Skip to contentSkip to conversation

2.4.10 and ext3

DISCUSSION Mike Black 2 participants 2 messages Sep 24, 2001

lore
Share & tools
lore

Mike Black

author
#0 lore raw

Status report...
Upgraded from 2.4.8 to 2.4.10 (with new 2.4.10 patch). This is on a dual PIII/1Ghz FibreChannel 2G RAM

Single-threaded Seq Read improves a LOT (doubles+) Multi-threaded Seq Read improved a bit
Seq Write improves a LOT
Rand Write decreases a bit
All are using less CPU time.

Here's 2.4.8
Linux yeti 2.4.8 #2 SMP Fri Aug 17 05:50:03 EDT 2001 i686 unknown Done 9/5/01

root@yeti:/usr5# tiobench.pl --size 4000
Size is MB, BlkSz is Bytes, Read, Write, and Seeks are MB/secd . -T
         File   Block  Num  Seq Read    Rand Read   Seq Write  Rand Write
  Dir    Size   Size   Thr Rate (CPU%) Rate (CPU%) Rate (CPU%) Rate (CPU%)
------- ------ ------- --- ----------- ----------- ----------- -----------
   .     4000   4096    1  39.83 30.8% 0.572 0.87% 21.83 55.8% 1.226 0.70%
   .     4000   4096    2  21.30 21.2% 0.711 1.52% 9.695 70.0% 1.274 1.05%
   .     4000   4096    4  18.86 19.6% 0.844 1.92% 9.568 70.1% 1.228 1.62%
   .     4000   4096    8  17.38 18.7% 0.983 2.12% 5.995 98.7% 1.255 1.54%

Here's 2.4.10
tiobench.pl --size 4000
Size is MB, BlkSz is Bytes, Read, Write, and Seeks are MB/secd . -T

         File   Block  Num  Seq Read    Rand Read   Seq Write  Rand Write
  Dir    Size   Size   Thr Rate (CPU%) Rate (CPU%) Rate (CPU%) Rate (CPU%)
------- ------ ------- --- ----------- ----------- ----------- -----------
   .     4000   4096    1  85.57 46.9% 0.689 0.83% 26.02 28.7% 0.993 0.57%
   .     4000   4096    2  28.08 16.4% 0.805 1.36% 25.71 36.4% 1.062 0.57%
   .     4000   4096    4  22.50 13.5% 0.927 1.76% 16.69 26.3% 1.097 0.72%
   .     4000   4096    8  20.37 12.6% 1.062 2.00% 13.01 21.5% 1.114 0.85%

________________________________________
Michael D. Black Principal Engineer
[email protected] 321-676-2923,x203
http://www.csihq.com Computer Science Innovations
http://www.csihq.com/~mike My home page FAX 321-676-2355

#1 lore raw
Quoted 29 lines · Mike Black

Status report...
Upgraded from 2.4.8 to 2.4.10 (with new 2.4.10 patch). This is on a dual PIII/1Ghz FibreChannel 2G RAM

Single-threaded Seq Read improves a LOT (doubles+) Multi-threaded Seq Read improved a bit
Seq Write improves a LOT
Rand Write decreases a bit
All are using less CPU time.

Here's 2.4.8
Linux yeti 2.4.8 #2 SMP Fri Aug 17 05:50:03 EDT 2001 i686 unknown Done 9/5/01

root@yeti:/usr5# tiobench.pl --size 4000
Size is MB, BlkSz is Bytes, Read, Write, and Seeks are MB/secd . -T
         File   Block  Num  Seq Read    Rand Read   Seq Write  Rand Write
  Dir    Size   Size   Thr Rate (CPU%) Rate (CPU%) Rate (CPU%) Rate (CPU%)
------- ------ ------- --- ----------- ----------- ----------- -----------
   .     4000   4096    1  39.83 30.8% 0.572 0.87% 21.83 55.8% 1.226 0.70%
   .     4000   4096    2  21.30 21.2% 0.711 1.52% 9.695 70.0% 1.274 1.05%
   .     4000   4096    4  18.86 19.6% 0.844 1.92% 9.568 70.1% 1.228 1.62%
   .     4000   4096    8  17.38 18.7% 0.983 2.12% 5.995 98.7% 1.255 1.54%

Here's 2.4.10
tiobench.pl --size 4000
Size is MB, BlkSz is Bytes, Read, Write, and Seeks are MB/secd . -T

Quoted 8 lines
         File   Block  Num  Seq Read    Rand Read   Seq Write  Rand Write
  Dir    Size   Size   Thr Rate (CPU%) Rate (CPU%) Rate (CPU%) Rate (CPU%)
------- ------ ------- --- ----------- ----------- ----------- -----------
   .     4000   4096    1  85.57 46.9% 0.689 0.83% 26.02 28.7% 0.993 0.57%
   .     4000   4096    2  28.08 16.4% 0.805 1.36% 25.71 36.4% 1.062 0.57%
   .     4000   4096    4  22.50 13.5% 0.927 1.76% 16.69 26.3% 1.097 0.72%
   .     4000   4096    8  20.37 12.6% 1.062 2.00% 13.01 21.5% 1.114 0.85%

So the sequential write rate at eight threads has quadrupled, while the CPU utilisation has halved. That's OK :)

None of this will be due to ext3, BTW: it'll be due to VM and/or RAID5 improvements.

-