Problem With the Inquiry and RFCOMM conexions
Hi,
I have a problem with make a Inquiry and RFCOMM conexions at the same time and don´t understand why.....(with BlueZ).
Is It possible in the same module of bluetooth make a inquiry (independ thread) and RFCOMM conexions (4 o 5 conexions in independ threads) at the same time?
If I use diferent handles for this the call HCI to the module ... Is it independient?
Have somebody any experience in this sense?
Regards,
Sir Graham.
Marcel Holtmann
maintainerHi,
Quoted 2 lines
I have a problem with make a Inquiry and RFCOMM conexions at the same time and don=C2=B4t understand why.....(with BlueZ).
this is a limitation of the hardware. What does "hciconfig hci0 version" tell you?
Regards
Marcel
-------------------------------------------------------
This SF.Net email is sponsored by xPML, a groundbreaking scripting language that extends applications into web and mobile media. Attend the live webcast and join the prime developer group breaking into this new coding territory!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel
Hi Marcel,
Thanks very much for you answer....
"limitation of the hardware"..? I use modules BT 2.0 for this ....
Info of hciconfig hci0 version:
hci0: Type: UART
BD Address: 00:07:80:XX:XX:XX ACL MTU: 384:8 SCO MTU: 64:8
HCI Ver: 2.0 (0x3) HCI Rev: 0xa42 LMP Ver: 2.0 (0x3) LMP Subver:=200xa42
Manufacturer: Cambridge Silicon Radio (10)
The inquiry and the RFCOMM in blueZ have diferent handles. I understand t= he=20
calls hci to module don=C2=B4t mixed ....
Why if I send data over RFCOMM channels the inquiry don=C2=B4t find any d= evice?
I don=C2=B4t send any data, mantaint the conexion, the inquiry works with= any=20
problem.... =C2=BF=C2=BF???
The Inquiry works in a independient thread, and every conexion RFCOMM hav= e=20
his own thread also....
Any idea?
Regards,
Sir Graham.
----- Original Message -----=20
From: "Marcel Holtmann" <[email protected]>
To: <[email protected]>
Sent: Monday, March 13, 2006 2:32 PM
Subject: Re: [Bluez-devel] Problem With the Inquiry and RFCOMM conexions
Hi,
Quoted 2 lines
I have a problem with make a Inquiry and RFCOMM conexions at the same time and don=C2=B4t understand why.....(with BlueZ).
this is a limitation of the hardware. What does "hciconfig hci0 version" tell you?
Regards
Marcel
-------------------------------------------------------
This SF.Net email is sponsored by xPML, a groundbreaking scripting langua= ge
that extends applications into web and mobile media. Attend the live webc= ast
and join the prime developer group breaking into this new coding territor= y!
http://sel.as-us.falkag.net/sel?cmd=3Dk&kid=110944&bid$1720&dat=121642
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel=20
-------------------------------------------------------
This SF.Net email is sponsored by xPML, a groundbreaking scripting language that extends applications into web and mobile media. Attend the live webcast and join the prime developer group breaking into this new coding territory!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel
Marcel Holtmann
maintainerHi,
Quoted 7 lines
"limitation of the hardware"..? I use modules BT 2.0 for this ....
=20
Info of hciconfig hci0 version:
=20
hci0: Type: UARTBD Address: 00:07:80:XX:XX:XX ACL MTU: 384:8 SCO MTU: 64:8 HCI Ver: 2.0 (0x3) HCI Rev: 0xa42 LMP Ver: 2.0 (0x3) LMP Subver=
:=20
Quoted 5 lines
0xa42
Manufacturer: Cambridge Silicon Radio (10)
=20
=20
The inquiry and the RFCOMM in blueZ have diferent handles. I understand=
the=20
Quoted 1 line
calls hci to module don=C2=B4t mixed ....
it is still the same hardware. The number of handles doesn't matter.
Quoted 1 line
Why if I send data over RFCOMM channels the inquiry don=C2=B4t find any=
device?
Quoted 1 line
I don=C2=B4t send any data, mantaint the conexion, the inquiry works wi=
th any=20
Quoted 1 line
problem.... =C2=BF=C2=BF???
I can't answer this. You might get lucky and get an answer for the CSR experts.
Regards
Marcel
-------------------------------------------------------
This SF.Net email is sponsored by xPML, a groundbreaking scripting language that extends applications into web and mobile media. Attend the live webcast and join the prime developer group breaking into this new coding territory!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel