Skip to contentSkip to conversation

Ease of hardware configuration

DISCUSSION Josh Hansen 4 participants 4 messages Oct 29, 2001 – Oct 30, 2001

lore
Share & tools
lore
#0 lore raw

Hello,
Perhaps I'm beating a dead horse with this, but my belief is that the feature of greatest benefit to "Joe User" would be simplified hardware installation/configuration. A user coming from Windows who is used to being able to plug in a scanner, a mouse, a video card, whatever and having the OS tell him what it is and automatically set up drivers for him will have real trouble coming to Linux and having to compile a new kernel or new kernel module for a new piece of hardware.
I am not familiar with the innards of the Linux Kernel, but here is my
"vision" of what could be done to change this. The kernel already is able to detect what hardware is attached to the system's different buses generally speaking, so the next step is for it to identify which hardware already has drivers installed for it (built into the kernel or loaded modules). If no drivers are installed, a kernel message to the effect of "New Hardware Detected" could be issued. That is all the kernel has to do. The next steps are handled in userspace software.
Some sort of daemon or cronjob mechanism can then monitor kernel messages
until it finds the "New Hardware Detected" message. Then, a generic configuration utility is launched along with an appropriate frontend (simple, ncurses, GTK+, KDE, Motif, Tcl/Tk, whatever...) to allow the user to configure the device.
Now here comes the radical part (ok, so all of this is somewhat radical): the
configuration utility connects to a server such as linuxdevicedrivers.org or some other slick domain name and downloads the appropriate kernel module binaries for the hardware based on kernel version number and architecture (example: nVidia GeForce module for kernel 2.4.13 on i386, or USB Scanner module for kernel 2.4.4 on PowerPC). Once the module is obtained, it is loaded into the kernel (with explicit IO/IRQ parameters for older hardware if necessary).
Once the module is loaded, the utility quits.
The configuration utility could also allow for loading of modules from floppy
disk or any other filesystem, or from another internet server.
A working name for this utility and kernel message system could be "Linux
Kernel Device Configurator".
I expect that there will be many technical or other objections to such a
system. I also expect to get ripped apart by at least a few hackers out there. However, that's great! I want input. I think this or a similar mechanism could really increase the ease of use for the "average user" and his nephew's godmother's granddaughter's roommate's dog, etc., etc.
Thank you!
- Josh Hansen

#1 lore raw
Quoted 9 lines · Josh Hansen

Now here comes the radical part (ok, so all of this is somewhat radical): the
configuration utility connects to a server such as linuxdevicedrivers.org or some other slick domain name and downloads the appropriate kernel module binaries for the hardware based on kernel version number and architecture (example: nVidia GeForce module for kernel 2.4.13 on i386, or USB Scanner module for kernel 2.4.4 on PowerPC). Once the module is obtained, it is loaded into the kernel (with explicit IO/IRQ parameters for older hardware if necessary).
Once the module is loaded, the utility quits.

Please check out the linux-hotplug package:
http://linux-hotplug.sf.net/

It does most of what you are talking about right now. And if it's missing anything that you want, feel free to contribute :)

thanks,

greg k-h

#2 lore raw
In reply to Josh Hansen
Quoted 2 lines · Josh Hansen

A working name for this utility and kernel message system could be "Linux
Kernel Device Configurator".

Or, on redhat, you could call it "kudzu". (Type "man kudzu".) I first noticed it in the boot sequence during... 6.2? Might have been there earlier...

Now true hotplug is a seperate issue. Kudzu runs at boot time (or when you type it in from the command line) and detects network cards and mice and stuff. You can't hotplug PCI. (Well, you can, but not if you expect it to WORK. Or if you don't want to replace burned out pieces of hardware.) Generally, for hotpluggable bus types, we have a daemon. There's one for pcmcia/cardbus devices, for example. I'm guessing there's something for USB (I don't use it). All of this is sort of getting not-exactly integrated into devfs, which also has a userspace daemon and does automatic device detection.

Auto-detecting oddball peripherals connected to serial and paralell ports (mice and printers) is a problem for things like XFree86 or the print spooler that actually uses them. (And if you run kudzu it'll get those too, it just doesn't know WHEN to run because they don't generate a hotplug interrupt when they get changed.) Again, a user space issue.

As for downloading fresh drivers newer than your distribution (ala debian's apt-get), that's tangled up in binary compatability issues between module versions. Installing modules for just about every single supported driver takes up... ("du /lib/modules/2.4.2-2"...) 22 megabytes. I have PDF files larger than that. (If you want to start a binary module compatability flamewar, feel free, but it's an ooooooooold issue steeped in politics.)

As for replacing the entire kernel without the user prompting... That's just plain dangerous. (Especially aimed at users who dunno what to do when things go wrong. And I'm not just talking about 2.4.11...)

Quoted 2 lines

I expect that there will be many technical or other objections to such a
system.

Such as the fact it's pretty much already been implemented by distribution vendors, and is not really a kernel issue at all but a user space issue?

I also expect to get ripped apart by at least a few hackers out

Quoted 3 lines

there. However, that's great! I want input. I think this or a similar mechanism could really increase the ease of use for the "average user" and his nephew's godmother's granddaughter's roommate's dog, etc., etc.

Have you tried Red Hat 7.2, with the KDE desktop? My cat HAS tried to use it. (Sphynx sent an email I wasn't finished typing. Sat right in my lap, reached out and pressed the mouse button. Kind of impolite, I thought. Then again she's a lap cat, which means my laptop and her body compete for the same ecological niche...)

Quoted 2 lines

Thank you!
- Josh Hansen

There's an old saying on usenet. If you want answers, don't ask questions. Post errors. It works for me.

Rob

#3 lore raw
Quoted 2 lines

stuff. You can't hotplug PCI. (Well, you can, but not if you expect it to WORK. Or if you don't want to replace burned out pieces of hardware.)

You can hotplug PCI. It's called cardbus. There is also full hotplug PCI in the -ac kernel tree for people with expensive motherboards. The kernel handles a fair bit of it ok. Hotplugging the video console isnt a good idea right now, and the disk drivers need work, but for basic stuff like network cards it works out.

Alan