Parallel build not working since -test6?
Lately I've noticed my kernel compilations taking longer than usual. Tonight I finally realized the cause... Parallel building (i.e. make -jN) is no longer working for me. I traced it back and the last kernel it worked in was -test5. It ceased working in -test6.
Not to point fingers, but I do notice that the kbuild separate output directory patch went into -test6...
Build environment details:
arch: i386
make: GNU Make version 3.79.1
gcc: gcc version 2.96 20000731 (Red Hat Linux 7.1 2.96-98) output directory: default (i.e. source dir)
I can narrow it down to a -bk if that's useful or if someone has a patch to back out the separate output dir kbuild changes I can give that a whirl...
--Adam
Quoted 4 lines · Adam Kropelin
Lately I've noticed my kernel compilations taking longer than usual. Tonight I finally realized the cause... Parallel building (i.e. make -jN) is no longer working for me. I traced it back and the last kernel it worked in was -test5. It ceased working in -test6.
It works for me, and for sure it works for most others. Otherwise I would have seen lot of complaints like yours.
I recall one similar post, and the person in question used a homegrown script that caused the problems.
Could you try to post:
a) Exact command used when building the kernel.
b) Output of kernel compile [first 100 lines] after a make clean
This may give me a hint of what is wrong.
Sam
Quoted 5 lines · Sam Ravnborg
Quoted 4 lines · Adam Kropelin
Lately I've noticed my kernel compilations taking longer than usual. Tonight I finally realized the cause... Parallel building (i.e. make -jN) is no longer working for me. I traced it back and the last kernel it worked in was -test5. It ceased working in -test6.
Quoted 7 lines
It works for me, and for sure it works for most others. Otherwise I would have seen lot of complaints like yours.
I recall one similar post, and the person in question used a homegrown script that caused the problems.Could you try to post:
a) Exact command used when building the kernel.
make oldconfig
make -j2 install
(Also tried 'make -j2 bzImage' with no change in behavior observed.)
I always do this directly from the command line, no special scripts.
Quoted 1 line
b) Output of kernel compile [first 100 lines] after a make clean
Attached since I'm sure this mail client will wrap it horribly otherwise. I enabled verbose mode for the capture since I figured you probably wanted all the details you could get. This particular compile is for -test6, the first non-working version.
An additional item I just noticed...I do see 2 parallel builds for the very first part of the session (when various items in the scripts/ directory are being compiled). As soon as the scripts/ directory is finished, I only see one process and my idle cpu usage jumps to about 40% (from 0%).
I'm happy to try anything else you wish...
--Adam
Quoted 9 lines · Sam Ravnborg
Quoted 4 lines · Adam Kropelin
Lately I've noticed my kernel compilations taking longer than usual. Tonight I finally realized the cause... Parallel building (i.e. make -jN) is no longer working for me. I traced it back and the last kernel it worked in was -test5. It ceased working in -test6.
It works for me, and for sure it works for most others. Otherwise I would have seen lot of complaints like yours.
I recall one similar post, and the person in question used a homegrown script that caused the problems.
Well, this explains why 2.6.x builds so much slower here than it did a few kernels ago.
make -j3 improves things. but currently, make -j2 doesn't use both my cpus.
no scripts, just make -j2 bzImage
Quoted 12 lines · Derek Foreman
Quoted 9 lines · Sam Ravnborg
Quoted 4 lines · Adam Kropelin
Lately I've noticed my kernel compilations taking longer than usual. Tonight I finally realized the cause... Parallel building (i.e. make -jN) is no longer working for me. I traced it back and the last kernel it worked in was -test5. It ceased working in -test6.
It works for me, and for sure it works for most others. Otherwise I would have seen lot of complaints like yours.
I recall one similar post, and the person in question used a homegrown script that caused the problems.
Quoted 7 lines
Well, this explains why 2.6.x builds so much slower here than it did a few kernels ago.
make -j3 improves things. but currently, make -j2 doesn't use both my cpus.
no scripts, just make -j2 bzImage
Ah, yes... -j3 gets me 2 cpp/cc pairs as well.
What I see with -j3 is 1 parent make process and two make child processes. With -j2 I see one parent and one child. Leaving -j off entirely gives the same as -j2.
-j3:
root 25314 15539 0 Nov27 tty1 00:00:00 make -j3 bzImage root 25545 25314 0 Nov27 tty1 00:00:00 make -f scripts/Makefile.build obj=arch/i386/kernel root 25814 25314 0 Nov27 tty1 00:00:00 make -f scripts/Makefile.build obj=kernel
-j2:
root 26391 15539 0 Nov27 tty1 00:00:00 make -j2 bzImage root 26582 26391 0 Nov27 tty1 00:00:00 make -f scripts/Makefile.build obj=init
--Adam