Skip to contentSkip to conversation

TCP performance eepro100

DISCUSSION Jon 2 participants 2 messages Dec 7, 2001

lore
Share & tools
lore

Jon

author
#0 lore raw

Has anyone done testing on eepro100 and seen really poor performance? I am seeing that the eepro100 in SuSE 2.4.7 and above is 50% slower than than 2.4.2 in RH 7.1 I am doing a simple test with ttcp against another RH server and then SuSE vs SuSE or vs the RH system. In all cases the eepro100at best shows 39mbs. In modules.conf I am setting options="0x30" that forces 100mbps Full Duplex, this is also reflected in dmesg. With the new intel e100 it is possible to get 60mbps on SuSE. Is there something in the Kernel build or Driver build that is multi-casting or filtering that may cause this? Any ideas at this point would help. BTW, I am using SMP Kernels on all the systems.

Regards,

Jon

#1 lore raw
Quoted 10 lines · Jon

Has anyone done testing on eepro100 and seen really poor performance? I am seeing that the eepro100 in SuSE 2.4.7 and above is 50% slower than than 2.4.2 in RH 7.1 I am doing a simple test with ttcp against another RH server and then SuSE vs SuSE or vs the RH system. In all cases the eepro100at best shows 39mbs. In modules.conf I am setting options="0x30" that forces 100mbps Full Duplex, this is also reflected in dmesg. With the new intel e100 it is possible to get 60mbps on SuSE. Is there something in the Kernel build or Driver build that is multi-casting or filtering that may cause this? Any ideas at this point would help. BTW, I am using SMP Kernels on all the systems.

Jon,

No great thoughts other than to report that I did netpipe-tcp (from Debian woody) testing of my eepro100's using a custom SMP 2.4.9 kernel, and easily saw 90 megabits per second. Sorry I couldn't help more.

Take care,
Daniel

Quoted 4 lines

Regards,

Jon

Signature · 4 lines
Daniel A. Freedman
Laboratory for Atomic and Solid State Physics
Department of Physics
Cornell University