Skip to contentSkip to conversation

PATCH K2: remove dead code

PATCH Michael Sokolov 2 participants 2 messages Nov 6, 2001

lore
Share & tools
lore
#1 lore raw
In reply to Michael Sokolov

Thanks for this and the cpc710.h changes...pushed.

-Matt

Quoted 15 lines · Michael Sokolov

Hi there,

Whoever has moved the two tiny shim functions from k2_pic.c into k2_setup.c (mporter according to the logs) has apparently forgotten to delete k2_pic.c, which is now dead code. This patch does so.

MS

Delete: arch/ppc/kernel/k2_pic.c
diff -Nru a/arch/ppc/kernel/Makefile b/arch/ppc/kernel/Makefile

arch/ppc/kernel/Makefile line 87

Quoted 10 lines
arch/ppc/kernel/Makefile +2 -2
@@ -80,8 +80,8 @@
 					indirect_pci.o pci_auto.o todc_time.o
 obj-$(CONFIG_GEMINI)		+= gemini_prom.o gemini_pci.o gemini_setup.o \
 					open_pic.o
-obj-$(CONFIG_K2)		+= k2_setup.o k2_pic.o k2_pci.o i8259.o \
-					indirect_pci.o todc_time.o pci_auto.o
+obj-$(CONFIG_K2)		+= k2_setup.o k2_pci.o i8259.o indirect_pci.o \
+					todc_time.o pci_auto.o
 obj-$(CONFIG_LOPEC)		+= lopec_setup.o lopec_pci.o mpc10x_common.o \
 					indirect_pci.o pci_auto.o open_pic.o \
 					i8259.o todc_time.o

--
Matt Porter
[email protected]
This is Linux Country. On a quiet night, you can hear Windows reboot.

** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/

#0 lore raw

Hi there,

Whoever has moved the two tiny shim functions from k2_pic.c into k2_setup.c (mporter according to the logs) has apparently forgotten to delete k2_pic.c, which is now dead code. This patch does so.

MS

Delete: arch/ppc/kernel/k2_pic.c

arch/ppc/kernel/Makefile +2 -2
diff -Nru a/arch/ppc/kernel/Makefile b/arch/ppc/kernel/Makefile
@@ -80,8 +80,8 @@
 					indirect_pci.o pci_auto.o todc_time.o
 obj-$(CONFIG_GEMINI)		+= gemini_prom.o gemini_pci.o gemini_setup.o \
 					open_pic.o
-obj-$(CONFIG_K2)		+= k2_setup.o k2_pic.o k2_pci.o i8259.o \
-					indirect_pci.o todc_time.o pci_auto.o
+obj-$(CONFIG_K2)		+= k2_setup.o k2_pci.o i8259.o indirect_pci.o \
+					todc_time.o pci_auto.o
 obj-$(CONFIG_LOPEC)		+= lopec_setup.o lopec_pci.o mpc10x_common.o \
 					indirect_pci.o pci_auto.o open_pic.o \
 					i8259.o todc_time.o

** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/