2.6.4-rc1 problems with e100 & 3c59x
I've searched the archives as well as googled around without any luck regarding my situation. BTW, please CC me as I'm no longer subscribed (furthering my education has prevented me from keeping up with the list).
Anyways, I have the following two network cards:
02:04.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 30)
Subsystem: 3Com Corporation 3C905B Fast Etherlink XL 10/100
Flags: bus master, medium devsel, latency 32, IRQ 16 I/O ports at a000 [size=128]
Memory at fb025000 (32-bit, non-prefetchable) [size=128] Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: <available only to root>
00: b7 10 55 90 07 00 10 02 30 00 00 02 08 20 00 00
10: 01 a0 00 00 00 50 02 fb 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 b7 10 55 90
30: 00 00 00 00 dc 00 00 00 00 00 00 00 07 01 0a 0a
02:07.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 0d)
Subsystem: Intel Corp. EtherExpress PRO/100 Server Adapter
Flags: bus master, medium devsel, latency 32, IRQ 16 Memory at fb024000 (32-bit, non-prefetchable) [size=4K] I/O ports at ac00 [size=64]
Memory at fb000000 (32-bit, non-prefetchable) [size=128K] Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: <available only to root>
00: 86 80 29 12 07 00 90 02 0d 00 00 02 08 20 00 00
10: 00 40 02 fb 01 ac 00 00 00 00 00 fb 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 42 10
30: 00 00 00 00 dc 00 00 00 00 00 00 00 07 01 08 38
Using 2.4.x (including the latest stable), I've had no trouble getting these cards to work as modules. However, when I upgraded to 2.6.0 I couldn't get them to work as modules, but finally tried compiling them into the kernel and all was well until 2.6.4-rc1. Now, no matter what I do, compiled in or as modules, I can not get both cards working.
The structure of the network is:
eth0 is the Intel card - internal network (alias eth0 e100) eth1 is the 3Com card - cable modem (alias eth1 3c59x)
When attempting to compile 2.6.4-rc1 with modules, I see this in the logs:
Feb 28 22:31:29 jupiter kernel: 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html Feb 28 22:31:29 jupiter kernel: 0000:02:04.0: 3Com PCI 3c905B Cyclone 100baseTx at 0xa000. Vers LK1.1.19 Feb 28 22:31:29 jupiter kernel: e100: Intel(R) PRO/100 Network Driver, 3.0.15 Feb 28 22:31:29 jupiter kernel: e100: Copyright(c) 1999-2004 Intel Corporation Feb 28 22:31:29 jupiter kernel: e100: eth1: e100_probe: addr 0xfb024000,
irq 16, MAC addr 00:ED:20:7F:3A:55
As you can see, e100 is coming up as eth1, which is not correct. I assume 3c59x has probably grabbed eth0, which also is not correct. When configured for modules, is eth0 always the first card found? At any rate, I tried switching the cables on the network cards to see if it would work like that, but unfortunately it didn't.
Can anyone please give me some clue as to what might be wrong? My network is working fine with the drivers compiled in 2.6.3 (but not as modules). I can't get 2.6.4-rc1 to work at all with my network cards.
Please help! (Please CC me)
Thanks,
Steve
--- Steve Lee <[email protected]> a écrit : > I've searched the
archives as well as googled around without
Quoted 43 lines
any luck
regarding my situation. BTW, please CC me as I'm no longer subscribed
(furthering my education has prevented me from keeping up with the
list).Anyways, I have the following two network cards:
02:04.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone]
(rev 30)
Subsystem: 3Com Corporation 3C905B Fast Etherlink XL
10/100Flags: bus master, medium devsel, latency 32, IRQ 16 I/O ports at a000 [size=128] Memory at fb025000 (32-bit, non-prefetchable)[size=128]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: <available only to root>
00: b7 10 55 90 07 00 10 02 30 00 00 02 08 20 00 00 10: 01 a0 00 00 00 50 02 fb 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 b7 10 55 90 30: 00 00 00 00 dc 00 00 00 00 00 00 00 07 01 0a 0a02:07.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100]
(rev 0d)
Subsystem: Intel Corp. EtherExpress PRO/100 Server
Adapter
Flags: bus master, medium devsel, latency 32, IRQ 16 Memory atfb024000(32-bit, non-prefetchable)
[size=4K]I/O ports at ac00 [size=64] Memory at fb000000 (32-bit, non-prefetchable)[size=128K]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: <available only to root>
00: 86 80 29 12 07 00 90 02 0d 00 00 02 08 20 00 00 10: 00 40 02 fb 01 ac 00 00 00 00 00 fb 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 42 10 30: 00 00 00 00 dc 00 00 00 00 00 00 00 07 01 08 38
Quoted 11 lines
Using 2.4.x (including the latest stable), I've had no trouble getting
these cards to work as modules. However, when I upgraded to 2.6.0 I
couldn't get them to work as modules, but finally tried compiling them
into the kernel and all was well until 2.6.4-rc1. Now, no matter what I
do, compiled in or as modules, I can not get both cards working.
did you upgraded from modutils to module-init-tools ?
Quoted 7 lines
Please help! (Please CC me)
Thanks,
Steve
Quoted 7 lines
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected] More majordomo info at
http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
=====
--
A mouse is a device used to point at
the xterm you want to type in.
Kim Alm on a.s.r.
Yahoo! Mail : votre e-mail personnel et gratuit qui vous suit partout ! Créez votre Yahoo! Mail sur http://fr.benefits.yahoo.com/
Dialoguez en direct avec vos amis grâce à Yahoo! Messenger !Téléchargez Yahoo! Messenger sur http://fr.messenger.yahoo.com
Quoted 57 lines · Steve Lee
I've searched the archives as well as googled around without any luck regarding my situation. BTW, please CC me as I'm no longer subscribed (furthering my education has prevented me from keeping up with the list).
Anyways, I have the following two network cards:
02:04.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 30)
Subsystem: 3Com Corporation 3C905B Fast Etherlink XL 10/100
Flags: bus master, medium devsel, latency 32, IRQ 16 I/O ports at a000 [size=128]
Memory atfb025000(32-bit, non-prefetchable) [size=128] Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: <available only to root>
00: b7 10 55 90 07 00 10 02 30 00 00 02 08 20 00 00
10: 01 a0 00 00 00 50 02 fb 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 b7 10 55 90
30: 00 00 00 00 dc 00 00 00 00 00 00 00 07 01 0a 0a02:07.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 0d)
Subsystem: Intel Corp. EtherExpress PRO/100 Server Adapter
Flags: bus master, medium devsel, latency 32, IRQ 16 Memory atfb024000(32-bit, non-prefetchable) [size=4K] I/O ports at ac00 [size=64]
Memory atfb000000(32-bit, non-prefetchable) [size=128K] Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: <available only to root>
00: 86 80 29 12 07 00 90 02 0d 00 00 02 08 20 00 00
10: 00 40 02 fb 01 ac 00 00 00 00 00 fb 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 42 10
30: 00 00 00 00 dc 00 00 00 00 00 00 00 07 01 08 38Using 2.4.x (including the latest stable), I've had no trouble getting these cards to work as modules. However, when I upgraded to 2.6.0 I couldn't get them to work as modules, but finally tried compiling them into the kernel and all was well until 2.6.4-rc1. Now, no matter what I do, compiled in or as modules, I can not get both cards working.
The structure of the network is:
eth0 is the Intel card - internal network (alias eth0 e100) eth1 is the 3Com card - cable modem (alias eth1 3c59x)
When attempting to compile 2.6.4-rc1 with modules, I see this in the logs:
Feb 28 22:31:29 jupiter kernel: 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html Feb 28 22:31:29 jupiter kernel: 0000:02:04.0: 3Com PCI 3c905B Cyclone 100baseTx at 0xa000. Vers LK1.1.19 Feb 28 22:31:29 jupiter kernel: e100: Intel(R) PRO/100 Network Driver, 3.0.15 Feb 28 22:31:29 jupiter kernel: e100: Copyright(c) 1999-2004 Intel Corporation Feb 28 22:31:29 jupiter kernel: e100: eth1: e100_probe: addr 0xfb024000,
Quoted 7 lines
irq 16, MAC addr 00:ED:20:7F:3A:55
As you can see, e100 is coming up as eth1, which is not correct. I assume 3c59x has probably grabbed eth0, which also is not correct. When configured for modules, is eth0 always the first card found? At any rate, I tried switching the cables on the network cards to see if it would work like that, but unfortunately it didn't.
The order of ethX is dependent on the link order, when you build modules into the kernel. So, yes, eth0 is always the first card found.
Jeff
Quoted 8 lines · Steve Lee
I've searched the archives as well as googled around without any luck regarding my situation. BTW, please CC me as I'm no longer subscribed (furthering my education has prevented me from keeping up with the list).
Can anyone please give me some clue as to what might be wrong? My network is working fine with the drivers compiled in 2.6.3 (but not as modules). I can't get 2.6.4-rc1 to work at all with my network cards.
One thing to make sure is that you're using /etc/modprobe.conf and don't load the modules manually.
Zwane
I am using /etc/modprobe.conf and I don't load any modules manually. This is mostly a module kernel, the only problem I'm having is with the network. 2.6.3 does work with the drivers compiled in (but not as modules). 2.6.4-rc1 I can not get to work at all (modules or builtin). Thanks for your suggestion.
Steve
-----Original Message-----
From: Zwane Mwaikambo [mailto:[email protected]]
Sent: Tuesday, March 02, 2004 2:00 AM
To: Steve Lee
Cc: [email protected]
Subject: Re: 2.6.4-rc1 problems with e100 & 3c59x
Quoted 8 lines · Steve Lee
I've searched the archives as well as googled around without any luck regarding my situation. BTW, please CC me as I'm no longer subscribed (furthering my education has prevented me from keeping up with the list).
Can anyone please give me some clue as to what might be wrong? My network is working fine with the drivers compiled in 2.6.3 (but not as modules). I can't get 2.6.4-rc1 to work at all with my network cards.
One thing to make sure is that you're using /etc/modprobe.conf and don't load the modules manually.
Zwane
Quoted 5 lines · Steve Lee
I am using
/etc/modprobe.confand I don't load any modules manually. This is mostly a module kernel, the only problem I'm having is with the network. 2.6.3 does work with the drivers compiled in (but not as modules). 2.6.4-rc1 I can not get to work at all (modules or builtin). Thanks for your suggestion.
Ahh, the reason i mentioned that was because i switched to modular network drivers myself and was editing the wrong /etc file. I also happen to have an e100 and 3c59x which i wanted to load in a specific order. I take it you've already verified module-init-tools versions as requested?
Zwane