net: mdio-mux: add bus name to bus id
Subsystems (3)
Heiner Kallweit
maintainerPATCH 1/1 net: mdio-mux: add bus name to bus id
In case of DT-configured systems it may be hard to identify the PHY interrupt in the /proc/interrupts output. Therefore add the name to the id to make clearer that it's about a device on a muxed mdio bus. In my case:
Now: mdio_mux-0.e40908ff:08
Before: 0.e40908ff:08
--- drivers/net/mdio/mdio-mux.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/net/mdio/mdio-mux.c +2 -2
@@ -168,8 +168,8 @@ int mdio_mux_init(struct device *dev, cb->mii_bus->priv = cb; cb->mii_bus->name ="mdio_mux" ; -snprintf (cb->mii_bus->id,MII_BUS_ID_SIZE ,"%x.%x" , - pb->parent_id, v); +snprintf (cb->mii_bus->id,MII_BUS_ID_SIZE ,"%s-%x.%x" , + cb->mii_bus->name, pb->parent_id, v); cb->mii_bus->parent = dev; cb->mii_bus->read = mdio_mux_read; cb->mii_bus->write = mdio_mux_write;
Signature · 1 line
2.35.1
Quoted 9 lines · Heiner Kallweit
In case of DT-configured systems it may be hard to identify the PHY interrupt in the
/proc/interruptsoutput. Therefore add the name to the id to make clearer that it's about a device on a muxed mdio bus. In my case:Now: mdio_mux-0.e40908ff:08
Before: 0.e40908ff:08Signed-off-by Heiner Kallweit <[email protected]>
Andrew
This patch was applied to netdev/net-next.git (master) by Paolo Abeni <[email protected]>:
Hello:
This patch was applied to netdev/net-next.git (master) by Paolo Abeni <[email protected]>:
Quoted 9 lines · On Sun, 6 Mar 2022 15:22:34 +0100 you wrote:
In case of DT-configured systems it may be hard to identify the PHY interrupt in the
/proc/interruptsoutput. Therefore add the name to the id to make clearer that it's about a device on a muxed mdio bus. In my case:Now: mdio_mux-0.e40908ff:08
Before: 0.e40908ff:08[...]
Here is the summary with links:
- [net-next] net: mdio-mux: add bus name to bus id
https://git.kernel.org/netdev/net-next/c/1416ea0ddc14
You are awesome, thank you!
Signature · 2 lines
Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/patchwork/pwbot.html