Does U-boot support ethernet chip LAN9210 from SMSC?
Hi,
Does U-boot support ethernet chip LAN9210 from SMSC? If yes, how can I get driver source code?
Best Regards.
Seung Youl.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20080630/c687a0c0/attachment.htm
Hi Seung,
Quoted 5 lines · ???
Hi,
Does U-boot support ethernet chip LAN9210 from SMSC? If yes, how can I get driver source code?
The smc911x driver claims to support many different 9[12]1x chips, although I can't speak for certain about the 9210. It was added recently, so be sure to clone the latest source tree. Have a look in drivers/net/smc911x.c
regards,
Ben
Hi Ben,
Sorry for bothering you.
I have downloaded the latest version of U-boot. There is smc911x.c file. I have added this file to Makefile. The compilation is successful.
But, there are two problems.
1. there is no LAN9210 entry in chip id list
2. Only 32-bit is supported.
Is there any recent driver for LAN9210?
----- Original Message -----
From: "Ben Warren" <[email protected]>
To: "???" <[email protected]>
Cc: <[email protected]>
Sent: Monday, June 30, 2008 12:25 PM
Subject: Re: [U-Boot-Users] Does U-boot support ethernet chip LAN9210 from SMSC?
Quoted 16 lines
Hi Seung,
Quoted 5 lines · ???
Hi,
Does U-boot support ethernet chip LAN9210 from SMSC? If yes, how can I get driver source code?
The smc911x driver claims to support many different 9[12]1x chips, although I can't speak for certain about the 9210. It was added recently, so be sure to clone the latest source tree. Have a look in
drivers/net/smc911x.cregards,
Ben
Quoted 7 lines · ???
Hi Ben,
Sorry for bothering you.
I have downloaded the latest version of U-boot. There is
smc911x.cfile. I have added this file toMakefile. The compilation is successful.
You don't have to add anything to the Makefile, just use the correct CONFIG options
Quoted 3 lines
But, there are two problems.
1. there is no LAN9210 entry in chip id list
So add it. I haven't looked at the LAN9210 data sheet to even know if it will work with this chip. You're going to have to do some work.
Quoted 2 lines
2. Only 32-bit is supported.
Not true. Both 16 and 32 bit access is supported. Check the source code (hint: look for CONFIG_DRIVER_SMC911X_16_BIT)
Quoted 1 line
Is there any recent driver for LAN9210?
I don't know of another or I would have told you about it.
Good luck,
Ben
Hi Ben,
I have found smc911x.c source code in which both 16 and 32 bit access are supported. I will test my board with this source code.
Thank you.
Best Regards,
Seung Youl.
----- Original Message -----
From: "Ben Warren" <[email protected]>
To: "???" <[email protected]>
Cc: <[email protected]>
Sent: Monday, June 30, 2008 2:43 PM
Subject: Re: [U-Boot-Users] Does U-boot support ethernet chip LAN9210 from SMSC?
Quoted 26 lines · ???
Quoted 7 lines
Hi Ben,
Sorry for bothering you.
I have downloaded the latest version of U-boot. There is
smc911x.cfile. I have added this file toMakefile. The compilation is successful.You don't have to add anything to the
Makefile, just use the correct CONFIG optionsQuoted 3 lines
But, there are two problems.
1. there is no LAN9210 entry in chip id listSo add it. I haven't looked at the LAN9210 data sheet to even know if it will work with this chip. You're going to have to do some work.
Quoted 2 lines
2. Only 32-bit is supported.
Not true. Both 16 and 32 bit access is supported. Check the source code (hint: look for
CONFIG_DRIVER_SMC911X_16_BIT)Quoted 1 line
Is there any recent driver for LAN9210?
I don't know of another or I would have told you about it.
Good luck,
Ben
Quoted 5 lines · ???
Hi Ben,
I have found
smc911x.csource code in which both 16 and 32 bit access are supported. I will test my board with this source code.
Once you have it working, please send a patch indicating changes you've made.
regards,
Ben