Skip to contentSkip to conversation

Failed drive in RAID10 using Intel IHC

DISCUSSION Glen Whittenberg 1 participant 1 message Aug 29, 2014 MD RAID

lore
Share & tools
lore
#0 lore raw

What to do... I have a SUPERMICRO SuperServer 5017R-MTF server with 4 Western Digital WDE SATA drives in it. This was setup in the BIOS as a RAID10 Array then OpenSUSE dropped on it. It appears one of the drives is off line now. Here is the good part, like the BIOS RAID thing is not enough. This is a single volume and it also boots off of it. What can I do to repair this? Some info is below. Please let me know what else is needed. Thanks!

# cat /proc/mdstat
Personalities : [raid0] [raid1] [raid10] [raid6] [raid5] [raid4]
md125 : inactive sdc[0](S)
      1105 blocks super external:imsm

md126 : active raid10 sda[2] sdb[1] sdd[0]

      3711641600 blocks super external:/md127/0 64K chunks 2 near-copies
[4/3] [UU_U]
      [=============>.......]  resync = 68.7% (2550717632/3711641856)

finish=157.5min speed=122779K/sec

md127 : inactive sda[2](S) sdd[1](S) sdb[0](S)
9459 blocks super external:imsm

unused devices: <none>

# mdadm --version
mdadm - v3.3 - 3rd September 2013
# mdadm --detail /dev/md126
/dev/md126:
      Container : /dev/md/RAID_0, member 0
     Raid Level : raid10
     Array Size : 3711641600 (3539.70 GiB 3800.72 GB)
  Used Dev Size : 1855820928 (1769.85 GiB 1900.36 GB)
   Raid Devices : 4
  Total Devices : 3

State : active, degraded, resyncing
Active Devices : 3
Working Devices : 3
Failed Devices : 0
Spare Devices : 0

Layout : near=2
Chunk Size : 64K

Resync Status : 69% complete

UUID : dd2ab43b:37dd6ee2:8d78e0a9:ba8c4eec
Number Major Minor RaidDevice State
2 8 0 0 active sync set-A /dev/sda
1 8 16 1 active sync set-B /dev/sdb
4 0 0 4 removed
0 8 48 3 active sync set-B /dev/sdd