Skip to contentSkip to conversation

how to clear the conntrack table!

DISCUSSION Decoy 7 participants 9 messages Jun 27, 2003 – Aug 25, 2003 netfilter

lore
Share & tools
lore
#1 lore raw
Quoted 3 lines · Decoy

Hi!

how can I clear the conntrack table?!

unfortunately there is currently no other way than to unload and reload the ip_conntrack module :(

Quoted 2 lines

Thanks very much!
dec0y

Signature · 5 lines
- Harald Welte <[email protected]>             http://www.netfilter.org/
============================================================================
  "Fragmentation is like classful addressing -- an interesting early
   architectural error that shows how much experimentation was going
   on while IP was being designed."                    -- Paul Vixie
#2 lore raw

You could look into using the patch I send some day ago. the you could set all connection to unconfirmed, and then set you rule set so that al unconfirmed packets pass the rule set

/flavio

Quoted 10 lines · Harald Welte
Quoted 3 lines · Decoy

Hi!

how can I clear the conntrack table?!

unfortunately there is currently no other way than to unload and reload the ip_conntrack module :(

Quoted 2 lines

Thanks very much!
dec0y

#3 lore raw
In reply to Harald Welte
Quoted 2 lines · Harald Welte

unfortunately there is currently no other way than to unload and reload the ip_conntrack module :(

I've tried this a couple of times. The module seems to get deleted (lsmod still shows ip_conntrack but as deleted) but rmmod does NOT finish. It grabs 100% CPU for minutes. I had to reboot the box then. Any hints?

Regards,
Eicke.

#4 lore raw

In case your running an older kernel (before -pre9), try the latest -rc kernel or submitted/70_ip-conntrack-expect-drop-refcnt-combined.patch from patch-o-matic.

Bye,
Patrick

Quoted 13 lines · Eicke Friedrich
Quoted 2 lines · Harald Welte

unfortunately there is currently no other way than to unload and reload the ip_conntrack module :(

I've tried this a couple of times. The module seems to get deleted (lsmod still shows ip_conntrack but as deleted) but rmmod does NOT finish. It grabs 100% CPU for minutes. I had to reboot the box then. Any hints?

Regards,
Eicke.

#5 lore raw

Where is conntrack in the iptables chain?

In reply to Harald Welte

I was wondering, where in the iptables chain does conntrack start? In the segment of the chain, does it ack before or after inserted rules (like QUEUE)? Thanks in advance!

-Scott

__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com

#6 lore raw

Re: Where is conntrack in the iptables chain?

Quoted 3 lines · Scott MacKay

I was wondering, where in the iptables chain does conntrack start? In the segment of the chain, does it ack before or after inserted rules (like QUEUE)?

What do you mean with 'does it ack'? conntracking is not supposed to pass verdicts on a packet, it's just looking up tracking information for a passing packet.

That connection lookup happens before all other hooks, i.e. before a packet enters iptables in the mangle table PREROUTING chain. Thus, even rules in the prerouting chain can already use the tracking information.

Does that answer your question?

best regards
Patrick

#7 lore raw

Re: Where is conntrack in the iptables chain?

Lol, ack = act. Only 1 cup of coffee this morning...

--- Patrick Schaaf <[email protected]> wrote:
<snip>

Quoted 9 lines

That connection lookup happens before all other hooks, i.e. before a
packet enters iptables in the mangle table PREROUTING chain. Thus,
even rules in the prerouting chain can already use the tracking
information.

Does that answer your question?

Yup. Are there any examples of how to manipulate packets prior to conntrack, either as a loadable module or via iptables? I seem to recall a patch which added raw tables that acted before anything else but do not recall which rev of iptables it acted on...

-Scott

__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com

#8 lore raw

Re: Where is conntrack in the iptables chain?

Quoted 5 lines

Yup. Are there any examples of how to manipulate packets prior to conntrack, either as a loadable module or via iptables? I seem to recall a patch which added raw tables that acted before anything else but do not recall which rev of iptables it acted on...

Hi again,

you want to look at the general netfilter hooks, and how their priorities work. You can look at the iptables kernel source for inspiration, it's rather simple. In net/ipv4/netfilter, grep for nf_register_hook, and look at the argument to that function, usually a locally defined constant struct. The conntrack hooking is in ip_conntrack_standalone.c. Notice the NF_IP_PRI_CONNTRACK in the struct definition:
this is defined in include/linux/netfilter_ipv4.h, and represents a numerical priority value; for each
hook that the core network stack runs, the hook functions for all registered modules, are called
in numerically ascending priority order. Specifically, NF_IP_PRI_CONNTRACK is the lowest, numerically -200, so for your own hook, you'll need something even below that value, e.g. -201.

all the best
Patrick