Skip to contentSkip to conversation

Kernel 2.4.10 /proc/partitions

DISCUSSION Andre Margis 2 participants 2 messages Sep 27, 2001

lore
Share & tools
lore
#0 lore raw

I'm testing Linux Kernel 2.4.10. I have a Dell 8450 with 8xP-III 700Mhz, 10GBytes RAM, with megaraid PERC 3/DC. I have one logic disk (sda) with 4 partitions (sd1, sd2, sd3, sd4). After boot, my /proc/partitions has this values:

major minor #blocks name

   8     0   17692672 sda
   8     1      32098 sda1
   8     2      32130 sda2
   8     3    4096575 sda3
   8     4   13526730 sda4
   8     0   17692672 sda
   8     1      32098 sda1
   8     2      32130 sda2
   8     3    4096575 sda3
   8     4   13526730 sda4
   8     0   17692672 sda
   8     1      32098 sda1
   8     2      32130 sda2
   8     3    4096575 sda3
   8     4   13526730 sda4
   8     0   17692672 sda
   8     1      32098 sda1
   8     2      32130 sda2
   8     3    4096575 sda3
   8     4   13526730 sda4

the cat command never stop to list.

What's happen?

Thank's

Andre

#1 lore raw

I also have this problem as mentioned before.

The problem cropped up between 2.4.10-pre5 and 2.4.10-pre6, I did some checking. pre5 is fine, pre6 is broken.

Quoted 1 line

From what I saw, my guess is that

genhd.c and the gendisk rewrites might be related.

Unfortunately have no time to look at it until mid-October- any help appreciated.

cheers

Quoted 51 lines · On 27-Sep-2001 Andre Margis wrote:

I'm testing Linux Kernel 2.4.10. I have a Dell 8450 with 8xP-III 700Mhz, 10GBytes RAM, with megaraid PERC 3/DC. I have one logic disk (sda) with 4 partitions (sd1, sd2, sd3, sd4). After boot, my /proc/partitions has this values:

major minor #blocks name

   8     0   17692672 sda
   8     1      32098 sda1
   8     2      32130 sda2
   8     3    4096575 sda3
   8     4   13526730 sda4
   8     0   17692672 sda
   8     1      32098 sda1
   8     2      32130 sda2
   8     3    4096575 sda3
   8     4   13526730 sda4
   8     0   17692672 sda
   8     1      32098 sda1
   8     2      32130 sda2
   8     3    4096575 sda3
   8     4   13526730 sda4
   8     0   17692672 sda
   8     1      32098 sda1
   8     2      32130 sda2
   8     3    4096575 sda3
   8     4   13526730 sda4

the cat command never stop to list.

What's happen?

Thank's

Andre
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/