Traffic shaping on WAN(serial) device
Hi,
In our product i am using the High Speed Serial driver as the WAN interface. I've implemented the HSS as a serial driver and i am running PPP to connect to the internet. I have both Voice data + FTP data going thro the PPP session. Is it possible for me to use the Traffic shaper(wonder shaper) in my case/ Do i need to make the HSS driver to appear as a network device inorder to run the traffic shaper
Would appreciate if you can give some pointers to start off.
Thanks,
Vanitha R
[This e-mail is confidential and may be priviledged. If you are not the intended recipient, please kindly notify us immediately and delete the message from your system; please do not copy or use it for any purpose, nor disclose its contents to any other person. Thank you.]
---ST Electronics Group---
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Quoted 7 lines · Vanitha Ramaswami
Hi,
In our product i am using the High Speed Serial driver as the WAN interface. I've implemented the HSS as a serial driver and i am running PPP to connect to the internet. I have both Voice data + FTP data going thro the PPP session. Is it possible for me to use the Traffic shaper(wonder shaper) in my case/ Do i need to make the HSS driver to appear as a network device inorder to run the traffic shaper
If you have ppp0 you should be able to shape on that OK.
Andy.
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc