Skip to contentSkip to conversation

ADD SEL Command , support or not

OpenBMC Tiger Liu(BJ-RD) 2 participants 2 messages Aug 6, 2020

lore
Share & tools
lore
#0 lore raw

Hi, Experts:
I have a question about "ADD SEL" command.

I am trying OpenBMC Code with a motherboard(with AST2500 chip).

I tried to send an ADD SEL command to BMC FW, but failed.
The response data's record ID is all FF, it seemed not a normal record ID.

So, my question is:
Current OpenBMC Firmware supports "ADD SEL" command?

Thanks

?????
?????????????????????????????????????????????????????
CONFIDENTIAL NOTE:
This email contains confidential or legally privileged information and is for the sole use of its intended recipient. Any unauthorized review, use, copying or forwarding of this email or the content of this email is strictly prohibited.

#1 lore raw
Quoted 6 lines · Tiger Liu(BJ-RD)

Hi, Experts:

I have a question about “ADD SEL” command.

I am trying OpenBMC Code with a motherboard(with AST2500 chip).

Quoted 7 lines

I tried to send an ADD SEL command to BMC FW, but failed.

The response data’s record ID is all FF, it seemed not a normal record ID.

So, my question is:

Current OpenBMC Firmware supports “ADD SEL” command?

In intel-ipmi-oem, we don't support adding raw data to the IPMI SEL, so the ADD SEL command is overridden to add the raw SEL data to the Redfish event log. It will return 0xFFFF to show that the command was successful but no valid IPMI SEL entry was added, which may be what you are seeing if you use intel-ipmi-oem.

Quoted 9 lines

Thanks

保密声明:
本邮件含有保密或专有信息,仅供指定收件人使用。严禁对本邮件或其内容做任何 未经授权的查阅、使用、复制或转发。
/CONFIDENTIAL NOTE: /
/This email contains confidential or legally privileged information and is for the sole use of its intended recipient. Any unauthorized review, use, copying or forwarding of this email or the content of this email is strictly prohibited./