs). hopefull this fixes the problem...

Takashi

_______________________________________________________________

Don't miss the 2002 Sprint PCS Application Developer's Conference August 25-28 in Las Vegas -- http://devcon.sprintpcs.com/adp/index.cfm

#8 lore raw

Hi,

I tested the recording function, no problems, I can record via mic and line in.
Perfect work!!!

Thanks a lot,
René

----- Original Message -----
From: "René Kermis" <[email protected]>
To: "Takashi Iwai" <[email protected]>
Cc: <[email protected]>
Sent: Friday, May 31, 2002 3:50 PM
Subject: Re: [Alsa-devel] Updated: via8233 driver -- testers wanted

Quoted 3 lines

Congratulations!!!

It's running, I have many unresolved symbols, but that does not matter,

the

Quoted 7 lines

card runs without trouble, quality is better than from commerical oss-module. I don't hear a difference to my SB 128 PCI with es1370. Now I will try to use the recording function.

Thank you very much!
René

Quoted 20 lines

----- Original Message -----
From: "Takashi Iwai" <[email protected]>
To: "René Kermis" <[email protected]>
Cc: <[email protected]>
Sent: Friday, May 31, 2002 3:31 PM
Subject: Re: [Alsa-devel] Updated: via8233 driver -- testers wanted

Quoted 12 lines

Hi,

At Fri, 31 May 2002 14:13:28 +0200,

Quoted 8 lines · René Kermis

Hi,

I tried to to record from mic and line in. I have no problems with recording, but the file is empty.

Some very strange things happend on my machine. I tried to use the oss module and it worked without problems. Then I uninstalled the

evaluation

Quoted 3 lines
Quoted 1 line
Quoted 1 line

version and removed the modules from memory and reloaded your modules.

Now I

Quoted 1 line
Quoted 1 line

can playback sounds without getting an error, but the sound is too

fast,

Quoted 1 line
Quoted 1 line
Quoted 1 line

exactly 2x faster than it should be. Is it possible, that it is only

an

Quoted 12 lines
Quoted 8 lines
Quoted 1 line

initialization problem of the sound chip?

now found out obvious typos - patch attached (already on cvs). hopefull this fixes the problem...

Takashi

_______________________________________________________________

Quoted 8 lines

Don't miss the 2002 Sprint PCS Application Developer's Conference August 25-28 in Las Vegas -- http://devcon.sprintpcs.com/adp/index.cfm

_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel

_______________________________________________________________

Don't miss the 2002 Sprint PCS Application Developer's Conference August 25-28 in Las Vegas -- http://devcon.sprintpcs.com/adp/index.cfm

#9 lore raw
In reply to Niek van der Maas

Sorry,

forgot to mention, that I cannot check the status of the interrupt, because there are other devices on the same interrupt (NIC and SCSI-adapter). I could not find an option in my bios to give the audio chip an own interrupt.

CPU0

  0:    1551713          XT-PIC  timer
  1:       6143          XT-PIC  keyboard
  2:          0          XT-PIC  cascade
  8:          1          XT-PIC  rtc
 11:     814617          XT-PIC  AM53C974, eth0, VIA8233
 12:      35795          XT-PIC  hpt37x2
NMI:          0
LOC:    1551630
ERR:        272
MIS:          0

René

----- Original Message -----
From: "Niek van der Maas" <[email protected]>
To: <[email protected]>
Sent: Friday, May 31, 2002 12:36 PM
Subject: Re: [Alsa-devel] Updated: via8233 driver -- testers wanted

Quoted 8 lines · Takashi Iwai

it seems like no interrupts are generated during playback. could you check whether the status in /proc/interrupts is changed during playback?

also, could you check whether capture works? capture uses a different SGD, so it might work individually from playback.

Quoted 7 lines

(BTW, CD and line-ine can be heard without problems, since they are
routed directly throught ac97, so no sound engine is needed.)

thanks,

Takashi

Hi Takashi,

I tried it, and here are the results:

Before playing:
tussen root # cat /proc/interrupts
CPU0

  0:    3875633          XT-PIC  timer
  1:       6924          XT-PIC  keyboard
  2:          0          XT-PIC  cascade
  5:      21629          XT-PIC  usb-uhci, usb-uhci, eth0
  9:          0          XT-PIC  acpi
 11:          0          XT-PIC  VIA8233
 12:     305308          XT-PIC  PS/2 Mouse
 14:      60038          XT-PIC  ide0
 15:         45          XT-PIC  ide1
NMI:          0
LOC:    3875608
ERR:       4810
MIS:          0

Start playing file:
tussen root # aplay /usr/kde/3/share/sounds/pop.wav
Playing WAVE '/usr/kde/3/share/sounds/pop.wav' : Signed 16 bit Little Endian,
Rate 44100 Hz, Mono
ALSA lib pcm_hw.c:413:(snd_pcm_hw_drain) SNDRV_PCM_IOCTL_DRAIN failed:
Input/output error

While playing file:
tussen root # cat /proc/interrupts
CPU0

  0:    3882996          XT-PIC  timer
  1:       6940          XT-PIC  keyboard
  2:          0          XT-PIC  cascade
  5:      21629          XT-PIC  usb-uhci, usb-uhci, eth0
  9:          0          XT-PIC  acpi
 11:          0          XT-PIC  VIA8233
 12:     305536          XT-PIC  PS/2 Mouse
 14:      60050          XT-PIC  ide0
 15:         45          XT-PIC  ide1
NMI:          0
LOC:    3882972
ERR:       4810
MIS:          0

After playing file:
tussen root # cat /proc/interrupts
CPU0

  0:    3892526          XT-PIC  timer
  1:       6950          XT-PIC  keyboard
  2:          0          XT-PIC  cascade
  5:      21629          XT-PIC  usb-uhci, usb-uhci, eth0
  9:          0          XT-PIC  acpi
 11:          0          XT-PIC  VIA8233
 12:     305744          XT-PIC  PS/2 Mouse
 14:      60074          XT-PIC  ide0
 15:         45          XT-PIC  ide1
NMI:          0
LOC:    3892501
ERR:       4810

How can I test the capture? Do you mean that I have to plug in a microphone and record a sound or so?

Thanks,

Niek.

_______________________________________________________________

Don't miss the 2002 Sprint PCS Application Developer's Conference August 25-28 in Las Vegas -- http://devcon.sprintpcs.com/adp/index.cfm

_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel

_______________________________________________________________

Don't miss the 2002 Sprint PCS Application Developer's Conference August 25-28 in Las Vegas -- http://devcon.sprintpcs.com/adp/index.cfm

#10 lore raw

I tried to measure the interrupts. Here are the results:

If I don't play sounds, I have about 1 interrupt/sec on interrupt 11. If I play a mp3 with mpg321 (44,1kHz, 16bit), I get about 1375 interrupts/sec.
All values are measured after initializing the chip with oss-module, removing it from memory and reloading alsa-module. If I don't load the oss-module before and remove it, there are no interrupts used.

René
----- Original Message -----
From: "René Kermis" <[email protected]>
To: <[email protected]>
Sent: Friday, May 31, 2002 2:33 PM
Subject: Re: [Alsa-devel] Updated: via8233 driver -- testers wanted

Quoted 3 lines

Sorry,

forgot to mention, that I cannot check the status of the interrupt,

because

Quoted 2 lines

there are other devices on the same interrupt (NIC and SCSI-adapter). I could not find an option in my bios to give the audio chip an own

interrupt.

Quoted 102 lines

CPU0

  0:    1551713          XT-PIC  timer
  1:       6143          XT-PIC  keyboard
  2:          0          XT-PIC  cascade
  8:          1          XT-PIC  rtc
 11:     814617          XT-PIC  AM53C974, eth0, VIA8233
 12:      35795          XT-PIC  hpt37x2
NMI:          0
LOC:    1551630
ERR:        272
MIS:          0

René

----- Original Message -----
From: "Niek van der Maas" <[email protected]>
To: <[email protected]>
Sent: Friday, May 31, 2002 12:36 PM
Subject: Re: [Alsa-devel] Updated: via8233 driver -- testers wanted

Quoted 8 lines · Takashi Iwai

it seems like no interrupts are generated during playback. could you check whether the status in /proc/interrupts is changed during playback?

also, could you check whether capture works? capture uses a different SGD, so it might work individually from playback.

Quoted 7 lines

(BTW, CD and line-ine can be heard without problems, since they are
routed directly throught ac97, so no sound engine is needed.)

thanks,

Takashi

Hi Takashi,

I tried it, and here are the results:

Before playing:
tussen root # cat /proc/interrupts
CPU0

  0:    3875633          XT-PIC  timer
  1:       6924          XT-PIC  keyboard
  2:          0          XT-PIC  cascade
  5:      21629          XT-PIC  usb-uhci, usb-uhci, eth0
  9:          0          XT-PIC  acpi
 11:          0          XT-PIC  VIA8233
 12:     305308          XT-PIC  PS/2 Mouse
 14:      60038          XT-PIC  ide0
 15:         45          XT-PIC  ide1
NMI:          0
LOC:    3875608
ERR:       4810
MIS:          0

Start playing file:
tussen root # aplay /usr/kde/3/share/sounds/pop.wav
Playing WAVE '/usr/kde/3/share/sounds/pop.wav' : Signed 16 bit Little Endian,
Rate 44100 Hz, Mono
ALSA lib pcm_hw.c:413:(snd_pcm_hw_drain) SNDRV_PCM_IOCTL_DRAIN failed:
Input/output error

While playing file:
tussen root # cat /proc/interrupts
CPU0

  0:    3882996          XT-PIC  timer
  1:       6940          XT-PIC  keyboard
  2:          0          XT-PIC  cascade
  5:      21629          XT-PIC  usb-uhci, usb-uhci, eth0
  9:          0          XT-PIC  acpi
 11:          0          XT-PIC  VIA8233
 12:     305536          XT-PIC  PS/2 Mouse
 14:      60050          XT-PIC  ide0
 15:         45          XT-PIC  ide1
NMI:          0
LOC:    3882972
ERR:       4810
MIS:          0

After playing file:
tussen root # cat /proc/interrupts
CPU0

  0:    3892526          XT-PIC  timer
  1:       6950          XT-PIC  keyboard
  2:          0          XT-PIC  cascade
  5:      21629          XT-PIC  usb-uhci, usb-uhci, eth0
  9:          0          XT-PIC  acpi
 11:          0          XT-PIC  VIA8233
 12:     305744          XT-PIC  PS/2 Mouse
 14:      60074          XT-PIC  ide0
 15:         45          XT-PIC  ide1
NMI:          0
LOC:    3892501
ERR:       4810
Quoted 1 line

How can I test the capture? Do you mean that I have to plug in a

microphone

Quoted 20 lines

and record a sound or so?

Thanks,

Niek.

_______________________________________________________________

Don't miss the 2002 Sprint PCS Application Developer's Conference August 25-28 in Las Vegas -- http://devcon.sprintpcs.com/adp/index.cfm

_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel

_______________________________________________________________

Quoted 8 lines

Don't miss the 2002 Sprint PCS Application Developer's Conference August 25-28 in Las Vegas -- http://devcon.sprintpcs.com/adp/index.cfm

_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel

_______________________________________________________________

Don't miss the 2002 Sprint PCS Application Developer's Conference August 25-28 in Las Vegas -- http://devcon.sprintpcs.com/adp/index.cfm

#11 lore raw

YES!!!!!!

I downloaded revision 1.19 of the via8233.c file, and it works!!! Really great work!

Takashi, thanks a lot for writing this driver!

Greetings,

Niek.

_______________________________________________________________

Don't miss the 2002 Sprint PCS Application Developer's Conference August 25-28 in Las Vegas -- http://devcon.sprintpcs.com/adp/index.cfm

#12 lore raw
Quoted 3 lines

I downloaded revision 1.19 of the via8233.c file, and it works!!! Really great work!

It also works with Soltek SL-75DRV4 - VT8233A sb.

Thanks,
Vlad

Signature · 11 lines
*=================================================
* Vlad Danego
*                          Nic-handles: VD437
* E-mail: [email protected]                 VLAD5-RIPE
*         [email protected]          VLAD-UANIC
*=================================================

_______________________________________________________________

Don't miss the 2002 Sprint PCS Application Developer's Conference
August 25-28 in Las Vegas -- http://devcon.sprintpcs.com/adp/index.cfm