Hauppage Nova: doesn't know how to handle a DVBv3 call to delivery system 0
I have followed the build instructions for the Hauppauge MyTV.t device here
- http://linuxtv.org/wiki/index.php/Hauppauge_myTV.t and built the drivers as detailed here -
http://linuxtv.org/wiki/index.php/How_to_Obtain,_Build_and_Install_V4L-DVB_Device_Drivers on a CentOS 6.2 i386 build.
When I use dvbscan, nothing happens. dmesg shows "dvb_frontend_ioctl_legacy: doesn't know how to handle a DVBv3 call to delivery system 0"
[root@cos6 ~]# cd /usr/bin
[root@cos6 bin]# ./dvbscan /usr/share/dvb/dvb-t/uk-Hannington > /usr/share/dvb/dvb-t/channels.conf
[root@cos6 bin]# dmesg | grep dvb
dvb-usb: found a 'Hauppauge Nova-T MyTV.t' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
dvb-usb: schedule remote query interval to 50 msecs.
dvb-usb: Hauppauge Nova-T MyTV.t successfully initialized and connected.
usbcore: registered new interface driver dvb_usb_dib0700dvb_frontend_ioctl_legacy: doesn't know how to handle a DVBv3 call to delivery system 0
I have searched but can't locate a fix. Any pointers?
Il 15/01/2012 00:41, RazzaList ha scritto:
Quoted 23 lines
I have followed the build instructions for the Hauppauge MyTV.t device here
- http://linuxtv.org/wiki/index.php/Hauppauge_myTV.t and built the drivers as detailed here -
http://linuxtv.org/wiki/index.php/How_to_Obtain,_Build_and_Install_V4L-DVB_Device_Driverson a CentOS 6.2 i386 build.When I use dvbscan, nothing happens. dmesg shows "
dvb_frontend_ioctl_legacy: doesn't know how to handle a DVBv3 call to delivery system 0"[root@cos6 ~]# cd
/usr/bin
[root@cos6 bin]# ./dvbscan/usr/share/dvb/dvb-t/uk-Hannington>/usr/share/dvb/dvb-t/channels.conf
[root@cos6 bin]# dmesg | grep dvb
dvb-usb: found a 'Hauppauge Nova-T MyTV.t' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
dvb-usb: schedule remote query interval to 50 msecs.
dvb-usb: Hauppauge Nova-T MyTV.t successfully initialized and connected.
usbcore: registered new interface driverdvb_usb_dib0700dvb_frontend_ioctl_legacy: doesn't know how to handle a DVBv3 call to delivery system 0
Quoted 8 lines
I have searched but can't locate a fix. Any pointers?
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi,
this patch will likely fix your problem:
http://patchwork.linuxtv.org/patch/9492/
Best regards,
Gianluca
Quoted 34 lines · Gianluca Gennari
Il 15/01/2012 00:41, RazzaList ha scritto:
Quoted 23 lines
I have followed the build instructions for the Hauppauge MyTV.t device here
- http://linuxtv.org/wiki/index.php/Hauppauge_myTV.t and built the drivers as detailed here -
http://linuxtv.org/wiki/index.php/How_to_Obtain,_Build_and_Install_V4L-DVB_Device_Driverson a CentOS 6.2 i386 build.When I use dvbscan, nothing happens. dmesg shows "
dvb_frontend_ioctl_legacy: doesn't know how to handle a DVBv3 call to delivery system 0"[root@cos6 ~]# cd
/usr/bin
[root@cos6 bin]# ./dvbscan/usr/share/dvb/dvb-t/uk-Hannington>/usr/share/dvb/dvb-t/channels.conf
[root@cos6 bin]# dmesg | grep dvb
dvb-usb: found a 'Hauppauge Nova-T MyTV.t' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
dvb-usb: schedule remote query interval to 50 msecs.
dvb-usb: Hauppauge Nova-T MyTV.t successfully initialized and connected.
usbcore: registered new interface driverdvb_usb_dib0700dvb_frontend_ioctl_legacy: doesn't know how to handle a DVBv3 call to delivery system 0Quoted 8 lines
I have searched but can't locate a fix. Any pointers?
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 7 lines
Hi,
this patch will likely fix your problem:http://patchwork.linuxtv.org/patch/9492/
Best regards,
Gianluca
It's very likely the case I'm doing something wrong and I apologise in advance! However some help/guidance would be great...
I have downloaded the sources as described in the basic approach here
- http://linuxtv.org/wiki/index.php/How_to_Obtain,_Build_and_Install_V4L-DVB_Device_Drivers
In the source there is no file called "dvb_frontend.c", so I assume I start the media_build/build script?
If I do, eventually this creates media_build/linux/drivers/media/dvb/dvb-core/dvb_frontend.c
I then apply the patch to media_build/linux/drivers/media/dvb/dvb-core/dvb_frontend.c, and I can see the added elements...
....
static int dvb_frontend_clear_cache(struct dvb_frontend *fe)
{
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
int i;
u32 delsys;
delsys = c->delivery_system;
memset(c, 0, sizeof(struct dtv_frontend_properties));
c->delivery_system = delsys;
c->state = DTV_CLEAR;
dprintk("%s() Clearing cache for delivery system %d\n", __func__,
c->delivery_system);................
After a reboot (as I have not got a clue about unloading modules etc.) I then execute make install but I still get the same error "dvb_frontend_ioctl_legacy: doesn't know how to handle a DVBv3 call to delivery system 0" when I use dvbscan.
Il 15/01/2012 12:35, razza lists ha scritto:
Quoted 72 lines · Gianluca Gennari
Quoted 34 lines
Il 15/01/2012 00:41, RazzaList ha scritto:
Quoted 23 lines
I have followed the build instructions for the Hauppauge MyTV.t device here
- http://linuxtv.org/wiki/index.php/Hauppauge_myTV.t and built the drivers as detailed here -
http://linuxtv.org/wiki/index.php/How_to_Obtain,_Build_and_Install_V4L-DVB_Device_Driverson a CentOS 6.2 i386 build.When I use dvbscan, nothing happens. dmesg shows "
dvb_frontend_ioctl_legacy: doesn't know how to handle a DVBv3 call to delivery system 0"[root@cos6 ~]# cd
/usr/bin
[root@cos6 bin]# ./dvbscan/usr/share/dvb/dvb-t/uk-Hannington>/usr/share/dvb/dvb-t/channels.conf
[root@cos6 bin]# dmesg | grep dvb
dvb-usb: found a 'Hauppauge Nova-T MyTV.t' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
dvb-usb: schedule remote query interval to 50 msecs.
dvb-usb: Hauppauge Nova-T MyTV.t successfully initialized and connected.
usbcore: registered new interface driverdvb_usb_dib0700dvb_frontend_ioctl_legacy: doesn't know how to handle a DVBv3 call to delivery system 0Quoted 8 lines
I have searched but can't locate a fix. Any pointers?
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to [email protected]
More majordomo info at �http://vger.kernel.org/majordomo-info.htmlQuoted 7 lines
Hi,
this patch will likely fix your problem:http://patchwork.linuxtv.org/patch/9492/
Best regards,
GianlucaIt's very likely the case I'm doing something wrong and I apologise in advance! However some help/guidance would be great...
I have downloaded the sources as described in the basic approach here
- http://linuxtv.org/wiki/index.php/How_to_Obtain,_Build_and_Install_V4L-DVB_Device_DriversIn the source there is no file called "
dvb_frontend.c", so I assume I start the media_build/build script?
If I do, eventually this createsmedia_build/linux/drivers/media/dvb/dvb-core/dvb_frontend.cI then apply the patch to
media_build/linux/drivers/media/dvb/dvb-core/dvb_frontend.c, and I can see the added elements...
....
static intdvb_frontend_clear_cache(struct dvb_frontend *fe){ struct dtv_frontend_properties *c = &fe->dtv_property_cache; int i; u32 delsys; delsys = c->delivery_system; memset(c, 0, sizeof(struct dtv_frontend_properties)); c->delivery_system = delsys; c->state = DTV_CLEAR; dprintk("%s() Clearing cache for delivery system %d\n", __func__, c->delivery_system);
Quoted 7 lines
................
After a reboot (as I have not got a clue about unloading modules etc.) I then execute make install but I still get the same error "
dvb_frontend_ioctl_legacy: doesn't know how to handle a DVBv3 call to delivery system 0" when I use dvbscan.
You are almost there.
After you apply the patch, you have to recompile the entire source tree. You can do it launching the "make" command inside the linux/ folder. Then reinstall the drivers giving "make install" from the media_build/ folder, and reboot.
Best regards,
Gianluca
Em 15-01-2012 09:51, Gianluca Gennari escreveu:
Quoted 81 lines
Il 15/01/2012 12:35, razza lists ha scritto:
Quoted 72 lines · Gianluca Gennari
Quoted 34 lines
Il 15/01/2012 00:41, RazzaList ha scritto:
Quoted 23 lines
I have followed the build instructions for the Hauppauge MyTV.t device here
- http://linuxtv.org/wiki/index.php/Hauppauge_myTV.t and built the drivers as detailed here -
http://linuxtv.org/wiki/index.php/How_to_Obtain,_Build_and_Install_V4L-DVB_Device_Driverson a CentOS 6.2 i386 build.When I use dvbscan, nothing happens. dmesg shows "
dvb_frontend_ioctl_legacy: doesn't know how to handle a DVBv3 call to delivery system 0"[root@cos6 ~]# cd
/usr/bin
[root@cos6 bin]# ./dvbscan/usr/share/dvb/dvb-t/uk-Hannington>/usr/share/dvb/dvb-t/channels.conf
[root@cos6 bin]# dmesg | grep dvb
dvb-usb: found a 'Hauppauge Nova-T MyTV.t' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
dvb-usb: schedule remote query interval to 50 msecs.
dvb-usb: Hauppauge Nova-T MyTV.t successfully initialized and connected.
usbcore: registered new interface driverdvb_usb_dib0700dvb_frontend_ioctl_legacy: doesn't know how to handle a DVBv3 call to delivery system 0Quoted 8 lines
I have searched but can't locate a fix. Any pointers?
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to [email protected]
More majordomo info at �http://vger.kernel.org/majordomo-info.htmlQuoted 7 lines
Hi,
this patch will likely fix your problem:http://patchwork.linuxtv.org/patch/9492/
Best regards,
GianlucaIt's very likely the case I'm doing something wrong and I apologise in advance! However some help/guidance would be great...
I have downloaded the sources as described in the basic approach here
- http://linuxtv.org/wiki/index.php/How_to_Obtain,_Build_and_Install_V4L-DVB_Device_DriversIn the source there is no file called "
dvb_frontend.c", so I assume I start the media_build/build script?
If I do, eventually this createsmedia_build/linux/drivers/media/dvb/dvb-core/dvb_frontend.cI then apply the patch to
media_build/linux/drivers/media/dvb/dvb-core/dvb_frontend.c, and I can see the added elements...
....
static intdvb_frontend_clear_cache(struct dvb_frontend *fe){ struct dtv_frontend_properties *c = &fe->dtv_property_cache; int i; u32 delsys; delsys = c->delivery_system; memset(c, 0, sizeof(struct dtv_frontend_properties)); c->delivery_system = delsys; c->state = DTV_CLEAR; dprintk("%s() Clearing cache for delivery system %d\n", __func__, c->delivery_system);Quoted 7 lines
................
After a reboot (as I have not got a clue about unloading modules etc.) I then execute make install but I still get the same error "
dvb_frontend_ioctl_legacy: doesn't know how to handle a DVBv3 call to delivery system 0" when I use dvbscan.
Quoted 5 lines
You are almost there.
After you apply the patch, you have to recompile the entire source tree. You can do it launching the "make" command inside the linux/ folder. Then reinstall the drivers giving "make install" from the media_build/ folder, and reboot.
I've added the fixes for it today. So, tomorrow's tarballs should have this bug fixed.
Quoted 7 lines
Best regards,
Gianluca
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 82 lines · Mauro Carvalho Chehab
Em 15-01-2012 09:51, Gianluca Gennari escreveu:
Quoted 81 lines
Il 15/01/2012 12:35, razza lists ha scritto:
Quoted 79 lines · Gianluca Gennari
Quoted 34 lines
Il 15/01/2012 00:41, RazzaList ha scritto:
Quoted 23 lines
I have followed the build instructions for the Hauppauge MyTV.t device here
- http://linuxtv.org/wiki/index.php/Hauppauge_myTV.t and built the drivers as detailed here -
http://linuxtv.org/wiki/index.php/How_to_Obtain,_Build_and_Install_V4L-DVB_Device_Driverson a CentOS 6.2 i386 build.When I use dvbscan, nothing happens. dmesg shows "
dvb_frontend_ioctl_legacy: doesn't know how to handle a DVBv3 call to delivery system 0"[root@cos6 ~]# cd
/usr/bin
[root@cos6 bin]# ./dvbscan/usr/share/dvb/dvb-t/uk-Hannington>/usr/share/dvb/dvb-t/channels.conf
[root@cos6 bin]# dmesg | grep dvb
dvb-usb: found a 'Hauppauge Nova-T MyTV.t' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
dvb-usb: schedule remote query interval to 50 msecs.
dvb-usb: Hauppauge Nova-T MyTV.t successfully initialized and connected.
usbcore: registered new interface driverdvb_usb_dib0700dvb_frontend_ioctl_legacy: doesn't know how to handle a DVBv3 call to delivery system 0Quoted 8 lines
I have searched but can't locate a fix. Any pointers?
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to [email protected]
More majordomo info at �http://vger.kernel.org/majordomo-info.htmlQuoted 7 lines
Hi,
this patch will likely fix your problem:http://patchwork.linuxtv.org/patch/9492/
Best regards,
GianlucaIt's very likely the case I'm doing something wrong and I apologise in advance! However some help/guidance would be great...
I have downloaded the sources as described in the basic approach here
- http://linuxtv.org/wiki/index.php/How_to_Obtain,_Build_and_Install_V4L-DVB_Device_DriversIn the source there is no file called "
dvb_frontend.c", so I assume I start the media_build/build script?
If I do, eventually this createsmedia_build/linux/drivers/media/dvb/dvb-core/dvb_frontend.cI then apply the patch to
media_build/linux/drivers/media/dvb/dvb-core/dvb_frontend.c, and I can see the added elements...
....
static intdvb_frontend_clear_cache(struct dvb_frontend *fe){
structdtv_frontend_properties*c =&fe->dtv_property_cache; int i;
u32 delsys;delsys =
c->delivery_system;
memset(c, 0, sizeof(struct dtv_frontend_properties));c->delivery_system= delsys;
c->state=DTV_CLEAR;
dprintk("%s() Clearing cache for delivery system %d\n", __func__, c->delivery_system);
................After a reboot (as I have not got a clue about unloading modules etc.) I then execute make install but I still get the same error "
dvb_frontend_ioctl_legacy: doesn't know how to handle a DVBv3 call to delivery system 0" when I use dvbscan.
Quoted 17 lines
Quoted 5 lines
You are almost there.
After you apply the patch, you have to recompile the entire source tree. You can do it launching the "make" command inside the linux/ folder. Then reinstall the drivers giving "make install" from the media_build/ folder, and reboot.I've added the fixes for it today. So, tomorrow's tarballs should have this bug fixed.
Quoted 7 lines
Best regards,
Gianluca
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
I'm glad about that as I am getting nowhere fast. Looks like it's better to rebuild the box in the week and save wasting your time. After patching etc, I did manage to get a little bit further, but when using dvbscan I got an error:
[root@cos6 bin]# dvbscan /usr/share/dvb/dvb-t/uk-Hannington > /home/mythtv/channels.conf
Unable to query frontend status
Dmesg output:
usb 1-3: new high speed USB device using ehci_hcd and address 2 usb 1-3: New USB device found, idVendor=2040, idProduct=7080
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-3: Product: myTV.t
usb 1-3: Manufacturer: Eskape Labs
usb 1-3: SerialNumber: 4030928317
usb 1-3: configuration #1 chosen from 1 choice
WARNING: You are using an experimental version of the media stack.
As the driver is backported to an older kernel, it doesn't offer enough quality for its usage in production.
Use it with care.
Latest git patches (needed if you report a bug to [email protected]):
240ab508aa9fb7a294b0ecb563b19ead000b2463 [media] [PATCH] don't reset the delivery system on DTV_CLEAR 9544e8a64795d75875ff4c680a43aa452a37b260 [media] [BUG] it913x-fe fix typo error making SNR levels unstable c147f61083e3e4a9c2aaecaaed976502defc3b7d [media] cx23885: Query the
CX25840 during enum_input for status
WARNING: You are using an experimental version of the media stack.
As the driver is backported to an older kernel, it doesn't offer enough quality for its usage in production.
Use it with care.
Latest git patches (needed if you report a bug to [email protected]):
240ab508aa9fb7a294b0ecb563b19ead000b2463 [media] [PATCH] don't reset the delivery system on DTV_CLEAR 9544e8a64795d75875ff4c680a43aa452a37b260 [media] [BUG] it913x-fe fix typo error making SNR levels unstable c147f61083e3e4a9c2aaecaaed976502defc3b7d [media] cx23885: Query the
CX25840 during enum_input for status
IR NEC protocol handler initialized
IR RC5(x) protocol handler initialized
IR RC6 protocol handler initialized
IR JVC protocol handler initialized
IR Sony protocol handler initialized
IR SANYO protocol handler initialized
IR MCE Keyboard/mouse protocol handler initialized
dib0700: loaded with support for 24 different device-types
dvb-usb: found a 'Hauppauge Nova-T MyTV.t' in cold state, will try to load a firmware
usb 1-3: firmware: requesting dvb-usb-dib0700-1.20.fwlirc_dev: IR Remote Control driver registered, major 248
IR LIRC bridge handler initialized
dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw'
dib0700: firmware started successfully.
dvb-usb: found a 'Hauppauge Nova-T MyTV.t' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (Hauppauge Nova-T MyTV.t)
DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)...
DiB0070: successfully identified
dvb-usb: Hauppauge Nova-T MyTV.t successfully initialized and connected.
usbcore: registered new interface driver dvb_usb_dib0700
Il 15/01/2012 16:04, razza lists ha scritto:
Quoted 100 lines · Mauro Carvalho Chehab
Quoted 82 lines
Em 15-01-2012 09:51, Gianluca Gennari escreveu:
Quoted 81 lines
Il 15/01/2012 12:35, razza lists ha scritto:
Quoted 79 lines · Gianluca Gennari
Quoted 34 lines
Il 15/01/2012 00:41, RazzaList ha scritto:
Quoted 23 lines
I have followed the build instructions for the Hauppauge MyTV.t device here
- http://linuxtv.org/wiki/index.php/Hauppauge_myTV.t and built the drivers as detailed here -
http://linuxtv.org/wiki/index.php/How_to_Obtain,_Build_and_Install_V4L-DVB_Device_Driverson a CentOS 6.2 i386 build.When I use dvbscan, nothing happens. dmesg shows "
dvb_frontend_ioctl_legacy: doesn't know how to handle a DVBv3 call to delivery system 0"[root@cos6 ~]# cd
/usr/bin
[root@cos6 bin]# ./dvbscan/usr/share/dvb/dvb-t/uk-Hannington>/usr/share/dvb/dvb-t/channels.conf
[root@cos6 bin]# dmesg | grep dvb
dvb-usb: found a 'Hauppauge Nova-T MyTV.t' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
dvb-usb: schedule remote query interval to 50 msecs.
dvb-usb: Hauppauge Nova-T MyTV.t successfully initialized and connected.
usbcore: registered new interface driverdvb_usb_dib0700dvb_frontend_ioctl_legacy: doesn't know how to handle a DVBv3 call to delivery system 0Quoted 8 lines
I have searched but can't locate a fix. Any pointers?
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to [email protected]
More majordomo info at �http://vger.kernel.org/majordomo-info.htmlQuoted 7 lines
Hi,
this patch will likely fix your problem:http://patchwork.linuxtv.org/patch/9492/
Best regards,
GianlucaIt's very likely the case I'm doing something wrong and I apologise in advance! However some help/guidance would be great...
I have downloaded the sources as described in the basic approach here
- http://linuxtv.org/wiki/index.php/How_to_Obtain,_Build_and_Install_V4L-DVB_Device_DriversIn the source there is no file called "
dvb_frontend.c", so I assume I start the media_build/build script?
If I do, eventually this createsmedia_build/linux/drivers/media/dvb/dvb-core/dvb_frontend.cI then apply the patch to
media_build/linux/drivers/media/dvb/dvb-core/dvb_frontend.c, and I can see the added elements...
....
static intdvb_frontend_clear_cache(struct dvb_frontend *fe){ struct dtv_frontend_properties *c = &fe->dtv_property_cache; int i; u32 delsys; delsys = c->delivery_system; memset(c, 0, sizeof(struct dtv_frontend_properties)); c->delivery_system = delsys; c->state = DTV_CLEAR; dprintk("%s() Clearing cache for delivery system %d\n", __func__, c->delivery_system);................
After a reboot (as I have not got a clue about unloading modules etc.) I then execute make install but I still get the same error "
dvb_frontend_ioctl_legacy: doesn't know how to handle a DVBv3 call to delivery system 0" when I use dvbscan.Quoted 17 lines
Quoted 5 lines
You are almost there.
After you apply the patch, you have to recompile the entire source tree. You can do it launching the "make" command inside the linux/ folder. Then reinstall the drivers giving "make install" from the media_build/ folder, and reboot.I've added the fixes for it today. So, tomorrow's tarballs should have this bug fixed.
Quoted 7 lines
Best regards,
Gianluca
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 8 lines
I'm glad about that as I am getting nowhere fast. Looks like it's better to rebuild the box in the week and save wasting your time. After patching etc, I did manage to get a little bit further, but when using dvbscan I got an error:
[root@cos6 bin]# dvbscan
/usr/share/dvb/dvb-t/uk-Hannington>/home/mythtv/channels.conf
Unable to query frontend status
According to the dvbscan wiki page:
http://linuxtv.org/wiki/index.php/Dvbscan
if you get this error you should try other scanning utilities, like scan or w_scan. You can also try a real application, like Kaffeine.
Best regards,
Gianluca
Quoted 54 lines
Dmesg output:
usb 1-3: new high speed USB device usingehci_hcdand address 2 usb 1-3: New USB device found, idVendor=2040, idProduct=7080
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-3: Product: myTV.t
usb 1-3: Manufacturer: Eskape Labs
usb 1-3: SerialNumber: 4030928317
usb 1-3: configuration #1 chosen from 1 choice
WARNING: You are using an experimental version of the media stack.
As the driver is backported to an older kernel, it doesn't offer enough quality for its usage in production.
Use it with care.
Latest git patches (needed if you report a bug to [email protected]):240ab508aa9fb7a294b0ecb563b19ead000b2463 [media] [PATCH] don't reset the delivery system on DTV_CLEAR 9544e8a64795d75875ff4c680a43aa452a37b260 [media] [BUG] it913x-fe fix typo error making SNR levels unstable c147f61083e3e4a9c2aaecaaed976502defc3b7d [media] cx23885: Query theCX25840 during
enum_inputfor status
WARNING: You are using an experimental version of the media stack.
As the driver is backported to an older kernel, it doesn't offer enough quality for its usage in production.
Use it with care.
Latest git patches (needed if you report a bug to [email protected]):240ab508aa9fb7a294b0ecb563b19ead000b2463 [media] [PATCH] don't reset the delivery system on DTV_CLEAR 9544e8a64795d75875ff4c680a43aa452a37b260 [media] [BUG] it913x-fe fix typo error making SNR levels unstable c147f61083e3e4a9c2aaecaaed976502defc3b7d [media] cx23885: Query theCX25840 during
enum_inputfor status
IR NEC protocol handler initialized
IR RC5(x) protocol handler initialized
IR RC6 protocol handler initialized
IR JVC protocol handler initialized
IR Sony protocol handler initialized
IR SANYO protocol handler initialized
IR MCE Keyboard/mouse protocol handler initialized
dib0700: loaded with support for 24 different device-types
dvb-usb: found a 'Hauppauge Nova-T MyTV.t' in cold state, will try to load a firmware
usb 1-3: firmware: requesting dvb-usb-dib0700-1.20.fwlirc_dev: IR Remote Control driver registered, major 248
IR LIRC bridge handler initialized
dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw'
dib0700: firmware started successfully.
dvb-usb: found a 'Hauppauge Nova-T MyTV.t' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (Hauppauge Nova-T MyTV.t)
DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)...
DiB0070: successfully identified
dvb-usb: Hauppauge Nova-T MyTV.t successfully initialized and connected.
usbcore: registered new interface driverdvb_usb_dib0700
Quoted 112 lines · Gianluca Gennari
Il 15/01/2012 16:04, razza lists ha scritto:
Quoted 100 lines · Mauro Carvalho Chehab
Quoted 82 lines
Em 15-01-2012 09:51, Gianluca Gennari escreveu:
Quoted 81 lines
Il 15/01/2012 12:35, razza lists ha scritto:
Quoted 79 lines · Gianluca Gennari
Quoted 34 lines
Il 15/01/2012 00:41, RazzaList ha scritto:
Quoted 23 lines
I have followed the build instructions for the Hauppauge MyTV.t device here
- http://linuxtv.org/wiki/index.php/Hauppauge_myTV.t and built the drivers as detailed here -
http://linuxtv.org/wiki/index.php/How_to_Obtain,_Build_and_Install_V4L-DVB_Device_Driverson a CentOS 6.2 i386 build.When I use dvbscan, nothing happens. dmesg shows "
dvb_frontend_ioctl_legacy: doesn't know how to handle a DVBv3 call to delivery system 0"[root@cos6 ~]# cd
/usr/bin
[root@cos6 bin]# ./dvbscan/usr/share/dvb/dvb-t/uk-Hannington>/usr/share/dvb/dvb-t/channels.conf
[root@cos6 bin]# dmesg | grep dvb
dvb-usb: found a 'Hauppauge Nova-T MyTV.t' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
dvb-usb: schedule remote query interval to 50 msecs.
dvb-usb: Hauppauge Nova-T MyTV.t successfully initialized and connected.
usbcore: registered new interface driverdvb_usb_dib0700dvb_frontend_ioctl_legacy: doesn't know how to handle a DVBv3 call to delivery system 0Quoted 8 lines
I have searched but can't locate a fix. Any pointers?
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to [email protected]
More majordomo info at �http://vger.kernel.org/majordomo-info.htmlQuoted 7 lines
Hi,
this patch will likely fix your problem:http://patchwork.linuxtv.org/patch/9492/
Best regards,
GianlucaIt's very likely the case I'm doing something wrong and I apologise in advance! However some help/guidance would be great...
I have downloaded the sources as described in the basic approach here
- http://linuxtv.org/wiki/index.php/How_to_Obtain,_Build_and_Install_V4L-DVB_Device_DriversIn the source there is no file called "
dvb_frontend.c", so I assume I start the media_build/build script?
If I do, eventually this createsmedia_build/linux/drivers/media/dvb/dvb-core/dvb_frontend.cI then apply the patch to
media_build/linux/drivers/media/dvb/dvb-core/dvb_frontend.c, and I can see the added elements...
....
static intdvb_frontend_clear_cache(struct dvb_frontend *fe){
structdtv_frontend_properties*c =&fe->dtv_property_cache; int i;
u32 delsys;delsys =
c->delivery_system;
memset(c, 0, sizeof(struct dtv_frontend_properties));c->delivery_system= delsys;
c->state=DTV_CLEAR;
dprintk("%s() Clearing cache for delivery system %d\n", __func__, c->delivery_system);
................After a reboot (as I have not got a clue about unloading modules etc.) I then execute make install but I still get the same error "
dvb_frontend_ioctl_legacy: doesn't know how to handle a DVBv3 call to delivery system 0" when I use dvbscan.Quoted 17 lines
Quoted 5 lines
You are almost there.
After you apply the patch, you have to recompile the entire source tree. You can do it launching the "make" command inside the linux/ folder. Then reinstall the drivers giving "make install" from the media_build/ folder, and reboot.I've added the fixes for it today. So, tomorrow's tarballs should have this bug fixed.
Quoted 7 lines
Best regards,
Gianluca
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.htmlQuoted 8 lines
I'm glad about that as I am getting nowhere fast. Looks like it's better to rebuild the box in the week and save wasting your time. After patching etc, I did manage to get a little bit further, but when using dvbscan I got an error:
[root@cos6 bin]# dvbscan
/usr/share/dvb/dvb-t/uk-Hannington>/home/mythtv/channels.conf
Unable to query frontend statusAccording to the dvbscan wiki page:
Quoted 63 lines
http://linuxtv.org/wiki/index.php/Dvbscan
if you get this error you should try other scanning utilities, like scan or
w_scan. You can also try a real application, like Kaffeine.Best regards,
GianlucaQuoted 54 lines
Dmesg output:
usb 1-3: new high speed USB device usingehci_hcdand address 2 usb 1-3: New USB device found, idVendor=2040, idProduct=7080
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-3: Product: myTV.t
usb 1-3: Manufacturer: Eskape Labs
usb 1-3: SerialNumber: 4030928317
usb 1-3: configuration #1 chosen from 1 choice
WARNING: You are using an experimental version of the media stack. As the driver is backported to an older kernel, it doesn't offer enough quality for its usage in production.
Use it with care.
Latest git patches (needed if you report a bug to [email protected]):
240ab508aa9fb7a294b0ecb563b19ead000b2463[media] [PATCH] don't reset the delivery system onDTV_CLEAR9544e8a64795d75875ff4c680a43aa452a37b260[media] [BUG] it913x-fe fix typo error making SNR levels unstablec147f61083e3e4a9c2aaecaaed976502defc3b7d[media] cx23885: Query the CX25840 duringenum_inputfor status
WARNING: You are using an experimental version of the media stack. As the driver is backported to an older kernel, it doesn't offer enough quality for its usage in production.
Use it with care.
Latest git patches (needed if you report a bug to [email protected]):
240ab508aa9fb7a294b0ecb563b19ead000b2463[media] [PATCH] don't reset the delivery system onDTV_CLEAR9544e8a64795d75875ff4c680a43aa452a37b260[media] [BUG] it913x-fe fix typo error making SNR levels unstablec147f61083e3e4a9c2aaecaaed976502defc3b7d[media] cx23885: Query the CX25840 duringenum_inputfor status
IR NEC protocol handler initialized
IR RC5(x) protocol handler initialized
IR RC6 protocol handler initialized
IR JVC protocol handler initialized
IR Sony protocol handler initialized
IR SANYO protocol handler initialized
IR MCE Keyboard/mouse protocol handler initialized
dib0700: loaded with support for 24 different device-types
dvb-usb: found a 'Hauppauge Nova-T MyTV.t' in cold state, will try to load a firmware
usb 1-3: firmware: requesting dvb-usb-dib0700-1.20.fwlirc_dev: IR Remote Control driver registered, major 248
IR LIRC bridge handler initialized
dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw'
dib0700: firmware started successfully.
dvb-usb: found a 'Hauppauge Nova-T MyTV.t' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (Hauppauge Nova-T MyTV.t)
DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)...
DiB0070: successfully identified
dvb-usb: Hauppauge Nova-T MyTV.t successfully initialized and connected.
usbcore: registered new interface driverdvb_usb_dib0700
VLC and MythTV don't like it either. They go through the scanning but do not find any channels.
Quoted 168 lines · razza lists
Quoted 167 lines · Gianluca Gennari
Il 15/01/2012 16:04, razza lists ha scritto:
Quoted 100 lines · Mauro Carvalho Chehab
Quoted 82 lines
Em 15-01-2012 09:51, Gianluca Gennari escreveu:
Quoted 81 lines
Il 15/01/2012 12:35, razza lists ha scritto:
Quoted 79 lines · Gianluca Gennari
Quoted 34 lines
Il 15/01/2012 00:41, RazzaList ha scritto:
Quoted 23 lines
I have followed the build instructions for the Hauppauge MyTV.t device here
- http://linuxtv.org/wiki/index.php/Hauppauge_myTV.t and built the drivers as detailed here -
http://linuxtv.org/wiki/index.php/How_to_Obtain,_Build_and_Install_V4L-DVB_Device_Driverson a CentOS 6.2 i386 build.When I use dvbscan, nothing happens. dmesg shows "
dvb_frontend_ioctl_legacy: doesn't know how to handle a DVBv3 call to delivery system 0"[root@cos6 ~]# cd
/usr/bin
[root@cos6 bin]# ./dvbscan/usr/share/dvb/dvb-t/uk-Hannington>/usr/share/dvb/dvb-t/channels.conf
[root@cos6 bin]# dmesg | grep dvb
dvb-usb: found a 'Hauppauge Nova-T MyTV.t' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
dvb-usb: schedule remote query interval to 50 msecs.
dvb-usb: Hauppauge Nova-T MyTV.t successfully initialized and connected.
usbcore: registered new interface driverdvb_usb_dib0700dvb_frontend_ioctl_legacy: doesn't know how to handle a DVBv3 call to delivery system 0Quoted 8 lines
I have searched but can't locate a fix. Any pointers?
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to [email protected]
More majordomo info at �http://vger.kernel.org/majordomo-info.htmlQuoted 7 lines
Hi,
this patch will likely fix your problem:http://patchwork.linuxtv.org/patch/9492/
Best regards,
GianlucaIt's very likely the case I'm doing something wrong and I apologise in advance! However some help/guidance would be great...
I have downloaded the sources as described in the basic approach here
- http://linuxtv.org/wiki/index.php/How_to_Obtain,_Build_and_Install_V4L-DVB_Device_DriversIn the source there is no file called "
dvb_frontend.c", so I assume I start the media_build/build script?
If I do, eventually this createsmedia_build/linux/drivers/media/dvb/dvb-core/dvb_frontend.cI then apply the patch to
media_build/linux/drivers/media/dvb/dvb-core/dvb_frontend.c, and I can see the added elements...
....
static intdvb_frontend_clear_cache(struct dvb_frontend *fe){ struct dtv_frontend_properties *c = &fe->dtv_property_cache; int i; u32 delsys; delsys = c->delivery_system; memset(c, 0, sizeof(struct dtv_frontend_properties)); c->delivery_system = delsys; c->state = DTV_CLEAR; dprintk("%s() Clearing cache for delivery system %d\n", __func__, c->delivery_system);................
After a reboot (as I have not got a clue about unloading modules etc.) I then execute make install but I still get the same error "
dvb_frontend_ioctl_legacy: doesn't know how to handle a DVBv3 call to delivery system 0" when I use dvbscan.Quoted 17 lines
Quoted 5 lines
You are almost there.
After you apply the patch, you have to recompile the entire source tree. You can do it launching the "make" command inside the linux/ folder. Then reinstall the drivers giving "make install" from the media_build/ folder, and reboot.I've added the fixes for it today. So, tomorrow's tarballs should have this bug fixed.
Quoted 7 lines
Best regards,
Gianluca
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.htmlQuoted 8 lines
I'm glad about that as I am getting nowhere fast. Looks like it's better to rebuild the box in the week and save wasting your time. After patching etc, I did manage to get a little bit further, but when using dvbscan I got an error:
[root@cos6 bin]# dvbscan
/usr/share/dvb/dvb-t/uk-Hannington>/home/mythtv/channels.conf
Unable to query frontend statusAccording to the dvbscan wiki page:
http://linuxtv.org/wiki/index.php/Dvbscan
if you get this error you should try other scanning utilities, like scan or
w_scan. You can also try a real application, like Kaffeine.Best regards,
GianlucaQuoted 47 lines
Dmesg output:
usb 1-3: new high speed USB device usingehci_hcdand address 2 usb 1-3: New USB device found, idVendor=2040, idProduct=7080
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-3: Product: myTV.t
usb 1-3: Manufacturer: Eskape Labs
usb 1-3: SerialNumber: 4030928317
usb 1-3: configuration #1 chosen from 1 choice
WARNING: You are using an experimental version of the media stack.
As the driver is backported to an older kernel, it doesn't offer enough quality for its usage in production.
Use it with care.
Latest git patches (needed if you report a bug to [email protected]):240ab508aa9fb7a294b0ecb563b19ead000b2463 [media] [PATCH] don't reset the delivery system on DTV_CLEAR 9544e8a64795d75875ff4c680a43aa452a37b260 [media] [BUG] it913x-fe fix typo error making SNR levels unstable c147f61083e3e4a9c2aaecaaed976502defc3b7d [media] cx23885: Query theCX25840 during
enum_inputfor status
WARNING: You are using an experimental version of the media stack.
As the driver is backported to an older kernel, it doesn't offer enough quality for its usage in production.
Use it with care.
Latest git patches (needed if you report a bug to [email protected]):240ab508aa9fb7a294b0ecb563b19ead000b2463 [media] [PATCH] don't reset the delivery system on DTV_CLEAR 9544e8a64795d75875ff4c680a43aa452a37b260 [media] [BUG] it913x-fe fix typo error making SNR levels unstable c147f61083e3e4a9c2aaecaaed976502defc3b7d [media] cx23885: Query theCX25840 during
enum_inputfor status
IR NEC protocol handler initialized
IR RC5(x) protocol handler initialized
IR RC6 protocol handler initialized
IR JVC protocol handler initialized
IR Sony protocol handler initialized
IR SANYO protocol handler initialized
IR MCE Keyboard/mouse protocol handler initialized
dib0700: loaded with support for 24 different device-types
dvb-usb: found a 'Hauppauge Nova-T MyTV.t' in cold state, will try to load a firmware
usb 1-3: firmware: requesting dvb-usb-dib0700-1.20.fwlirc_dev: IR Remote Control driver registered, major 248 IR LIRC bridge handler initialized
dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw'
dib0700: firmware started successfully.
dvb-usb: found a 'Hauppauge Nova-T MyTV.t' in warm state.
Quoted 8 lines
Quoted 8 lines
Quoted 7 lines
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (Hauppauge Nova-T MyTV.t)
DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)...
DiB0070: successfully identified
dvb-usb: Hauppauge Nova-T MyTV.t successfully initialized and connected.
usbcore: registered new interface driverdvb_usb_dib0700
I could never get DiBcom 7000PC to work properly, there is something not right with the AGC settings. I needed an attenuator on Mendip UK before the transmitters power increased, now I can't get it work at all.
Legacy applications/utils tested so far with 3.2/next on DVB-T on other adapters.
scan okay use -5 option increases time out helpsw_scan okay use -F option increases time out helps
dvbscan fail Unable to query frontend status
me-tv okay
kaffeine okay
VLC okay
mplayer dvb:// okay
VDR okay
mumudvb okay
zap okay