Hexagon: Add configuration and makefiles for the Hexagon architecture.

new file mode 100644
index 0000000..02513c2
@@ -0,0 +1,220 @@
+# Hexagon configuration
+comment "Linux Kernel Configuration for Hexagon"
+
+config HEXAGON
+	def_bool y
+	select HAVE_OPROFILE
+	select USE_GENERIC_SMP_HELPERS if SMP
+	# Other pending projects/to-do items.
+	# select HAVE_REGS_AND_STACK_ACCESS_API
+	# select HAVE_HW_BREAKPOINT if PERF_EVENTS
+	# select ARCH_HAS_CPU_IDLE_WAIT
+	# select ARCH_WANT_OPTIONAL_GPIOLIB
+	# select ARCH_REQUIRE_GPIOLIB
+	# select HAVE_CLK
+	# select IRQ_PER_CPU
+	select HAVE_IRQ_WORK
+	# select GENERIC_PENDING_IRQ if SMP
+	select GENERIC_ATOMIC64
+	select HAVE_PERF_EVENTS
+	select HAVE_GENERIC_HARDIRQS
+	select GENERIC_HARDIRQS_NO__DO_IRQ
+	select GENERIC_HARDIRQS_NO_DEPRECATED
+	# GENERIC_ALLOCATOR is used by dma_alloc_coherent()
+	select GENERIC_ALLOCATOR
+	select GENERIC_IRQ_SHOW
+	select HAVE_ARCH_KGDB
+	select HAVE_ARCH_TRACEHOOK
+	select NO_IOPORT
+	# mostly generic routines, with some accelerated ones
+	---help---
+	  Qualcomm Hexagon is a processor architecture designed for high
+	  performance and low power across a wide variety of applications.
+
+config HEXAGON_ARCH_V1
+	bool
+
+config HEXAGON_ARCH_V2
+	bool
+
+config HEXAGON_ARCH_V3
+	bool
+
+config HEXAGON_ARCH_V4
+	bool
+
+config FRAME_POINTER
+	def_bool y
+
+config LOCKDEP_SUPPORT
+	def_bool y
+
+config PCI
+	def_bool n
+
+config EARLY_PRINTK
+	def_bool y
+
+config KTIME_SCALAR
+	def_bool y
+
+config MMU
+	def_bool y
+
+config TRACE_IRQFLAGS_SUPPORT
+	def_bool y
+
+config GENERIC_CSUM
+	def_bool y
+
+#
+# Use the generic interrupt handling code in kernel/irq/:
+#
+config GENERIC_IRQ_PROBE
+	def_bool y
+
+config GENERIC_IOMAP
+	def_bool y
+
+#config ZONE_DMA
+#	bool
+#	default y
+
+config HAS_DMA
+	bool
+	select HAVE_DMA_ATTRS
+	default y
+
+config NEED_SG_DMA_LENGTH
+	def_bool y
+
+config RWSEM_GENERIC_SPINLOCK
+	def_bool n
+
+config RWSEM_XCHGADD_ALGORITHM
+	def_bool y
+
+config GENERIC_FIND_NEXT_BIT
+	def_bool y
+
+config GENERIC_HWEIGHT
+	def_bool y
+
+config GENERIC_TIME
+	def_bool y
+
+config GENERIC_CLOCKEVENTS
+	def_bool y
+
+config GENERIC_CLOCKEVENTS_BROADCAST
+	def_bool y
+
+config STACKTRACE_SUPPORT
+	def_bool y
+	select STACKTRACE
+
+config GENERIC_BUG
+	def_bool y
+	depends on BUG
+
+config BUG
+	def_bool y
+
+menu "Machine selection"
+
+choice
+	prompt "System type"
+	default HEXAGON_ARCH_V2
+
+config HEXAGON_COMET
+	bool "Comet Board"
+	select HEXAGON_ARCH_V2
+	---help---
+	  Support for the Comet platform.
+
+endchoice
+
+config HEXAGON_VM
+	def_bool y
+
+config CMDLINE
+	string "Default kernel command string"
+	default ""
+	help
+	  On some platforms, there is currently no way for the boot loader
+	  to pass arguments to the kernel. For these, you should supply some
+	  command-line options at build time by entering them here.  At a
+	  minimum, you should specify the memory size and the root device
+	  (e.g., mem=64M root=/dev/nfs).
+
+config HEXAGON_ANGEL_TRAPS
+	bool "Use Angel Traps"
+	default n
+	---help---
+	  Enable angel debug traps (for printk's).
+
+config SMP
+	bool "Multi-Processing support"
+	---help---
+	  Enables SMP support in the kernel.  If unsure, say "Y"
+
+config NR_CPUS
+	int "Maximum number of CPUs" if SMP
+	range 2 6 if SMP
+	default "1" if !SMP
+	default "6" if SMP
+	---help---
+	  This allows you to specify the maximum number of CPUs which this
+	  kernel will support.  The maximum supported value is 6 and the
+	  minimum value which makes sense is 2.
+
+	  This is purely to save memory - each supported CPU adds
+	  approximately eight kilobytes to the kernel image.
+
+choice
+	prompt "Kernel page size"
+	default PAGE_SIZE_4KB
+	---help---
+	  Changes the default page size; use with caution.
+
+config PAGE_SIZE_4KB
+	bool "4KB"
+
+config PAGE_SIZE_16KB
+	bool "16KB"
+
+config PAGE_SIZE_64KB
+	bool "64KB"
+
+config PAGE_SIZE_256KB
+	bool "256KB"
+
+endchoice
+
+source "mm/Kconfig"
+
+source "kernel/Kconfig.hz"
+source "kernel/time/Kconfig"
+
+config GENERIC_GPIO
+	bool "Generic GPIO support"
+	default n
+
+endmenu
+
+source "init/Kconfig"
+source "drivers/Kconfig"
+source "fs/Kconfig"
+
+menu "Executable File Formats"
+source "fs/Kconfig.binfmt"
+endmenu
+
+source "net/Kconfig"
+source "security/Kconfig"
+source "crypto/Kconfig"
+source "lib/Kconfig"
+
+menu "Kernel hacking"
+source "lib/Kconfig.debug"
+endmenu

59 lines not on this page · raw message

new file mode 100644
index 0000000..27be2f6
@@ -0,0 +1,19 @@
+extra-y := head.o vmlinux.lds init_task.o
+
+obj-$(CONFIG_SMP) += smp.o topology.o
+
+obj-y += setup.o irq_cpu.o traps.o syscalltab.o signal.o time.o
+obj-y += process.o syscall.o trampoline.o reset.o ptrace.o
+obj-y += vdso.o
+
+obj-$(CONFIG_KGDB)    += kgdb.o
+obj-$(CONFIG_MODULES) += module.o hexagon_ksyms.o
+
+# Modules required to work with the Hexagon Virtual Machine
+obj-y += vm_entry.o vm_events.o vm_switch.o vm_ops.o vm_init_segtable.o
+obj-y += vm_vectors.o
+
+obj-$(CONFIG_HAS_DMA) += dma.o
+
+obj-$(CONFIG_STACKTRACE) += stacktrace.o
+

93 lines not on this page · raw message

new file mode 100644
index 0000000..874655e
@@ -0,0 +1,4 @@
+#
+# Makefile for hexagon-specific library files.
+#
+obj-y = checksum.o io.o memcpy.o memset.o

new file mode 100644
index 0000000..018be76
@@ -0,0 +1,7 @@
+#
+# Makefile for Hexagon memory management subsystem
+#
+
+obj-y := init.o pgalloc.o ioremap.o uaccess.o vm_fault.o cache.o
+obj-y += copy_to_user.o copy_from_user.o strnlen_user.o vm_tlb.o
+