Convert Pico-Pi i.MX7D to DM
Hi all,
I try to convert Pico-Pi i.MX7D to DM but I'm having some trouble with pmic and ethernet.
you can see the log lower
Do you have an idea to solve this?
Thanks in advance.
Best Regards,
Joris Offouga
-------------- next part --------------
A non-text attachment was scrubbed...
Name: ohbbkedahilmilbe.png
Type: image/png
Size: 66815 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190118/69075816/attachment.png>
Hi Joris,
Quoted 8 lines · Joris Offouga
Hi all,
I try to convert Pico-Pi i.MX7D to DM but I'm having some trouble with pmic and ethernet.
you can see the log lowerDo you have an idea to solve this?
Maybe you could take a look at Byan's patch that converted imx7s-warp to use PMIC DM:
https://patches.linaro.org/patch/156034/
You also need to convert I2C first.
Bryan's complete series can be found here:
https://patches.linaro.org/project/u-boot/list/
Hope this helps and looking forward to your patches :-)
Regards,
Fabio Estevam
A message that is not in the archive (sent off-list or not yet received): [email protected]
Hi Joris,
[Please keep the list on Cc]
Quoted 27 lines · Joris Offouga
I convert I2C first , it work but pmic function return wrong error :
read error from device:
9df65458register:0x3!
PMIC: PFUZE3000 DEV_ID=0x18764000 REV_ID=0xfffffffb read error from device:9df65458register:0x69! write error to device:9df65458register:0x23! write error to device:9df65458register:0x31! write error to device:9df65458register:0x21! write error to device:9df65458register:0x2f! read error from device:9df65458register:0x2e! write error to device:9df65458register:0x2e!When
DM_USBis enable, I use dfu 0 mmc 0 for update spl and u-boot. SPL update normally but u-boot.img is causing an error :#Deferred
dfu_flush()failed!=>For the moment here is the result of the conversion :
U-Boot SPL 2019.01-rc3-dirty (Jan 20 2019 - 18:17:05 +0100) Trying to boot from USB SDP
SDP: initialize...
SDP: handle requests...
Downloading file of size 553025 to0x877fffc0... done Jumping to header at0x877fffc0
Header Tag is not an IMX image
Quoted 1 line
U-Boot 2019.01-rc3-dirty (Jan 20 2019 - 18:17:05 +0100)
Could you please use a more recent U-Boot? 2019.01 has been released already.
Quoted 14 lines
CPU: Freescale i.MX7D rev1.2 1000 MHz (running at 792 MHz) CPU: Commercial temperature grade (0C to 95C) at 48C Reset cause: POR Model: TechNexion PICO-IMX7D Board and PI baseboard Board: i.MX7D PICOSOM DRAM: 512 MiB read error from device: 9df65458 register: 0x3! PMIC: PFUZE3000 DEV_ID=0x18764000 REV_ID=0xfffffffb read error from device: 9df65458 register: 0x69! write error to device: 9df65458 register: 0x23! write error to device: 9df65458 register: 0x31! write error to device: 9df65458 register: 0x21! write error to device: 9df65458 register: 0x2f! read error from device: 9df65458 register: 0x2e!
Quoted 8 lines
write error to device: 9df65458 register: 0x2e! MMC: FSL_SDHC: 2, FSL_SDHC: 1, FSL_SDHC: 0 Loading Environment from MMC... OK In: serial at 30a70000 Out: serial at 30a70000 Err: serial at 30a70000 Net: eth0: ethernet at 30be0000 Hit any key to stop autoboot: 0
At least the Ethernet GPIO error is gone :-)
Could you please post your patch as RFC to the list so that we can try to understand what is going wrong?
Thanks