Skip to contentSkip to conversation

Sleep/resume problems, etc.

iPAQ Devin Butterfield 2 participants 2 messages May 9, 2001 1 message not in the archive Memory technology devices (MTD)

lore
Share & tools
lore
#2 lore raw
In reply to David Woodhouse
Quoted 13 lines

The power cycle has reset the flash chip into read mode. The driver still thinks it's in status mode.

The chip driver's resume function needs to make sure the chip is in a known state, rather than assuming it'll still be in the same state it was before the sleep.

I'm sure I'd done this before.

diff -u -r1.72 cfi_cmdset_0001.c

cfi_cmdset_0001.c line 1586

Quoted 6 lines
cfi_cmdset_0001.c +2 -1
@@ -1582,7 +1582,9 @@
 		spin_lock_bh(chip->mutex);
 
 		if (chip->state == FL_PM_SUSPENDED) {
-			chip->state = chip->oldstate;
+			/* We need to force it back to a known state. */
+			cfi_write(map, CMD(0xff), cmd_addr);
						  ^^^^^^^^

What should cmd_addr be here? It's not defined.
--
Regards, Devin.

#1 lore raw
In reply to a message not in the archive
Quoted 7 lines · [email protected] said:

The other more serious problem (which seems to only be related to
resuming from deep sleep) is that the entire OS seems to become unresponsive (processes will not run) after a resume and I'll see these messages on the console:

waiting for chip to be ready timed out in read. WSM status = e0021985 Error reading node from 0x0030fa84: -5

The power cycle has reset the flash chip into read mode. The driver still thinks it's in status mode.

The chip driver's resume function needs to make sure the chip is in a known state, rather than assuming it'll still be in the same state it was before the sleep.

I'm sure I'd done this before.

cfi_cmdset_0001.c +3 -1
diff -u -r1.72 cfi_cmdset_0001.c
@@ -1582,7 +1582,9 @@
 		spin_lock_bh(chip->mutex);
 		
 		if (chip->state == FL_PM_SUSPENDED) {
-			chip->state = chip->oldstate;
+			/* We need to force it back to a known state. */
+			cfi_write(map, CMD(0xff), cmd_addr);
+			chip->state = FL_READY;
 			wake_up(&chip->wq);
 		}
 

--
dwmw2