r8169: issues with RTL8125BG on Raspberry Pi 5 + OpenWrt
Subsystems (2)
Hello all,
I'm having some issues with r8169 on a Raspberry Pi 5 running OpenWrt (kernel v6.6.34) + RTL8125BG (MCUZone MP2.5G).
As you can see in the following logs, it crashes with " transmit queue 0 timed out".
It works perfectly fine for about less than 1 minute and then it crashes. The crash appearance can be sped up by running a speed test or anything that increases the network load.
Maybe it's a HW issue since the official r8125 driver crashes too...
In the following links you can find the logs from the different tests that I carried out with both r8169 and r8125 drivers.
1. OpenWrt + kernel v6.6.34 + r8169 + ASPM Disabled
https://gist.github.com/Noltari/b56128eee8e75b57437a860c7c6b8bd5#file-openwr
t-6-6-r8169-aspm-disabled-txt
2. OpenWrt + kernel v6.6.34 + r8169 + ASPM Enabled
https://gist.github.com/Noltari/b56128eee8e75b57437a860c7c6b8bd5#file-openwr
t-6-6-r8169-aspm-enabled-txt
3. OpenWrt + kernel v6.6.34 + r8125 v9.012.04
https://gist.github.com/Noltari/b56128eee8e75b57437a860c7c6b8bd5#file-openwr
t-6-6-r8125-9-012-04-txt
4. OpenWrt + kernel v6.6.34 + r8125 v9.013.02
https://gist.github.com/Noltari/b56128eee8e75b57437a860c7c6b8bd5#file-openwr
t-6-6-r8125-9-013-02-txt
BTW, the same device (RPi 5) is running perfectly fine with a USB3 ethernet adapter (RTL8165B + r8152 driver).
I've ordered another board based on the RTL8111H so I can check if that works with r8169 or not.
https://www.waveshare.com/pcie-to-gigabit-eth-board-c.htm
Best regards,
Álvaro.
Quoted 12 lines
-----Mensaje original-----
De: [email protected] <[email protected]>
Enviado el: domingo, 23 de junio de 2024 17:01
Para: [email protected]
CC: g, [email protected]; [email protected]
Asunto: r8169: issues with RTL8125BG on Raspberry Pi 5 + OpenWrtHello all,
I'm having some issues with r8169 on a Raspberry Pi 5 running OpenWrt (kernel v6.6.34) + RTL8125BG (MCUZone MP2.5G).
Quoted 8 lines
As you can see in the following logs, it crashes with " transmit queue 0 timed out".
It works perfectly fine for about less than 1 minute and then it crashes. The crash appearance can be sped up by running a speed test or anything that increases the network load.Maybe it's a HW issue since the official r8125 driver crashes too...
Thanks for the report and this relevant information. If the vendor driver fails too, this indeed makes is likely that the root cause is not with the r8169 driver. According to your logs the NIC's even come w/o a pre-programmed MAC address.
Quoted 22 lines
In the following links you can find the logs from the different tests that I carried out with both r8169 and r8125 drivers.
1. OpenWrt + kernel v6.6.34 + r8169 + ASPM Disabled
https://gist.github.com/Noltari/b56128eee8e75b57437a860c7c6b8bd5#file-openwr
t-6-6-r8169-aspm-disabled-txt2. OpenWrt + kernel v6.6.34 + r8169 + ASPM Enabled
https://gist.github.com/Noltari/b56128eee8e75b57437a860c7c6b8bd5#file-openwr
t-6-6-r8169-aspm-enabled-txt3. OpenWrt + kernel v6.6.34 + r8125 v9.012.04
https://gist.github.com/Noltari/b56128eee8e75b57437a860c7c6b8bd5#file-openwr
t-6-6-r8125-9-012-04-txt4. OpenWrt + kernel v6.6.34 + r8125 v9.013.02
https://gist.github.com/Noltari/b56128eee8e75b57437a860c7c6b8bd5#file-openwr
t-6-6-r8125-9-013-02-txtBTW, the same device (RPi 5) is running perfectly fine with a USB3 ethernet adapter (RTL8165B + r8152 driver).
Quoted 8 lines
I've ordered another board based on the RTL8111H so I can check if that works with r8169 or not.
https://www.waveshare.com/pcie-to-gigabit-eth-board-c.htmBest regards,
Álvaro.
Heiner