Skip to contentSkip to conversation

Problem: Floppy drive[?] hang

DISCUSSION C. D. Thompson-Walsh 2 participants 3 messages Feb 12, 2001 – Feb 14, 2001

lore
Share & tools
lore
#0 lore raw

[This sortof follows the format of the report form in REPORTING-BUGS]
1. I've found a consistent set of circumstances which will hang 2.4.x kernels on my system.

2. If the system is put under load to the point where it swaps heavily (swapping appears to be pre-requisite, based on a little messing about), and then given commands to use the floppy drive (mount, ls -- anything which necessitates reading/writing to the floppy), it will hang with no message (it does not OOPS, or at least it can not to the root console) I've done this several times, with different disks and kernels, with and without X.

3. Hang, floppy, vm, swap

4. 2.4.0, 2.4.1, compiled on egcs gcc 2.91.66

7. My system is a K6 (well behaved to date, w/o bug, afaik) on an Acer mb; ALi M5229 IDE, ALi M15nn bridges... Unfortunately, I can't give the precise mb at the moment...
However, if necessary, I can find out (system was bought as an IBM desktop, therefore the documentation is totally useless and in order to find anything out about hardware I either have to cunningly read the boot logs/ISA probing & interpret or read the green-on-green writing on the mb)... I can't think of any other relevant details, but I would be happy to respond to additional queries for information.

7.2 Relevant /proc/cpuinfo :
processor : 0
vendor_id : AuthenticAMD
cpu family : 5
model : 6
model name : AMD-K6tm w/ multimedia extensions
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr mce cx8 mmx

[the rest of the bug reporting form seems excessive...]

I hope this will be helpful... I'll be reading the mailing list, so if you would like to ask for info, blame my hardware, or insult my style (it's late in my timezone!), feel free.

Best wishes,
C. D. Thompson-Walsh
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/

#1 lore raw
Quoted 10 lines · C. D. Thompson-Walsh

[This sortof follows the format of the report form in REPORTING-BUGS]
1. I've found a consistent set of circumstances which will hang 2.4.x kernels on my system.

2. If the system is put under load to the point where it swaps heavily (swapping appears to be pre-requisite, based on a little messing about), and then given commands to use the floppy drive (mount, ls -- anything which necessitates reading/writing to the floppy), it will hang with no message (it does not OOPS, or at least it can not to the root console) I've done this several times, with different disks and kernels, with and without X.

Hi,

I tried to reproduce this on my PIII-500 VIA chipset box and couldn't. (problem doesn't seem to be generic fwiw)

-Mike

#2 lore raw
Quoted 18 lines · Mike Galbraith
Quoted 11 lines · C. D. Thompson-Walsh

[This sortof follows the format of the report form in REPORTING-BUGS]
1. I've found a consistent set of circumstances which will hang 2.4.x kernels on my system.

2. If the system is put under load to the point where it swaps heavily (swapping appears to be pre-requisite, based on a little messing about), and then given commands to use the floppy drive (mount, ls -- anything which necessitates reading/writing to the floppy), it will hang with no message (it does not OOPS, or at least it can not to the root console) I've done this several times, with different disks and kernels, with and without X.

Hi,

I tried to reproduce this on my PIII-500 VIA chipset box and couldn't. (problem doesn't seem to be generic fwiw)

Quoted 7 lines

-Mike

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Hmm... Well, I haven't succeeded in hanging 2.2.x this way... So the hardware, (while likely flakey) works...

I'll try out another amd system of similar vintage (whose mb make I know! ;-), and see if I can't find anything more helpful/generic... (as well as give speicifc mb info for this system, since it seems to be hw specific) I was going to put 2.4 on it anyways, eventually... In the meantime, well, who uses floppies, anyways? :-)

I really wish I knew enough about the kernel/fd and my c were good enough I could do something more constructive... I feel mildly guilty promising to do my best to expose someone else's bug... :-)

Best wishes,
C. D. Thompson-Walsh