Why my image isn't boot?
I use the u-boot cvs source,
linux-2.4.19 kernel, arm-linux patch, and xscale patch. arm-linux-gcc 3.0 as complier,lubbock(pxa250) as platform.
arm-linux-objcopy -O binary -R .note -R .comment -S vmlinux linux.bin gzip -9 linux.bin
mkimage -A arm -O linux -T kernel -C gzip -a 0xa0008000 -e 0xa0008000 -n
"Linux Kernel Image" -d linux.bin.gz uImage
then under u-boot:
=>loadb 0xa0008000 (send the uImage)
=>go 0xa0008000
start the application at 0xa0008000
<hang>Could someone help me about this? Thanks a lot.
Hongda Zhao
Quoted 9 lines · In message <00af01c2fe45$e8dab100$fe02a8c0@esd11> you wrote:
I use the u-boot cvs source,
linux-2.4.19 kernel, arm-linux patch, and xscale patch. arm-linux-gcc 3.0 as complier,lubbock(pxa250) as platform.arm-linux-objcopy -O binary -R .note -R .comment -S vmlinux linux.bin gzip -9 linux.bin
mkimage -A arm -O linux -T kernel -C gzip -a0xa0008000-e0xa0008000-n
"Linux Kernel Image" -d linux.bin.gz uImage
then under u-boot:
Quoted 6 lines
=>loadb 0xa0008000 (send the uImage) =>go 0xa0008000 start the application at 0xa0008000 <hang>Could someone help me about this? Thanks a lot.
Type "where" and "bt" at your GDB prompt. Umm... you are using a debugger like the BDI2000, aren't you?
Wolfgang Denk
Signature · 4 lines
Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de Schshschshchsch. -- The Gorn, "Arena", stardate 3046.2