mpc8313 nand setup

Hi All,

I am working on a MPC8313ERDB REVA4 board and need to work with a nand device using u-boot. I am using u-boot version 1.3.2 and under the driver/mtd/nand directory there is a file called nand.c. In this file it makes a call to a function called board_nand_init(). From what I can tell this function is suppose to be located another nand.c file located in board/freescale/mpc8313erdb but it seems to be missing. I found this missing file on the website www.bitshrine.org/gpp/u-boot-1.1.6-mpc8313erdb-board.patch. But I haven't been able to get the source code (nand.c) to compile it (unless I comment out all errors of course). Any help would be greatly appreciated.

Thanks

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20080421/264646b0/attachment.htm

There were patches posted to this list a few weeks ago:

http://sourceforge.net/mailarchive/message.php?msg_id=20080324175302.GA1280%40ld0162-tx32.am.freescale.net
http://sourceforge.net/mailarchive/message.php?msg_id=20080324175304.GB1280%40ld0162-tx32.am.freescale.net

I'm not sure if there's any way to get an unmangled e-mail from sourceforge's archives, though.

-Scott