x bit for dirs: misfeature?
Everytime I do 'chmod -R a+rX dir' and wonder are there any executables which I don't want to become world executable, I think "Whatta hell with this x bit meaning 'can browse' for dirs?! Who was that clever guy who invented that? Grrrr"
Isn't r sufficient? Can we deprecate x for dirs? I.e. make it a mirror of r: you set r, you see x set, you clear r, you see x cleared, set/clear x = nop?
Benefits:
chmod -R go-x dir (ensure there is no executables)
chmod -R a+r dir (make tree world readable)
mount -t vfat -o umask=644 /dev/xxx dir
(I don't want all files to be flagged as executables there)
These commands will do what I want without (sometimes ugly) tricks. For mount, I can't even see how to do it with current implementation.
What standards will be broken?
Any real loss of functionality apart from compat issues? --
vda
Quoted 15 lines · vda
Everytime I do 'chmod -R a+rX dir' and wonder are there any executables which I don't want to become world executable, I think "Whatta hell with this x bit meaning 'can browse' for dirs?! Who was that clever guy who invented that? Grrrr"
Isn't r sufficient? Can we deprecate x for dirs? I.e. make it a mirror of r: you set r, you see x set, you clear r, you see x cleared, set/clear x = nop?
Benefits:
chmod -R go-x dir (ensure there is no executables)
chmod -R a+r dir (make tree world readable)
mount -t vfat -o umask=644/dev/xxxdir
(I don't want all files to be flagged as executables there)
Quoted 5 lines
These commands will do what I want without (sometimes ugly) tricks. For mount, I can't even see how to do it with current implementation.
What standards will be broken?
Any real loss of functionality apart from compat issues?
The R and X bits on directories have different meanings. Watch:
$ mkdir test $ echo content > test/file $ chmod a-r test $ ls test ls: test: permission denied $ cat test/file content $ chmod a=r test $ ls test ls: test/file: Permission denied
In short, the X bit allows you to access the contents of the directory, while R allows you to LIST those contents. There are valid uses for X only directories (i.e. users are not allowed to list the contents, only to access them directly by name). R-only directories make little sense, as you can see from the transcript above :)
James.
Quoted 8 lines · vda
Everytime I do 'chmod -R a+rX dir' and wonder are there any executables which I don't want to become world executable, I think "Whatta hell with this x bit meaning 'can browse' for dirs?! Who was that clever guy who invented that? Grrrr"
Isn't r sufficient? Can we deprecate x for dirs? I.e. make it a mirror of r: you set r, you see x set, you clear r, you see x cleared, set/clear x = nop?
See UNIX FAQ. Ability to read != ability to lookup.
Trivial example: you have a directory with a bunch of subdirectories. You want owners of subdirectories to see them. You don't want them to _know_ about other subdirectories.
--
BUGS
There's no perm option for the naughty bits.
BSD chmod(1)
Quoted 16 lines · James A Sutherland
Quoted 15 lines · vda
Everytime I do 'chmod -R a+rX dir' and wonder are there any executables which I don't want to become world executable, I think "Whatta hell with this x bit meaning 'can browse' for dirs?! Who was that clever guy who invented that? Grrrr"
Isn't r sufficient? Can we deprecate x for dirs? I.e. make it a mirror of r: you set r, you see x set, you clear r, you see x cleared, set/clear x = nop?
Benefits:
chmod -R go-x dir (ensure there is no executables)
chmod -R a+r dir (make tree world readable)
mount -t vfat -o umask=644/dev/xxxdir
(I don't want all files to be flagged as executables there)
Quoted 7 lines
Quoted 5 lines
These commands will do what I want without (sometimes ugly) tricks. For mount, I can't even see how to do it with current implementation.
What standards will be broken?
Any real loss of functionality apart from compat issues?The R and X bits on directories have different meanings. Watch:
I know. I'd like to hear anybody who have a directory with r!=x on purpose (and quite curious on that purpose). UNIX gugus, anybody?
Quoted 10 lines
$ mkdir test $ echo content > test/file $ chmod a-r test $ ls test ls: test: permission denied $ cat test/file content $ chmod a=r test $ ls test ls: test/file: Permission denied
Hmm... I do actually tested this and last command succeeds (shows dir contents). You probably meant cat test/file, not ls...
Quoted 5 lines
In short, the X bit allows you to access the contents of the directory, while R allows you to LIST those contents. There are valid uses for X only directories (i.e. users are not allowed to list the contents, only to access them directly by name). R-only directories make little sense, as you can see from the transcript above :)
Quoted 10 lines · Alexander Viro
Quoted 8 lines · vda
Everytime I do 'chmod -R a+rX dir' and wonder are there any executables which I don't want to become world executable, I think "Whatta hell with this x bit meaning 'can browse' for dirs?! Who was that clever guy who invented that? Grrrr"
Isn't r sufficient? Can we deprecate x for dirs? I.e. make it a mirror of r: you set r, you see x set, you clear r, you see x cleared, set/clear x = nop?
Quoted 5 lines
See UNIX FAQ. Ability to read != ability to lookup.
Trivial example: you have a directory with a bunch of subdirectories. You want owners of subdirectories to see them. You don't want them to _know_ about other subdirectories.
Security through obscurity, that is.
Do you have even a single dir on your boxes with r!=x? --
vda
Quoted 2 lines · vda
I know. I'd like to hear anybody who have a directory with r!=x on purpose (and quite curious on that purpose). UNIX gugus, anybody?
ftp://.../incoming
Tim.
*/
Quoted 13 lines · vda
Quoted 12 lines · Alexander Viro
Quoted 8 lines · vda
Everytime I do 'chmod -R a+rX dir' and wonder are there any executables which I don't want to become world executable, I think "Whatta hell with this x bit meaning 'can browse' for dirs?! Who was that clever guy who invented that? Grrrr"
Isn't r sufficient? Can we deprecate x for dirs? I.e. make it a mirror of r: you set r, you see x set, you clear r, you see x cleared, set/clear x = nop?
See UNIX FAQ. Ability to read != ability to lookup.
Quoted 7 lines
Quoted 3 lines
Trivial example: you have a directory with a bunch of subdirectories. You want owners of subdirectories to see them. You don't want them to _know_ about other subdirectories.
Security through obscurity, that is.
Do you have even a single dir on your boxes with r!=x?
I've seen this a lot with html directories for web servers.
Quoted 5 lines · vda
Quoted 3 lines
Trivial example: you have a directory with a bunch of subdirectories. You want owners of subdirectories to see them. You don't want them to _know_ about other subdirectories.
Security through obscurity, that is.
Huh? By the same logics /etc/shadow is security through obscurity - after all, you can try all possible passwords one by one. Ability to use key != ability to see valid keys.
Quoted 1 line
Do you have even a single dir on your boxes with r!=x?
Yes.
Please, go to rtfm.mit.edu and find the UNIX FAQ there. Then read the relevant parts.
Quoted 9 lines · On 19-Nov-2001 vda wrote:
Everytime I do 'chmod -R a+rX dir' and wonder are there any executables which I don't want to become world executable, I think "Whatta hell with this x bit meaning 'can browse' for dirs?! Who was that clever guy who invented that? Grrrr"
Isn't r sufficient? Can we deprecate x for dirs? I.e. make it a mirror of r: you set r, you see x set, you clear r, you see x cleared, set/clear x = nop?
Quoted 5 lines
Benefits:
chmod -R go-x dir (ensure there is no executables) chmod -R a+r dir (make tree world readable)
mount -t vfat -o umask=644/dev/xxxdir
(I don't want all files to be flagged as executables there)
This is all userspace:
find . -type d -exec chmod a+rx {} \;
make an alias for it and stop considering changing one of the earliest unix standards. I'm sure if you really want this policy you can write your own chmod executable.
me
Signature · 1 line
me
Quoted 3 lines · On 19-Nov-2001 vda wrote:
Security through obscurity, that is.
Do you have even a single dir on your boxes with r!=x?
IIRC, postfix depends on it.
Signature · 1 line
me
Quoted 10 lines · Tim Waugh
Quoted 2 lines · vda
I know. I'd like to hear anybody who have a directory with r!=x on purpose (and quite curious on that purpose). UNIX gugus, anybody?
ftp://.../incoming
Tim.
*/
It doesn't make any difference if it's useful. It is a de-facto standard. Therefore, it must exist. It's just like all the stuff in the C runtime library you never use like bcopy()!
If everybody in the world wanted to get rid of that dumb bit, you still couldn't do it. It needs to exists for no other reason than it has existed.
Cheers,
Dick Johnson
Penguin : Linux version 2.4.1 on an i686 machine (799.53 BogoMips).
I was going to compile a list of innovations that could be attributed to Microsoft. Once I realized that Ctrl-Alt-Del was handled in the BIOS, I found that there aren't any.
Quoted 13 lines · vda
Quoted 12 lines · Alexander Viro
Quoted 8 lines · vda
Everytime I do 'chmod -R a+rX dir' and wonder are there any executables which I don't want to become world executable, I think "Whatta hell with this x bit meaning 'can browse' for dirs?! Who was that clever guy who invented that? Grrrr"
Isn't r sufficient? Can we deprecate x for dirs? I.e. make it a mirror of r: you set r, you see x set, you clear r, you see x cleared, set/clear x = nop?
See UNIX FAQ. Ability to read != ability to lookup.
Quoted 8 lines
Quoted 3 lines
Trivial example: you have a directory with a bunch of subdirectories. You want owners of subdirectories to see them. You don't want them to _know_ about other subdirectories.
Security through obscurity, that is.
Do you have even a single dir on your boxes with r!=x? --
/home/user/public_html
Apache needs to be able to access public_html but you really don't want other users browsing your home dir.
This is in fact a VERY COMMON SETUP and several distros even set things up that way by default.
On top of that your proposed change would make linux diffrent from every other Unix like OS making life harder for those of us who admin/code for several diffrent OS.
Gerhard
--
Gerhard Mack
<>< As a computer I find your faith in technology amusing.
Quoted 16 lines · Mathijs Mohlmann
Quoted 9 lines · On 19-Nov-2001 vda wrote:
Everytime I do 'chmod -R a+rX dir' and wonder are there any executables which I don't want to become world executable, I think "Whatta hell with this x bit meaning 'can browse' for dirs?! Who was that clever guy who invented that? Grrrr"
Isn't r sufficient? Can we deprecate x for dirs? I.e. make it a mirror of r: you set r, you see x set, you clear r, you see x cleared, set/clear x = nop?
Quoted 5 lines
Benefits:
chmod -R go-x dir (ensure there is no executables) chmod -R a+r dir (make tree world readable)
mount -t vfat -o umask=644/dev/xxxdir
(I don't want all files to be flagged as executables there)
Quoted 6 lines
This is all userspace:
find . -type d -exec chmod a+rx {} \;make an alias for it and stop considering changing one of the earliest unix standards. I'm sure if you really want this policy you can write your own chmod executable.
Well, I think you're right. I still think that overloading one bit to have two meanings (exec for file, browse for dir) was a bad idea, but it looks unsurmountable now to change that. Amount (and tone) of replies proves this.
chmod/mount/.../... workarounds is the best we can do now.
chmod -R [ugoa]+R dir - set r for files, rx for dirs chmod -R [ugoa]-R dir - remove r for files, rx for dirs
^
mount -t vfat -o umask=644,udmask=755 /dev/hdc1 /mnt/hdc1
^^^^^^^^^^--
vda
Quoted 13 lines · vda
Quoted 10 lines · James A Sutherland
$ mkdir test $ echo content > test/file $ chmod a-r test $ ls test ls: test: permission denied $ cat test/file content $ chmod a=r test $ ls test ls: test/file: Permission denied
Quoted 2 lines
Hmm... I do actually tested this and last command succeeds (shows dir contents). You probably meant cat test/file, not ls...
Nope, ls.
[james@dax p2i]$ ls test
ls: test/file: Permission denied
[james@dax p2i]$ ls -l test
ls: test/file: Permission denied
total 0
(There is something incredibly stupid about the first one: ls is unable to, er, read the name of the named file?!)
Anyway, as Al Viro has pointed out, R!=X. It's been like that for a very long time, it's deliberate, not a misfeature, and it's staying like that for the foreseeable future.
James.
vda <[email protected]> said:
[...]
Quoted 1 line
Do you have even a single dir on your boxes with r!=x?
Directories /dev, /lib, /bin, /etc under FTP home are --x. I'd do the same with cgi-bin et al for WWW...
Some FTP sites (f.ex. ftp.sendmail.org) have limited distribution prereleases under an unreadable directory (--x).
-wx is used for anonymous uploading under FTP
It certainly has its uses. If you wanted to _really_ lock down a box, you'd start by doing the same --x game for some critical directories.
Signature · 4 lines
Dr. Horst H. von Brand User #22616 counter.li.org Departamento de Informatica Fono: +56 32 654431 Universidad Tecnica Federico Santa Maria +56 32 654239 Casilla 110-V, Valparaiso, Chile Fax: +56 32 797513
Quoted 16 lines · you
Quoted 12 lines · vda
Quoted 10 lines · James A Sutherland
$ mkdir test $ echo content > test/file $ chmod a-r test $ ls test ls: test: permission denied $ cat test/file content $ chmod a=r test $ ls test ls: test/file: Permission deniedQuoted 2 lines
Hmm... I do actually tested this and last command succeeds (shows dir contents). You probably meant cat test/file, not ls...
Quoted 7 lines
Nope, ls.
[james@dax p2i]$ ls test
ls: test/file: Permission denied
[james@dax p2i]$ ls -l test
ls: test/file: Permission denied
total 0
Looks like we have different ls :-). Mine lists 'r only' dir with no problem.
Quoted 3 lines
Anyway, as Al Viro has pointed out, R!=X. It's been like that for a very long time, it's deliberate, not a misfeature, and it's staying like that for the foreseeable future.
Yes, I see... All I can do is to add workarounds (ok,ok, 'support') to chmod and friends:
chmod -R a+R dir - sets r for files and rx for dirs
--
vda
vda <[email protected]> said:
[...]
Quoted 8 lines
Quoted 5 lines
[james@dax p2i]$ ls test
ls: test/file: Permission denied
[james@dax p2i]$ ls -l test
ls: test/file: Permission denied
total 0Looks like we have different ls :-). Mine lists 'r only' dir with no problem.
Probably some alias. "/bin/ls test" should work, "/bin/ls -l test" won't.
Quoted 8 lines
Quoted 3 lines
Anyway, as Al Viro has pointed out, R!=X. It's been like that for a very long time, it's deliberate, not a misfeature, and it's staying like that for the foreseeable future.
Yes, I see... All I can do is to add workarounds (ok,ok, 'support') to chmod and friends:
chmod -R a+R dir - sets r for files and rx for dirs
X sets x for dirs, leaves files alone.
Signature · 4 lines
Dr. Horst H. von Brand User #22616 counter.li.org Departamento de Informatica Fono: +56 32 654431 Universidad Tecnica Federico Santa Maria +56 32 654239 Casilla 110-V, Valparaiso, Chile Fax: +56 32 797513
vda <[email protected]>
Quoted 21 lines · James A Sutherland
Quoted 19 lines · vda
Quoted 18 lines
Everytime I do 'chmod -R a+rX dir' and wonder are there any executables which I don't want to become world executable, I think "Whatta hell with this x bit meaning 'can browse' for dirs?! Who was that clever guy who invented that? Grrrr"
Isn't r sufficient? Can we deprecate x for dirs? I.e. make it a mirror of r: you set r, you see x set, you clear r, you see x cleared, set/clear x = nop?
Benefits:
chmod -R go-x dir (ensure there is no executables)
chmod -R a+r dir (make tree world readable)
mount -t vfat -o umask=644/dev/xxxdir
(I don't want all files to be flagged as executables there)These commands will do what I want without (sometimes ugly) tricks. For mount, I can't even see how to do it with current implementation.
Quoted 7 lines
Quoted 4 lines
Quoted 2 lines
What standards will be broken?
Any real loss of functionality apart from compat issues?The R and X bits on directories have different meanings. Watch:
I know. I'd like to hear anybody who have a directory with r!=x on purpose (and quite curious on that purpose). UNIX gugus, anybody?
It's used to hide files in anonymous FTP for for one. It prevents you from retrieving files that you don't know the name of. Yes, a brute force attempt to open MAY work to find the unknown file, it will take a long time, and you are most likely to be detected. The anonymous FTP use is usually in an incoming directory - the files are put there from remote individuals, and are hidden (unless someone is a good guesser/or a poor name chosen) until the administrator examines/moves them.
Quoted 12 lines
Quoted 11 lines
$ mkdir test $ echo content > test/file $ chmod a-r test $ ls test ls: test: permission denied $ cat test/file content $ chmod a=r test $ ls test ls: test/file: Permission denied
Quoted 8 lines
Hmm... I do actually tested this and last command succeeds (shows dir contents). You probably meant cat test/file, not ls...
Quoted 5 lines
In short, the X bit allows you to access the contents of the directory, while R allows you to LIST those contents. There are valid uses for X only directories (i.e. users are not allowed to list the contents, only to access them directly by name). R-only directories make little sense, as you can see from the transcript above :)
It's there for consistancy/simplisity. Mode bits for directories are treated the same as they are for any other type of file.
-------------------------------------------------------------------------
Jesse I Pollard, II
Email: [email protected]
Any opinions expressed are solely my own.
Quoted 6 lines
Quoted 5 lines
I know. I'd like to hear anybody who have a directory with r!=x on purpose (and quite curious on that purpose). UNIX gugus, anybody?
Quoted 8 lines
It's used to hide files in anonymous FTP for for one. It prevents you from retrieving files that you don't know the name of. Yes, a brute force attempt to open MAY work to find the unknown file, it will take a long time, and you are most likely to be detected. The anonymous FTP use is usually in an incoming directory - the files are put there from remote individuals, and are hidden (unless someone is a good guesser/or a poor name chosen) until the administrator examines/moves them.
I use it for more than just ftp. I chmod 710 ~ and have ~ in the web/email groups. It stops prying eyes unless they know what the filename is.
David
Quoted 10 lines · Horst von Brand
Quoted 8 lines
Quoted 3 lines
Anyway, as Al Viro has pointed out, R!=X. It's been like that for a very long time, it's deliberate, not a misfeature, and it's staying like that for the foreseeable future.
Yes, I see... All I can do is to add workarounds (ok,ok, 'support') to chmod and friends:
chmod -R a+R dir - sets r for files and rx for dirs
X sets x for dirs, leaves files alone.
Hmm... yes this is one of such workarounds already implemented. But it is not very good for my example:
X sets x for dirs *and* for files with x set for any of u,g,o.
# chmod -R a+rX dir
will make any executables (even root only) world-executable.
That's why I'd like to add new flag to chmod: R.
--
vda
Quoted 10 lines · Horst von Brand
vda <[email protected]> said:
[...]
Quoted 6 lines
Quoted 5 lines
[james@dax p2i]$ ls test
ls: test/file: Permission denied
[james@dax p2i]$ ls -l test
ls: test/file: Permission denied
total 0
Quoted 4 lines
Quoted 2 lines
Looks like we have different ls :-). Mine lists 'r only' dir with no problem.
Probably some alias. "
/bin/lstest" should work, "/bin/ls-l test" won't.
Correct: my default ls is trying to stat the files to pick a pretty color for them...
Quoted 10 lines
Quoted 8 lines
Quoted 3 lines
Anyway, as Al Viro has pointed out, R!=X. It's been like that for a very long time, it's deliberate, not a misfeature, and it's staying like that for the foreseeable future.
Yes, I see... All I can do is to add workarounds (ok,ok, 'support') to chmod and friends:
chmod -R a+R dir - sets r for files and rx for dirs
X sets x for dirs, leaves files alone.
Which sounds like exactly the behaviour the original poster wanted, AFAICS?
James.
Quoted 2 lines · vda
I know. I'd like to hear anybody who have a directory with r!=x on purpose (and quite curious on that purpose). UNIX gugus, anybody?
When you have a web server running with user homepages in $HOME/www or similar, users need to have x set for the web server to serve their pages, but some users may not want all other users to see what files they have. Those people will have --x permission for other on their $HOME.
Signature · 3 lines
Ciao, Pascal -<[ [email protected], netmail 2:241/215.72, home http://cobol.cjb.net/) ]>-
Quoted 8 lines · James A Sutherland
Quoted 6 lines
Quoted 4 lines
Yes, I see... All I can do is to add workarounds (ok,ok, 'support') to chmod and friends:
chmod -R a+R dir - sets r for files and rx for dirs
X sets x for dirs, leaves files alone.
Which sounds like exactly the behaviour the original poster wanted, AFAICS?
Yes, that sounds like the behaviour I want. But X flag does not do that. Sorry.
James, I don't like flame wars. Lets ask ourself: does this thread have any useful results? Unfortunately, not many.
Patches for chmod source would be better. Perhaps I should do that...
Let's refrain from "you're fool... go read manpage" type discussions. Not productive.
--
vda
Quoted 1 line · vda
On Monday 19 November 2001 16:44, Horst von Brand wrote:
[...]
Quoted 9 lines
Quoted 1 line
X sets x for dirs, leaves files alone.
Hmm... yes this is one of such workarounds already implemented. But it is not very good for my example:
X sets x for dirs *and* for files with x set for any of u,g,o.# chmod -R a+rX dirwill make any executables (even root only) world-executable.
That's what you are asking for...
Signature · 4 lines
Dr. Horst H. von Brand User #22616 counter.li.org Departamento de Informatica Fono: +56 32 654431 Universidad Tecnica Federico Santa Maria +56 32 654239 Casilla 110-V, Valparaiso, Chile Fax: +56 32 797513
Quoted 2 lines · vda
I know. I'd like to hear anybody who have a directory with r!=x on purpose (and quite curious on that purpose). UNIX gugus, anybody?
Absolutely -
It is quite common to have dirs with perms 711 -
This allows arbitrary users to copy specific files from such a directory, but does not allow them to cd into that directory or to browse it.
Losing that distinction would be crippling.
cu
jjs
Quoted 6 lines · vda
Quoted 5 lines · James A Sutherland
Quoted 5 lines
Quoted 4 lines
Yes, I see... All I can do is to add workarounds (ok,ok, 'support') to chmod and friends:
chmod -R a+R dir - sets r for files and rx for dirs
Quoted 7 lines
Quoted 4 lines
Quoted 1 line
X sets x for dirs, leaves files alone.
Which sounds like exactly the behaviour the original poster wanted, AFAICS?
Yes, that sounds like the behaviour I want. But X flag does not do that. Sorry.
Oh? I just checked, and X *does* set the x bit on directories only, leaving files unaffected. What's wrong with that? Does it not do this on your system? Or do you want some other behaviour?
Quoted 3 lines
James, I don't like flame wars. Lets ask ourself: does this thread have any useful results? Unfortunately, not many.
Patches for chmod source would be better. Perhaps I should do that...
Patch it to do what? The current behaviour seems to me to be what you want...
Quoted 2 lines
Let's refrain from "you're fool... go read manpage" type discussions. Not productive.
Agreed - if the question were covered in a manpage, I doubt there would be a thread here on LKML about it :)
James.
[email protected] (James A Sutherland) wrote on 19.11.01 in <[email protected]>:
Quoted 8 lines
[james@dax p2i]$ ls test
ls: test/file: Permission denied
[james@dax p2i]$ ls -l test
ls: test/file: Permission denied
total 0(There is something incredibly stupid about the first one: ls is unable to, er, read the name of the named file?!)
Try 'ls --color=none'. Then go read 'info ls'.
MfG Kai
Quoted 3 lines · vda
Patches for chmod source would be better. Perhaps I should do that... Let's refrain from "you're fool... go read manpage" type discussions. Not productive.
Calling you a fool would certainly be stupid, however you are arguing about a feature that Unix filesystems have had since the beginning of time and that every sysadmin uses quite frequently (as described in several posts) so you're not going to get much support, not on LKML at least. ;-)
Patching chmod to add a new option would save some typing once in a while, but if you find yourself doing such chmod'ing often the very obvious solution (which was already proposed) is
find -type d -exec chmod +x \{\} \;
eventually wrapped in a script, alias or whatever. That's what Unices are good for: you can easily build new utilities by combining existing ones, no need to patch anything.
Some might agree that assigning different purposes to the 'x' bit for files and directories might be confusing, but there's a fix for that too:
just think "eXplore" instead of "eXecute" when you look at directories.
Now one could start arguing about the setgid bit too, and that's more dangerous than the execute/explore bit, but again, it always worked that way and it ain't gonna change anytime soon.
Signature · 6 lines
Ciao,
Flavio Stanchina
Trento - Italy
"The best defense against logic is ignorance."
http://spazioweb.inwind.it/fstanchina/Quoted 6 lines · vda
Quoted 4 lines · Alexander Viro
Quoted 2 lines · vda
[...]
Quoted 9 lines
Quoted 6 lines
See UNIX FAQ. Ability to read != ability to lookup.
Trivial example: you have a directory with a bunch of subdirectories. You want owners of subdirectories to see them. You don't want them to _know_ about other subdirectories.
Security through obscurity, that is.
Security through obscurity is about hiding protection measures taken not about hiding sensible data... Hiding sensible data is the main protection measures' purpose :-)
One single example :
Would you want to publish the exhaustive list of locations were your credit card number may be stored (even though it *should* be perfectly secure) or keep it hiden from public eyes ?
This is mainly OT on linux-kernel now. Feel free to mail me directly for future exchanges.
Quoted 6 lines · vda
I think "Whatta hell with this x bit meaning 'can browse' for dirs?! Who was that clever guy who invented that? Grrrr"
Isn't r sufficient? Can we deprecate x for dirs? I.e. make it a mirror of r: you set r, you see x set, you clear r, you see x cleared, set/clear x = nop?
That won't fly, but maybe NFSv4 permissions will. Then at least you could specify "search" or "traverse" permission, neither of which will affect regular files.
Quoted 11 lines · Horst von Brand
Quoted 1 line · vda
On Monday 19 November 2001 16:44, Horst von Brand wrote:
[...]
Quoted 6 lines
Quoted 1 line
X sets x for dirs, leaves files alone.
Hmm... yes this is one of such workarounds already implemented. But it is not very good for my example:
X sets x for dirs *and* for files with x set for any of u,g,o.
Quoted 5 lines
Quoted 3 lines
# chmod -R a+rX dirwill make any executables (even root only) world-executable.
That's what you are asking for...
?!
I'm asking for ability to make a tree _world-readable_ (and browsable), i.e. a+r on files and a+rx on dirs. There is currently no chmod flag which will do that. --
vda
Quoted 12 lines · James A Sutherland
Quoted 11 lines · vda
Quoted 9 lines · James A Sutherland
Quoted 6 lines
Quoted 4 lines
Yes, I see... All I can do is to add workarounds (ok,ok, 'support') to chmod and friends:
chmod -R a+R dir - sets r for files and rx for dirs
X sets x for dirs, leaves files alone.
Which sounds like exactly the behaviour the original poster wanted, AFAICS?
Quoted 6 lines
Quoted 2 lines
Yes, that sounds like the behaviour I want. But X flag does not do that. Sorry.
Oh? I just checked, and X *does* set the x bit on directories only, leaving files unaffected. What's wrong with that? Does it not do this on your system? Or do you want some other behaviour?
I just checked it too (not olny read the manpage but conducted an experiment). If a file has any of three x bits set, chmod a+X will set all three x bits, making it world-executable.
That is not what I want. I want to make whole tree world-readable (and browsable), i.e. a+r on files and a+rx on dirs. There is no chmod flag which will do that.
[I'd like to take this silliness off the lkml but [email protected]
rejects my direct emails:
----- Transcript of session follows -----
... while talking to navy.csi.cam.ac.uk.:
Quoted 1 line
Quoted 1 line
Quoted 1 line
RCPT To:<[email protected]>
<<< 550 mail from 195.66.192.167 rejected: administrative prohibition (host is blacklisted)
550 5.1.1 <[email protected]>... User unknown ]
--
vda
Quoted 3 lines · vda
I'm asking for ability to make a tree _world-readable_ (and browsable), i.e. a+r on files and a+rx on dirs. There is currently no chmod flag which will do that.
So what? The following two commands do exactly that:
find . -type d -exec chmod a+rx "{}" \;
find . -type f -exec chmod a+r "{}" \;
Just stick them in a shell script and call the script chmod-world-readable and stop complaining...
You would obviously want to change the "." to be $1 so it is the 1st argument to the script...
It will be a bit slow and can be optimized endlessly but it will do the trick and you probably won't be running it that often so speed is not an issue... And if it is then grab the chmod sources and add the wanted functionality with a new swich and be done with it.
This is WAY Off Topic for Linux kernel!
Best regards,
Anton
Signature · 5 lines
"I've not lost my mind. It's backed up on tape somewhere." - Unknown -- Anton Altaparmakov <aia21 at cam.ac.uk> (replace at with @) Linux NTFS Maintainer / WWW: http://linux-ntfs.sf.net/ ICQ: 8561279 / WWW: http://www-stu.christs.cam.ac.uk/~aia21/
Quoted 7 lines · Anton Altaparmakov
So what? The following two commands do exactly that:
find . -type d -exec chmod a+rx "{}" \;
find . -type f -exec chmod a+r "{}" \;Just stick them in a shell script and call the script chmod-world-readable and stop complaining...
Just don't do that if that subtree contains a directory writable to somebody else. There is a nasty attack here.
Think what happens if root does that for /tmp/foo and some luser has write permissions on /tmp/foo/bar. There is a window between execve() on chmod(1) and call of chmod(2) and during that window luser can replace /tmp/foo/bar/baz to symlink to /etc and leave root doing chmod("/tmp/foo/bar/baz/shadow", 0744);
Not that chmod(1) was any better at that... It should've been keeping all chain between the root of subtree and parent of file we currently handling opened and do open()/fstat()/fchdir() to go down and fchdir() to go up. Then all calls of chmod(2) would be for files in current directory, which prevents symlink attacks.
Moral: think _very_ hard when you write any tree-walking code that will ever be used on a tree writable to somebody else.
Quoted 11 lines · Alexander Viro
Quoted 7 lines · Anton Altaparmakov
So what? The following two commands do exactly that:
find . -type d -exec chmod a+rx "{}" \;
find . -type f -exec chmod a+r "{}" \;Just stick them in a shell script and call the script chmod-world-readable and stop complaining...
Just don't do that if that subtree contains a directory writable to somebody else. There is a nasty attack here.
Ok. But I assume the application for this is something like /usr/share to which noone would have write privileges to (I would hope). I doubt anyone would want to run it on /home... and if they do they most likely don't care about security too much anyway... (-;
Quoted 5 lines
Think what happens if root does that for
/tmp/fooand some luser has write permissions on/tmp/foo/bar. There is a window betweenexecve()on chmod(1) and call of chmod(2) and during that window luser can replace/tmp/foo/bar/bazto symlink to /etc and leave root doingchmod("/tmp/foo/bar/baz/shadow", 0744);
Quoted 8 lines
Not that chmod(1) was any better at that... It should've been keeping all chain between the root of subtree and parent of file we currently handling opened and do open()/fstat()/fchdir() to go down and
fchdir()to go up. Then all calls of chmod(2) would be for files in current directory, which prevents symlink attacks.Moral: think _very_ hard when you write any tree-walking code that will ever be used on a tree writable to somebody else.
Point taken. I will keep it in mind when implementing ACLs (and ACL inheritance in particular) in NTFS. That will involve walking back to the volume's root to establish the inherited rights... which might perhaps lend itself to simillar abuse.
Cheers,
Anton
Signature · 5 lines
"I've not lost my mind. It's backed up on tape somewhere." - Unknown -- Anton Altaparmakov <aia21 at cam.ac.uk> (replace at with @) Linux NTFS Maintainer / WWW: http://linux-ntfs.sf.net/ ICQ: 8561279 / WWW: http://www-stu.christs.cam.ac.uk/~aia21/
Quoted 2 lines · Anton Altaparmakov
find . -type d -exec chmod a+rx "{}" \;
find . -type f -exec chmod a+r "{}" \;
That is a bit inefficient though. It results in one fork/exec pair for each file and each directory.
A better solution is to use find | xargs
find /path/to/dir -type d -print0 | xargs -0 chmod a+rx find /path/to/dir -type f -print0 | xargs -0 chmod a+r
That way, xargs bunches up the arguments into as many arguments as chmod can handle, and calls it fewer times.
The -print0 and -0 are GNU extensions to handle spaces in names.
mrc
Signature · 3 lines
Mike Castle [email protected] www.netcom.com/~dalgoda/ We are all of us living in the shadow of Manhattan. -- Watchmen fatal ("You are in a maze of twisty compiler features, all different"); -- gcc
Quoted 7 lines · Mike Castle
find /path/to/dir -type d -print0 | xargs -0 chmod a+rx find /path/to/dir -type f -print0 | xargs -0 chmod a+r
That way, xargs bunches up the arguments into as many arguments as chmod can handle, and calls it fewer times.
The -print0 and -0 are GNU extensions to handle spaces in names.
That's even worse than original. You've got a very wide race here - think what happens if luser does
cd /path/to/dir/something/writable/to/luser
mkdir bar
mkdir baz
for i in seq 1 500; do
mkdir bar/$i
touch bar/$i/shadow
ln -sf /etc baz/$i
done
before you start, then waits for first chmod a+r and does
mv bar quux; mv baz bar
leaving you with very interesting results. It's much wider window than in the original.