New user: need a hand booting the kernel from NAND
Machine is a custom at91sam9g45 board with NOR and NAND flash. The bootstrap loader and barebox, and barebox environment are in the NOR flash. All seems to be working well there. The NAND is partitioned into 2 chunks:
2560K(kernel),-(root)
I used ubimkvol to create a volume on root and the nfs command to put a root filesystem on it. Seems to work fine if I get the kernel via NFS.
I have a good working kernel in uImage format, and used "nfs /var/share/uImage /dev/nand0.kernel.bb" in an attempt to write it to the 2560K partition. The nfs copy seemed to work fine. However, it will not accept the image. I get messages about an unknown format, suggesting to try -f. Was it the wrong procedure that I used to copy the uImage ?
Thanks for any help or pointers.
George
_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
Quoted 12 lines · George Pontis
Machine is a custom at91sam9g45 board with NOR and NAND flash. The bootstrap loader and barebox, and barebox environment are in the NOR flash. All seems to be working well there. The NAND is partitioned into 2 chunks:
2560K(kernel),-(root)I used ubimkvol to create a volume on root and the nfs command to put a root filesystem on it. Seems to work fine if I get the kernel via NFS.
Quoted 5 lines
I have a good working kernel in uImage format, and used "nfs
/var/share/uImage/dev/nand0.kernel.bb" in an attempt to write it to the 2560K partition. The nfs copy seemed to work fine. However, it will not accept the image. I get messages about an unknown format, suggesting to try -f. Was it the wrong procedure that I used to copy the uImage ?
Have you erased you nand before (erase /dev/nand0.kernel.bb)?
Sascha
Signature · 9 lines
Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
Quoted 20 lines · George Pontis
Machine is a custom at91sam9g45 board with NOR and NAND flash. The bootstrap loader and barebox, and barebox environment are in the NOR flash. All seems to be working well there. The NAND is partitioned into 2
chunks: 2560K(kernel),-(root)I used ubimkvol to create a volume on root and the nfs command to put a root filesystem on it. Seems to work fine if I get the kernel via NFS.
I have a good working kernel in uImage format, and used "nfs
/var/share/uImage/dev/nand0.kernel.bb" in an attempt to write it to the
2560K partition. The nfs copy seemed to work fine. However, it will not accept the image. I get messages about an unknown format, suggesting to try -f. Was it the wrong procedure that I used to copy the uImage ?
Quoted 1 line
Thanks for any help or pointers.
I recommand you to use upate command to bo so
update -t kernel -d nand -m nfs -f /var/share/uImage
I recommand you also to drop the uImage support and boot the zImage directly
you will boot more fast
and I also recommand you to boot from nor if you can
so you don't need the bootstrap
Best Regards,
J.
_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox