qlogicfc driver

DISCUSSION Roland Fehrenbacher 2 participants 2 messages Jul 20, 2001

lore

Share & tools

lore

Roland Fehrenbacher

author

2001-07-20 21:58 UTC #0 lore raw

Quoted 2 lines

While the controller itself sees all the 3 drives
when booting up, under Linux I am only able to see the LUN 0 drives.

Update to my previous post:

The command
echo "scsi add-single-device 0 0 0 1" > /proc/scsi/scsi makes the LUN 1 device appear, so it seems the problem is with the SCSI scanning code.

Roland

jsack

2001-07-20 22:15 UTC #1 lore raw

Quoted 10 lines · Roland Fehrenbacher

Quoted 2 lines
While the controller itself sees all the 3 drives
when booting up, under Linux I am only able to see the LUN 0 drives.
Update to my previous post:
The command
echo "scsi add-single-device 0 0 0 1" > /proc/scsi/scsi makes the LUN 1 device appear, so it seems the problem is with the SCSI scanning code.

is "probe all luns" configured in your kernel?
(.config: CONFIG_SCSI_MULTI_LUN=y)

..jim