Skip to contentSkip to conversation

2..4.5-pre5 bad fsck

DISCUSSION Mike Black 1 participant 1 message May 24, 2001

lore
Share & tools
lore

Mike Black

author
#0 lore raw

2.4.2 works fine.
2.4.5-pre5 won't get past fsck of /dev/md0 -- locks up towards the end. I'm running the same kernel on two other machine (different motherboards though) I'm using gcc-3.0 and glibc-2.2.3

/dev/md0 is a dual-IDE RAID1 (2nd drive is currently disabled) md0 : active raid1 hda1[0]

      39082560 blocks [2/1] [U_]

Under 2.4.2 boot fsck ends
/dev/md0 was not cleanly unmounted, check forced. /dev/md0: x/x files (x% non-contiguous), x/x blocks

But under 2.4.5-pre5 it doesn't get past the first "check forced" message. It just locks up completely after it runs for a couple of minutes.

Motherboard is SuperMicro 370dl3
Disk WDC WD400BB-00AUA1
PCI Info:
00:00.0 Host bridge: Relience Computer CNB20HE (rev 05) 00:00.1 Host bridge: Relience Computer CNB20HE (rev 05) 00:0f.1 IDE interface: Relience Computer: Unknown device 0211

________________________________________
Michael D. Black Principal Engineer
[email protected] 321-676-2923,x203
http://www.csihq.com Computer Science Innovations
http://www.csihq.com/~mike My home page FAX 321-676-2355