Skip to contentSkip to conversation

Problems with Kernel 2.4.10 on SMP

DISCUSSION Mark Cuss 1 participant 1 message Oct 3, 2001

lore
Share & tools
lore

Mark Cuss

author
#0 lore raw
Quoted 8 lines

Hello,

I have witnessed the same problems on a Dual Processor Box running Kernel 2.4.9 (a Dell Poweredge 1400). I too couldn't find anything suspicous in the log file, but did see the "Locking Max Tag Count" message in the log that was mentioned below. I was forced to do a hard reset on the machine. Since the machine is our development server, having the machine running

well

Quoted 1 line

is obviously desirable (I'm sure everyone feels this way :) I was

planning

Quoted 1 line

on trying 2.4.10 to see if it was any different, but it looks like the

same

Quoted 10 lines

problems exists. If anyone has any hints, please let me know.

Configuration:
Dell Poweredge 1400 Server
Dual PIII Coppermine's at 1 GHz
768 Megs RAM
Adaptec 29160 SCSI Controller Card (onboard controller disabled)

If anyone wants more info from the logs or /proc, pls let me know

Quoted 12 lines

Mark

----- Original Message -----
From: "Christian Schroeder" <[email protected]>
To: <[email protected]>
Sent: Wednesday, October 03, 2001 8:56 AM
Subject: Problems with Kernel 2.4.10 on SMP

Quoted 3 lines

Hi,

since I've been experisnsing large problems with my linux box crashing

and

Quoted 1 line
Quoted 1 line

crashing again, I want to give you this bug report, maybe someone else

has

Quoted 1 line
Quoted 1 line

the same problem. I used the bug report format in explained in the

kernel

Quoted 7 lines
Quoted 7 lines

sources.

Best Regards,
Christian Schroeder

[1.]
The system seams to hang for a while, sometimes recovers and sometimes

not

Quoted 3 lines
Quoted 3 lines

[2.]
I've been using version 2.4.4 from SuSE and 2.4.9/2.4.10 from

kernel.org.

Quoted 5 lines
Quoted 5 lines

2.4.4 runs with no problems on my 2-way machine.
2.4.9 had some hangs which normally recovered after about 15 seconds. 2.4.10 crashed the machine completely. I had to a reset.

Regarding 2.4.9 I allways had the impression that the problem came up

when

Quoted 6 lines
Quoted 1 line

using very large applications like StarOffice. After using the software

for a

Quoted 1 line

moment, it hang and I could see the following line in the syslog

afterwards:

Quoted 2 lines

"Sep 25 21:33:50 tepui kernel: __alloc_pages: 0-order allocation

failed."

Quoted 6 lines
Quoted 4 lines

This problem disappeard after I switch to 2.4.10.

Regarding 2.4.10 I haven't had the chance to get an output, since as I

said,

Quoted 1 line

the machine hangs completely. What I can say is, that normaly just

before

Quoted 2 lines

the

Quoted 1 line

crash, right after e.g. the desktop manager didn't react anymore, the

LED

Quoted 5 lines

of

Quoted 1 line

my SCSI controller was signaling great activity on the drives. Then the

LED

Quoted 2 lines

turn off and the system didn't move a bit.

Quoted 10 lines
Quoted 2 lines

I checked by SCSI hardware setup, but nothing that made my nervous. Especially I now using 2.4.4 and it works without any problem. No crash,

no

Quoted 3 lines

halting.

What I also had the impression was, that always near to the last crash,

the

Quoted 3 lines

logfiles contained the sequence:

"Oct 2 18:16:22 tepui kernel: (scsi0:A:0:0): Locking max tag count at

64"

Quoted 2 lines
Quoted 2 lines

This was not always the case, but I browsed my logfile and found at

least

Quoted 2 lines

4

Quoted 1 line

insidents at which this message showed up close to the next syslog

restart

Quoted 7 lines
Quoted 7 lines

message.

[3.]
Hmpf... SCSI?

[4.]
Linux version 2.4.10 (root@tepui) (gcc version 2.95.3 20010315 (SuSE))

#1

Quoted 31 lines

SMP

Quoted 30 lines

Tue Oct 2 19:14:23 CEST 2001

[5.]
No Ooops in the syslog.

[6.]
Sorry, no script.

[7.1]
Linux tepui 2.4.10 #1 SMP Tue Oct 2 19:14:23 CEST 2001 i686 unknown

Gnu C 2.95.3
Gnu make 3.79.1
binutils 2.10.91.0.4
util-linux 2.11b
mount 2.11b
modutils 2.4.5
e2fsprogs 1.19
reiserfsprogs 3.x.0j
pcmcia-cs 3.1.25
isdn4k-utils 3.1pre1a
Linux C Library x 1 root root 1343073 May 11 16:50c
/lib/libc.so.6
Dynamic linker (ldd) 2.2.2
Procps 2.0.7
Net-tools 1.60
Kbd 1.04
Sh-utils 2.0
Modules Loaded snd-pcm-oss snd-pcm-plugin snd-mixer-oss NVdriver
parport_pc lp parport wacom evdev snd-seq-midi snd-seq-midi-event

snd-seq

Quoted 1 line
Quoted 1 line

snd-card-ens1370 snd-ens1370 snd-pcm snd-timer snd-rawmidi

snd-seq-device

Quoted 13 lines
Quoted 13 lines

snd-ak4531-codec snd-mixer snd soundcore mousedev hid input uhci usbcore 8139too ipchains

[7.2]
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 7
model name : Pentium III (Katmai)
stepping : 3
cpu MHz : 501.148
cache size : 512 KB
fdiv_bug : no

Quoted 8 lines
Quoted 8 lines

hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge

mca

Quoted 13 lines
Quoted 13 lines

cmov
pat pse36 mmx fxsr sse
bogomips : 999.42

processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 7
model name : Pentium III (Katmai)
stepping : 3
cpu MHz : 501.148
cache size : 512 KB
fdiv_bug : no

Quoted 8 lines
Quoted 8 lines

hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge

mca

Quoted 4 lines
Quoted 4 lines

cmov
pat pse36 mmx fxsr sse
bogomips : 999.42

Quoted 16 lines
Quoted 16 lines

[7.3]

snd-pcm-oss            18816   1 (autoclean)
snd-pcm-plugin         14256   0 (autoclean) [snd-pcm-oss]
snd-mixer-oss           5280   0 (autoclean) [snd-pcm-oss]
NVdriver              723872  14 (autoclean)
parport_pc             19600   1 (autoclean)
lp                      5440   0 (autoclean)
parport                26240   1 (autoclean) [parport_pc lp]
wacom                   4016   0 (unused)
evdev                   4192   1
snd-seq-midi            3376   0 (unused)
snd-seq-midi-event      3296   0 [snd-seq-midi]
snd-seq                44800   0 [snd-seq-midi snd-seq-midi-event]
snd-card-ens1370        1952   1
snd-ens1370             8464   0 [snd-card-ens1370]
snd-pcm                33152   0 [snd-pcm-oss snd-pcm-plugin

snd-ens1370]

Quoted 7 lines
Quoted 5 lines
snd-timer               9968   0 [snd-seq snd-pcm]
snd-rawmidi            11040   0 [snd-seq-midi snd-ens1370]
snd-seq-device          4032   0 [snd-seq-midi snd-seq snd-rawmidi]
snd-ak4531-codec       15552   0 [snd-ens1370]
snd-mixer              28768   0 [snd-mixer-oss snd-ens1370

snd-ak4531-codec]

Quoted 1 line

snd 35184 1 [snd-pcm-oss snd-pcm-plugin

snd-mixer-oss

Quoted 160 lines
Quoted 1 line

snd-seq-midi snd-seq-midi-event snd-seq snd-card-ens1370 snd-ens1370

snd-pcm

Quoted 90 lines

snd-timer snd-rawmidi snd-seq-device snd-ak4531-codec snd-mixer]

soundcore               3856   5 [snd]
mousedev                3904   0 (unused)
hid                    12576   0 (unused)
input                   3456   0 [wacom evdev mousedev hid]
uhci                   23808   0 (unused)
usbcore                49152   1 [wacom hid uhci]
8139too                12608   1 (autoclean)
ipchains               32080   0

[7.4.1]
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
02f8-02ff : serial(auto)
0378-037a : parport0
037b-037f : parport0
03c0-03df : vga+
03f8-03ff : serial(auto)
0778-077a : parport0
0cf8-0cff : PCI conf1
b400-b43f : Ensoniq ES1370 [AudioPCI]
b400-b43f : Ensoniq AudioPCI
b800-b8ff : Realtek Semiconductor Co., Ltd. RTL-8139
b800-b8ff : 8139too
d000-d0ff : Adaptec AHA-2940U2/W / 7890 d400-d41f : Intel Corporation 82371AB PIIX4 USB
d400-d41f : usb-uhci
d800-d80f : Intel Corporation 82371AB PIIX4 IDE e400-e43f : Intel Corporation 82371AB PIIX4 ACPI e800-e81f : Intel Corporation 82371AB PIIX4 ACPI

[7.4.2]
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
02f8-02ff : serial(auto)
0378-037a : parport0
037b-037f : parport0
03c0-03df : vga+
03f8-03ff : serial(auto)
0778-077a : parport0
0cf8-0cff : PCI conf1
b400-b43f : Ensoniq ES1370 [AudioPCI]
b400-b43f : Ensoniq AudioPCI
b800-b8ff : Realtek Semiconductor Co., Ltd. RTL-8139
b800-b8ff : 8139too
d000-d0ff : Adaptec AHA-2940U2/W / 7890
d400-d41f : Intel Corporation 82371AB PIIX4 USB
d400-d41f : usb-uhci
d800-d80f : Intel Corporation 82371AB PIIX4 IDE
e400-e43f : Intel Corporation 82371AB PIIX4 ACPI
e800-e81f : Intel Corporation 82371AB PIIX4 ACPI tepui:/usr/src/linux-2.4.10/scripts # cat /proc/iomem 00000000-0009f7ff : System RAM
0009f800-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000c8000-000cd3ff : Extension ROM
000f0000-000fffff : System ROM
00100000-23ffcfff : System RAM
00100000-00219cfd : Kernel code
00219cfe-0026feff : Kernel data
23ffd000-23ffefff : ACPI Tables
23fff000-23ffffff : ACPI Non-volatile Storage e0000000-e00000ff : Realtek Semiconductor Co., Ltd. RTL-8139
e0000000-e00000ff : 8139too
e0800000-e0800fff : Adaptec AHA-2940U2/W / 7890
e0800000-e0800fff : aic7xxx
e1000000-e2dfffff : PCI Bus #01
e1000000-e1ffffff : nVidia Corporation Riva TnT 128 [NV04]
e2f00000-e3ffffff : PCI Bus #01
e3000000-e3ffffff : nVidia Corporation Riva TnT 128 [NV04]
e4000000-e7ffffff : Intel Corporation 440BX/ZX - 82443BX/ZX Host bridge fec00000-fec00fff : reserved
fee00000-fee00fff : reserved
ffff0000-ffffffff : reserved

Quoted 2 lines

[7.5]
00:00.0 Host bridge: Intel Corporation 440BX/ZX - 82443BX/ZX Host bridge

(rev

Quoted 2 lines

02)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-

ParErr-

Quoted 10 lines

Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-

        Latency: 64
        Region 0: Memory at e4000000 (32-bit, prefetchable) [size=64M]
        Capabilities: [a0] AGP version 1.0
                Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2
                Command: RQ=0 SBA- AGP+ 64bit- FW- Rate=x2

00:01.0 PCI bridge: Intel Corporation 440BX/ZX - 82443BX/ZX AGP bridge

(rev

Quoted 2 lines

02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-

ParErr-

Quoted 10 lines

Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

        Latency: 64
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
        I/O behind bridge: 0000e000-0000dfff
        Memory behind bridge: e1000000-e2dfffff
        Prefetchable memory behind bridge: e2f00000-e3ffffff
        BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B+
Quoted 2 lines

00:04.0 ISA bridge: Intel Corporation 82371AB PIIX4 ISA (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-

ParErr-

Quoted 6 lines

Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0

00:04.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01)

(prog-if

Quoted 2 lines

80 [Master])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-

ParErr-

Quoted 6 lines

Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

        Region 4: I/O ports at d800 [disabled] [size=16]

00:04.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01)

(prog-if

Quoted 2 lines

00 [UHCI])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-

ParErr-

Quoted 9 lines

Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

        Latency: 64
        Interrupt: pin D routed to IRQ 15
        Region 4: I/O ports at d400 [size=32]

00:04.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 02)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-

ParErr-

Quoted 5 lines

Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin ? routed to IRQ 9

Quoted 12 lines
Quoted 3 lines

00:06.0 SCSI storage controller: Adaptec AHA-2940U2/W / 7890
Subsystem: Adaptec 2940U2W SCSI Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-

ParErr-

Quoted 8 lines

Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

        Latency: 64 (9750ns min, 6250ns max)
        Interrupt: pin A routed to IRQ 15
        BIST result: 00
        Region 0: I/O ports at d000 [disabled] [size=256]
        Region 1: Memory at e0800000 (64-bit, non-prefetchable)

[size=4K]

Quoted 7 lines
Quoted 7 lines

Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139

(rev

Quoted 11 lines

10)

Quoted 2 lines

Subsystem: Realtek Semiconductor Co., Ltd. RT8139
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-

ParErr-

Quoted 7 lines

Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

        Latency: 64 (8000ns min, 16000ns max)
        Interrupt: pin A routed to IRQ 10
        Region 0: I/O ports at b800 [size=256]
        Region 1: Memory at e0000000 (32-bit, non-prefetchable)

[size=256]

Quoted 5 lines
Quoted 5 lines

Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

Quoted 13 lines
Quoted 3 lines

00:0c.0 Multimedia audio controller: Ensoniq ES1370 [AudioPCI] (rev 01)
Subsystem: Unknown device 4942:4c4c
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-

ParErr-

Quoted 9 lines

Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort-
<TAbort+
<MAbort+ >SERR- <PERR-

        Latency: 64 (3000ns min, 32000ns max)
        Interrupt: pin A routed to IRQ 11
        Region 0: I/O ports at b400 [size=64]

01:00.0 VGA compatible controller: nVidia Corporation Riva TnT 128

[NV04]

Quoted 9 lines
Quoted 2 lines

(rev 04) (prog-if 00 [VGA])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+

ParErr-

Quoted 6 lines

Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

        Latency: 248 (1250ns min, 250ns max)
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at e1000000 (32-bit, non-prefetchable)

[size=16M]

Quoted 29 lines
Quoted 29 lines

Region 1: Memory at e3000000 (32-bit, prefetchable) [size=16M] Expansion ROM at e2ff0000 [disabled] [size=64K]
Capabilities: [60] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 1.0
Status: RQ=15 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=15 SBA- AGP+ 64bit- FW- Rate=x2

[7.6]
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: IBM Model: DDRS-34560D Rev: DC1B
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 01 Lun: 00
Vendor: QUANTUM Model: ATLAS_V_18_WLS Rev: 0230
Type: Direct-Access ANSI SCSI revision: 03
Host: scsi0 Channel: 00 Id: 03 Lun: 00
Vendor: IBM Model: DNES-309170W Rev: SA30
Type: Direct-Access ANSI SCSI revision: 03
Host: scsi0 Channel: 00 Id: 04 Lun: 00
Vendor: PIONEER Model: DVD-ROM DVD-303 Rev: 1.09
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 06 Lun: 00
Vendor: PLEXTOR Model: CD-R PX-W1210S Rev: 1.01
Type: CD-ROM ANSI SCSI revision: 02

Quoted 2 lines
Quoted 2 lines

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel"

in

Quoted 5 lines
Quoted 4 lines

the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/