IPTABLES problem
My experimental backbone is the following:
B
3.4/|\2.4
/5.4\
/ | \
(A1) 1.3/ | \2.2
10.1.1.2--10.1.1.1 -- A | C----192.168.67.91---192.168.67.90 (C1)
1.1\ | /4.2
\ | /
\5.3/
1.3\|/4.3
DI´m using IPTABLES version 1.2.4-dscp do set up the tos value of the packets. I´m creating the following rule on A and C
iptables -A PREROUTING -t mangle -p icmp -j FTOS --set-ftos 0x28 or iptables -A FORWARD -t mangle -p icmp -j FTOS --set-ftos 0x28
But when i try do ping from A1 to C1 or from C1 to A1
The chechshum of the ip on the reply message is incorrect, so the packet is droped on (B) or (D)
I would like to know, how can i avoid dropping the packet and still using the same version of iptables and rules
Alex
Quoted 2 lines · Alexandre Carlos
I´m using IPTABLES version 1.2.4-dscp do set up the tos value of the packets. I´m creating the following rule on A and C
Unfortunately this is a very old version of iptables (about one year) and the FTOS target is not officially supported by the project.
If there were any issues, I wouldn't even remember, sorry.
Please try a more recent version of iptables
Quoted 1 line
Alex
Signature · 4 lines
- Harald Welte / [email protected] http://www.gnumonks.org/ ============================================================================ "If this were a dictatorship, it'd be a heck of a lot easier, just so long as I'm the dictator." -- George W. Bush Dec 18, 2000