Need help in mounting two-LUN atapi flash card reader
Hi,
Need help in mouting two-LUN atapi flash card reader.
Linux Distribution - Redhat 8.0
Kernal version - 2.4.18-14
Details about the device attempting to mount:
1. The device used for mounting is a Atap flash card reader and it is not an USB device. It uses 40-PIN ide connector and cable. It is connected as secondary master to the linux system.
2. Size of the device matches to that off floppy drive. It has one connector for CompactFlash --- for LUN0 and second connector for SmartMedia/MMC/MS --- for LUN1.
Appreciate your help.
With best regards
Karthi
With best regards,
Karthi
OnSpec Electronic Inc
On Maw, 2004-08-24 at 02:57, Karthi Jothi wrote
Quoted 4 lines
Need help in mouting two-LUN atapi flash card reader.
1. The device used for mounting is a Atap flash card reader and it is not an USB device. It uses 40-PIN ide connector and cable. It is connected as secondary master to the linux system.
The ide-scsi driver handles multiple luns but in 2.4 the default behaviour most vendors shipped was "do not probe extra luns". There is a scsi black/whitelist table that is used to vary the behaviour or the max_scsi_luns option to the scsi layer should also work.
2.6 is meant to be a bit more intelligent about this and my Nakamichi CD changer seems to do the right thing.
Alan