Skip to contentSkip to conversation

2.4.5-ac1 won't boot with 4GB bigmem option

DISCUSSION Ben Twijnstra 3 participants 6 messages May 27, 2001 – May 28, 2001

lore
Share & tools
lore
#0 lore raw

Hi,

I compiled and booted the 2.4.5-ac1 kernel with the CONFIG_HIGHMEM4G=y option and got an oops in __alloc_pages() (called by alloc_bounce() called by schedule()). Everything works fine if I turn the 4GB mode off.

Machine is a Dell Precision with 2 Xeons and 2GB of RAM.

2.4.5 works fine with the 4GB. Any idea what changed between the two?

Grtz,

Ben

#1 lore raw

Same here, I have a dual 1GHz PIII with 4G, I don't get an oops but an infinite loop of:

Quoted 1 line

mm: critical shortage of bounce buffers.

Indeed this message has been pestering me in all the recent .4-acx kernels when the machine is under heavy FS pressure.

In these kernels I observe a significative (5-10%) performance degradation as soon as the FS cache fills up all the available memory, at this moment "kswapd" starts to take lots of CPU time (10-20%) and I keep getting plenty of the above messages.

I'm running SpecWeb with the X15 webserver, which uses sendfile to send its content, and a very large file set (8-9G, more than twice as much as the physical RAM).

2.4.2-acx and early 2.4.3-acx kernles were much better in this respect and a lot more stable.

- Fabio

Quoted 18 lines · Ben Twijnstra

Hi,

I compiled and booted the 2.4.5-ac1 kernel with the CONFIG_HIGHMEM4G=y option and got an oops in __alloc_pages() (called by alloc_bounce() called by schedule()). Everything works fine if I turn the 4GB mode off.

Machine is a Dell Precision with 2 Xeons and 2GB of RAM.

2.4.5 works fine with the 4GB. Any idea what changed between the two?

Grtz,

Ben
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

#4 lore raw
In reply to Ben Twijnstra
Quoted 6 lines

I compiled and booted the 2.4.5-ac1 kernel with the CONFIG_HIGHMEM4G=y option and got an oops in __alloc_pages() (called by alloc_bounce() called by schedule()). Everything works fine if I turn the 4GB mode off. Machine is a Dell Precision with 2 Xeons and 2GB of RAM.

2.4.5 works fine with the 4GB. Any idea what changed between the two?

The -ac tree has some VM differences for bigmem that really need to be cleaned up and/or removed now the Linus tree is looking solid. I'll probably drop those diffs for -ac2 so that folks are working against one set of VM

#2 lore raw
In reply to Fabio Riccardi
Quoted 7 lines
Quoted 1 line

mm: critical shortage of bounce buffers.

Indeed this message has been pestering me in all the recent .4-acx kernels when the machine is under heavy FS pressure.

In these kernels I observe a significative (5-10%) performance degradation as soon as the FS cache fills up all the available memory, at this moment "kswapd"

Its there to prove we had a problem

Quoted 2 lines

2.4.2-acx and early 2.4.3-acx kernles were much better in this respect and a lot more stable.

Hit any 2.4 kernel pre 2.4.5 vanilla [maybe fixed] and you will break bigmem that way.

#3 lore raw
Quoted 9 lines · Alan Cox
Quoted 7 lines
Quoted 1 line

mm: critical shortage of bounce buffers.

Indeed this message has been pestering me in all the recent .4-acx kernels when the machine is under heavy FS pressure.

In these kernels I observe a significative (5-10%) performance degradation as soon as the FS cache fills up all the available memory, at this moment "kswapd"

Its there to prove we had a problem

granted

Quoted 5 lines
Quoted 2 lines

2.4.2-acx and early 2.4.3-acx kernles were much better in this respect and a lot more stable.

Hit any 2.4 kernel pre 2.4.5 vanilla [maybe fixed] and you will break bigmem that way.

I've been using many kernels (I upgrade every week or so) and as far as I can recollect I started experiencing serious performance problems with the 2.4.4 series. I'm double checking my data right now with older kernels.

- Fabio

#5 lore raw
In reply to Ben Twijnstra

Alan,

2.4.5-ac2 works fine with 4GB on. Thanks! Will try a 2.4.5-aa2 later today, just for fun.

Grtz,

Ben

Quoted 11 lines · Alan Cox
Quoted 6 lines

I compiled and booted the 2.4.5-ac1 kernel with the CONFIG_HIGHMEM4G=y option and got an oops in __alloc_pages() (called by alloc_bounce() called by schedule()). Everything works fine if I turn the 4GB mode off. Machine is a Dell Precision with 2 Xeons and 2GB of RAM.

2.4.5 works fine with the 4GB. Any idea what changed between the two?

The -ac tree has some VM differences for bigmem that really need to be cleaned up and/or removed now the Linus tree is looking solid. I'll probably drop those diffs for -ac2 so that folks are working against one set of VM