Qt make: g++: Command not found issue with SDK generated for soloX
i have used following steps to get and build the BSP for soloX sabre board. i am using Krogoth branch to build the bsp and populate sdk
https://github.com/Freescale/fsl-community-bsp-platform
then i added qt support in the build by following
http://wiki.wandboard.org/index.php/Building_Qt5_using_yocto_on_Wandboard
after that i bitbaked toolchain for this using following
$ bitbake meta-toolchain-qt5
after this i generated sdk using following command
$ bitbake <image-name> -c populate_sdk
and then i installed the sdk on my development machine, it is installed under
/opt/poky/2.1.1/
now i installed and setup latest Qt by using following steps
https://community.nxp.com/thread/309578
After all this setup done, i created a simple console application and trying to build it, and i get an error as
14:10:10: Running steps for project HelloWorld...
14:10:10: Configuration unchanged, skipping qmake step. 14:10:10: Starting: "/usr/bin/make"
g++ -c -pipe -O2 -std=gnu++0x -Wall -W -D_REENTRANT -fPIC -DQT_NO_DEBUG -DQT_CORE_LIB -I../HelloWorld -I. -I/opt/poky/2.1.1/sysroots/cortexa9hf-neon-poky-linux-gnueabi/usr/include/qt 5 -I/opt/poky/2.1.1/sysroots/cortexa9hf-neon-poky-linux-gnueabi/usr/include/qt 5/QtCore -I. -I/opt/poky/2.1.1/sysroots/cortexa9hf-neon-poky-linux-gnueabi/usr/lib/qt5/mk specs/linux-g++ -o main.o ../HelloWorld/main.cpp
make: g++: Command not found
make: *** [main.o] Error 127
14:10:10: The process "/usr/bin/make" exited with code 2.
Error while building/deploying project HelloWorld (kit: mx6solox) The kit mx6solox has configuration issues which might be the root cause for this problem.
When executing step "Make"
14:10:10: Elapsed time: 00:00.
i have googled a lot but could not find any solution on this.
Can somebody please help on this...
Kind Regards,
Alankar Dhobale
As per the documentation, the compiler isn't just "gcc" but has the full platform triple in:
http://www.yoctoproject.org/docs/2.1/sdk-manual/sdk-manual.html#makefile-based-projects
One you've sourced the setup script these are set as $CC and so on, so your makefile should be using $CC instead of 'gcc'.
Ross
Quoted 98 lines · Alankar Dhobale
i have used following steps to get and build the BSP for soloX sabre board. i am using Krogoth branch to build the bsp and populate sdk
https://github.com/Freescale/fsl-community-bsp-platform
then i added qt support in the build by following
http://wiki.wandboard.org/index.php/Building_Qt5_using_yocto_on_Wandboard
after that i bitbaked toolchain for this using following
$ bitbake meta-toolchain-qt5after this i generated sdk using following command
$ bitbake <image-name> -c populate_sdkand then i installed the sdk on my development machine, it is installed under
/opt/poky/2.1.1/now i installed and setup latest Qt by using following steps
https://community.nxp.com/thread/309578
After all this setup done, i created a simple console application and trying to build it, and i get an error as
14:10:10: Running steps for project HelloWorld...
14:10:10: Configuration unchanged, skipping qmake step. 14:10:10: Starting: "/usr/bin/make"
g++ -c -pipe -O2 -std=gnu++0x -Wall -W -D_REENTRANT -fPIC -DQT_NO_DEBUG -DQT_CORE_LIB -I../HelloWorld -I. -I/opt/poky/2.1.1/sysroots/ cortexa9hf-neon-poky-linux-gnueabi/usr/include/qt5(quoted diff) +0
-2-I/opt/poky/2.1.1/sysroots/cortexa9hf-neon-poky-linux-gnueabi/usr/include/qt5/QtCore -I. -I/opt/poky/2.1.1/sysroots/cortexa9hf-neon-poky-linux-gnueabi/usr/lib/qt5/mkspecs/linux-g++ -o main.o ../HelloWorld/main.cpp
make: g++: Command not found
make: *** [main.o] Error 127
14:10:10: The process "/usr/bin/make" exited with code 2. Error while building/deploying project HelloWorld (kit: mx6solox) The kit mx6solox has configuration issues which might be the root cause for this problem.
When executing step "Make"
14:10:10: Elapsed time: 00:00.i have googled a lot but could not find any solution on this.
Can somebody please help on this...
Kind Regards,
*Alankar Dhobale*
--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
Hello Ross,
Thanks for your reply, but I did not get you, I actually sourced the setup script for the sdk toolchain installed at path /opt/poky/2.1.1/…
But I think “make” is somehow calling g++ instead of calling arm-poky-linux-gnueabi-g++. I am not sure about the generated sdk is correct?
Alankar
From: Burton, Ross [mailto:[email protected]]
Sent: 09/12/2016 6:05 PM
To: Alankar Dhobale
Cc: [email protected]
Subject: Re: [yocto] Qt make: g++: Command not found issue with SDK generated for soloX
As per the documentation, the compiler isn't just "gcc" but has the full platform triple in:
http://www.yoctoproject.org/docs/2.1/sdk-manual/sdk-manual.html#makefile-based-projects
One you've sourced the setup script these are set as $CC and so on, so your makefile should be using $CC instead of 'gcc'.
Ross
On 9 December 2016 at 11:57, Alankar Dhobale <[email protected]> wrote:
i have used following steps to get and build the BSP for soloX sabre board. i am using Krogoth branch to build the bsp and populate sdk
https://github.com/Freescale/fsl-community-bsp-platform
then i added qt support in the build by following
http://wiki.wandboard.org/index.php/Building_Qt5_using_yocto_on_Wandboard
after that i bitbaked toolchain for this using following
$ bitbake meta-toolchain-qt5
after this i generated sdk using following command
$ bitbake <image-name> -c populate_sdk
and then i installed the sdk on my development machine, it is installed under
/opt/poky/2.1.1/
now i installed and setup latest Qt by using following steps
https://community.nxp.com/thread/309578
After all this setup done, i created a simple console application and trying to build it, and i get an error as
14:10:10: Running steps for project HelloWorld...
14:10:10: Configuration unchanged, skipping qmake step.
14:10:10: Starting: "/usr/bin/make"
g++ -c -pipe -O2 -std=gnu++0x -Wall -W -D_REENTRANT -fPIC -DQT_NO_DEBUG -DQT_CORE_LIB -I../HelloWorld -I. -I/opt/poky/2.1.1/sysroots/cortexa9hf-neon-poky-linux-gnueabi/usr/include/qt5 -I/opt/poky/2.1.1/sysroots/cortexa9hf-neon-poky-linux-gnueabi/usr/include/qt5/QtCore -I. -I/opt/poky/2.1.1/sysroots/cortexa9hf-neon-poky-linux-gnueabi/usr/lib/qt5/mkspecs/linux-g++ -o main.o ../HelloWorld/main.cpp
make: g++: Command not found
make: *** [main.o] Error 127
14:10:10: The process "/usr/bin/make" exited with code 2.
Error while building/deploying project HelloWorld (kit: mx6solox)
The kit mx6solox has configuration issues which might be the root cause for this problem.
When executing step "Make"
14:10:10: Elapsed time: 00:00.
i have googled a lot but could not find any solution on this.
Can somebody please help on this...
Kind Regards,
Alankar Dhobale
--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
Quoted 5 lines · Alankar Dhobale
But I think “make” is somehow calling g++ instead of calling arm-poky-linux-gnueabi-g++. I am not sure about the generated sdk is correct?
I'd check the generated makefiles, or your qmake files. As the documentation linked says, if you are writing bare makefiles then pass -e. If you're not, then you need to do whatever is relevant.
Ross