Skip to contentSkip to conversation

Firewall Help

DISCUSSION Russ Kreigh 1 participant 1 message Oct 11, 2005

lore
Share & tools
lore
#0 lore raw

Hello -

When I applied the following rules below to my firewall my clients starting having problems browsing webpages. When I did a tcpdump I could see the request go to the DNS server, but never saw a reply.

When I commented out the tcp rules, everything worked fine.

Do you think my limits are too low? I would estimate there are around 200 pcs coming through this.

Also, I am unclear if the rules are applied on a collective basis, or per ip address. I assume it is ALL traffic, not per IP.

$IPTABLES -A INPUT -s X.X.30.0/24 -j ACCEPT # Exclude Management subnet from below rules
$IPTABLES -A INPUT -d X.X.30.0/24 -j ACCEPT
$IPTABLES -A FORWARD -s X.X.30.0/24 -j ACCEPT
$IPTABLES -A FORWARD -d X.X.30.0/24 -j ACCEPT

$IPTABLES -A INPUT -p tcp --syn -m limit --limit 500/s -j REJECT $IPTABLES -A FORWARD -p tcp --syn -m limit --limit 500/s -j REJECT

$IPTABLES -A INPUT -p tcp -m limit --limit 2500/s -j REJECT $IPTABLES -A FORWARD -p tcp -m limit --limit 2500/s -j REJECT

$IPTABLES -A INPUT -p icmp -m limit --limit 200/s -j REJECT $IPTABLES -A FORWARD -p icmp -m limit --limit 200/s -j REJECT

Thanks,

Russ Kreigh
Network Engineer
OnlyInternet.Net Broadband & Wireless
Supernova Technologies

Office: (800) 363-0989
Direct: (260) 827-2486
Fax:    (260) 824-9624

[email protected]
http://www.oibw.net