Skip to contentSkip to conversation

EABI toolchains do not free init in busybox

Buildroot Brian Austin 1 participant 1 message May 15, 2007 1 message not in the archive

lore
Share & tools
lore
#1 lore raw
In reply to a message not in the archive

I get nothing.

freeing init.........

I can pass init=busybox and get the busybox help output, and I can make a hello world app say hello world, but it doesnt give me a shell.

I traced it to setting the consoles in busybox init, it seems to die with snprintf.

Quoted 44 lines · Christopher Reder

I had an issue with something similar where I didn't have console defined under dev in my fs. Probably not what you have, but thought I'd pass it along as I had an issue where everything would boot, it would find init, but I didn't get anything on the console.

What are you seeing as output?

-----Original Message-----
From: buildroot-bounces at uclibc.org [mailto:buildroot-bounces at uclibc.org] On Behalf Of Brian Austin
Sent: Tuesday, May 15, 2007 6:16 AM
To: buildroot at uclibc.org
Subject: [Buildroot] EABI toolchains do not free init in busybox

Hello,

I have been building gcc-4.1.1, 4.1.2, 4.2 toolchains for ARM9 EABI with 2.6.20.4 kernel headers from buildroot. I am using daily snapshots of uClibc as well.

I have tried busybox 1.2.0, 1.4.1, and 1.5.0, same results.

the files are built in EABI format as well

they build fine and compile all lf my code and generate a ramdisk.

kernel boots, but init does not let go and bring me to a shell.

Has anyone had any success with building EABI toolchains for ARM9 from buildroot?

I can post my uclibc and buildroot configs if needed.

Thanks,

Brian

_______________________________________________
buildroot mailing list
buildroot at uclibc.org
http://busybox.net/mailman/listinfo/buildroot