UDMA problem with Maxtor 7200rpm disk
Quoted 4 lines
When I try to enable DMA with hdparm -d1
/dev/hda:
Quoted 13 lines
ide_dmaproc: chipset supportedide_dma_timeoutfunc only: 14
hda: irq timeout: status=0x58 { DriveReady SeekComplete DataRequest }
hda: timeout waiting for DMAide_dmaproc: chipset supportedide_dma_timeoutfunc only: 14
hda: irq timeout: status=0x58 { DriveReady SeekComplete DataRequest }
hda: timeout waiting for DMAide_dmaproc: chipset supportedide_dma_timeoutfunc only: 14
hda: irq timeout: status=0x58 { DriveReady SeekComplete DataRequest }
hda: timeout waiting for DMAide_dmaproc: chipset supportedide_dma_timeoutfunc only: 14
hda: irq timeout: status=0x58 { DriveReady SeekComplete DataRequest }
hda: DMA disabled
ide0: reset: success
I got this when I got my 40G 5200 maxtor. I've got an old award bios & PII with 440bx chipset.
The solution was to turn off udma in bios my 2.2 kernel and w98 could then use mdma.
I noticed that when I tested with a 2.4.9 it could use udma again - even though it remains off (for W98 & 2.2) in bios.
Andy.