md: Introduction
Quoted 8 lines · Neil Brown
These can be mixed together quite effectively:
You can have dm/lvm over md/raid1 over dm/multipath with no problems.If there is functionality missing from any of these recommended components, then make a noise about it, preferably but not necessarily with code, and it will quite possibly be fixed.
Chiepest high capacity is now provided through USB connected external disks. Of course, it's for very low load.
So, what would be helpfull is let's say have 7 usefull disks, plus 1 for parity (just like RAID4), but with not a result of one large partition, but with the result of seven partitions, one on each disk.
So, in case of one disk failure, you loose no data,
in case of two disks failure, you loose 1/7 partition,
in case of three disks failure, you loose 2/7 partitions, etc, because if the RAID4 is unusable, you can still read each partition as a non raid partition.
Somebody suggested that it could be done through LVM, but I failed to find the way to configure LVM on top of RAID4 or RAID5 to grant that each partition sectors are consecutive all on a single physical disk.