Using iptables level7/ipp2p match in a bridge
Subject almost says it all, I wonder if there is a way for me to use iptables matches like l7 and/or ipp2p match in a bridge ( one ethernet in and one ethernet out ) ?
Regards.
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Quoted 3 lines · Ming-Ching Tiew
Subject almost says it all, I wonder if there is a way for me to use iptables matches like l7 and/or ipp2p match in a bridge ( one ethernet in and one ethernet out ) ?
Yes there is. Read my previous post
(http://mailman.ds9a.nl/pipermail/lartc/2006q4/019935.html) for more information. In short, what you want to do is enable IPTables (layer 3 and up) to be able to operate on bridged (layer 2) traffic. "Bridged IP/ARP packets filtering" will allow you to do exactly what you are wanting to do.
Grant. . . .
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
From: "Grant Taylor" <[email protected]>
Quoted 8 lines
Yes there is. Read my previous post
(http://mailman.ds9a.nl/pipermail/lartc/2006q4/019935.html) for more information. In short, what you want to do is enable IPTables (layer 3 and up) to be able to operate on bridged (layer 2) traffic. "Bridged IP/ARP packets filtering" will allow you to do exactly what you are wanting to do.
Thank you for a reply which comes in so useful. I would like to get into a bit more details. Assuming I have already enable the kernel options, do you mean if I want to mark ipp2p traffic, I will do something like this :-
iptables -A FORWARD -m ipp2p --ipp2p -j MARK --set-mark 6
If I set more options such as "-i eth0 -o eth1" will I be able to capture the traffic more particularly ?
Regards
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Quoted 3 lines · Ming-Ching Tiew
Thank you for a reply which comes in so useful. I would like to get into a bit more details. Assuming I have already enable the kernel options, do you mean if I want to mark ipp2p traffic, I will do something like this :-
You are welcome.
Quoted 1 line
iptables -A FORWARD -m ipp2p --ipp2p -j MARK --set-mark 6
Yes, with "Bridged IP/ARP packets filtering" you can do that.
Quoted 2 lines
If I set more options such as "-i eth0 -o eth1" will I be able to capture the traffic more particularly ?
In short yes. "Bridged IP/ARP packets filtering" allows IPTables to see bridged traffic. This means that any filtering you can do with IPTables can now be done on bridged traffic.
Grant. . . .
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc