Skip to contentSkip to conversation

CD-RW ide-scsi problem presists with 2.4.4 (was Re: Problem with 2.4.1/2.4.3 and CD-RW ide-scsi drive)

DISCUSSION Thomas Baecker 1 participant 1 message May 15, 2001

lore
Share & tools
lore
#0 lore raw

Hi there,

in fact I had the same problem with ide-scsi that you mentioned. I also tried the kernel version 2.4.4 but it did not solve the problem. I have a CD-RW drive (/dev/hdd resp. /dev/sr1) that was fully functional even in ide-scsi mode. I also have a CD-ROM drive (/dev/hdb resp. /dev/sr0) that worked perfectly as ide drive but did not work at all in ide-scsi mode. For example,

	dd if=/dev/sr0 of=/dev/null
which should read a CD-ROM in iso9660 format yielded lots of error messages.
So I tried to disable the UDMA mode using the hdparm utility
	hdparm -d 1 -X 34 /dev/hdb

which activates 'multiword DMA mode 2'. Now the CD-ROM drive is fully functional (at least for me...) !

You could even try to disable DMA mode completely typing

	hdparm -d 0 /dev/hdb (e.g.)

May be this works around the bug for now.

I hope, this is somewhat helpul.

Thomas

Quoted 33 lines · Tim Meushaw

Hi there. I just got a new CD-RW drive and am trying to get it working under Linux. I've got the ide-scsi modules all loaded, but have weird errors when trying to mount a disk.

Here are the messages from "dmesg" that I get when the ide-cd and ide-scsi modules are loaded. My DVD-ROM is /dev/hdc, and the CD-RW is /dev/hdd (or /dev/sr0):

-----------------------------------------------------
hdc: ATAPI DVD-ROM drive, 512kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.12
ide-cd: ignoring drive hdd
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: SONY Model: CD-RW CRX160E Rev: 1.0e
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
-----------------------------------------------------

So, it looks like the drive is attached to /dev/sr0 properly. Then, I run "cdrecord -scanbus" to make sure:

-----------------------------------------------------
Cdrecord 1.9 (i686-pc-linux-gnu) Copyright (C) 1995-2000 Jörg Schilling Linux sg driver version: 3.1.17
Using libscg version 'schily-0.1'
scsibus0:

        0,0,0     0) 'SONY    ' 'CD-RW  CRX160E  ' '1.0e' Removable CD-ROM

-----------------------------------------------------

So, it REALLY looks like it's working. However, here's what I get when I try to mount an ordinary data CD:

Quoted 6 lines

-----------------------------------------------------

athens:~# mount -t iso9660 /dev/sr0 /cdrw
mount: block device /dev/sr0 is write-protected, mounting read-only
SCSI cdrom error : host 0 channel 0 id 0 lun 0 return code = 28000000
[valid=0] Info fld=0x0, Current sd0b:00: sense key Hardware Error
Additional sense indicates Logical unit communication CRC error 

(Ultra-DMA/32)

Quoted 16 lines

I/O error: dev 0b:00, sector 64
isofs_read_super: bread failed, dev=0b:00, iso_blknum=16, block=32
mount: wrong fs type, bad option, bad superblock on /dev/sr0,
or too many mounted file systems
-----------------------------------------------------

I've tried this with both kernel 2.4.1 and 2.4.3 and have the exact same error. I've also tried multiple data CDs and have the same messages. The CD-RW is a Sony CRX-160E, plugged in to an Asus A7V motherboard (the PCI bus is described by "lspci" as "VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP]"). I'm not sure what other information I can provide, but I'll be happy to give anything else that might be needed to help fix this problem.

Thanks a lot!
Tim

Signature · 2 lines
Thomas Baecker
email: [email protected]