copy_from_user problem
Hello, I am working on a character driver for reading and writing the registers to FPGA in our system.
I am using driver ioctl to read/write to these registers of FPGA. As the function call to the ioctl is being made, the printk trace shows that the call goes to switch->copy_from_user. As soon as the call is made to copy_from_user, the kernel crashes Can someone help me with this problem?
***************************************************************************************************
Unhandled kernel unaligned access in unaligned.c::emulate_load_store_insn, line 483
:
$0 : 00000000 10001f00 8fbf0034 02a01021 801157a0 8fe8e000 10001f00 ffff00ff
$8 : 8fe8ffe0 00001f00 00000000 00000003 74652053 8fe9fed8 0000000a 50434942
$16: 10001f01 00000001 801157a0 0000000f 8fe8fee8 00000104 00000000 0000000f
$24: 00000000 2ac0fdb0 8fe8e000 8fe8fe38 00000001 8012010c
Hi : 00000000
Lo : 00000000
epc : 8011f774 Tainted: GF
Status: 10001f02
Cause : 00800014
Process rsgbm (pid: 317, stackpage=8fe8e000)
Stack: 802d920a 0000000a 10001f01 0000003c 10001f01 0000003c 8012010c
80120104 caa8f356 8fe82008 8fe82000 0000000f 00000000 7fff7d00 7fff7d00 0000c001 00000003 10012808 ffffffff caa8e548 00004000 8fe9e272 00000150 7fff7d00 ffffffea 00000000 00000240 8fe82000 00000000 00000001 00000001 7ebff310 00000000 0000000f 8fef24e0 00000004 7ebff3e8 00000000 0000002e 80159c6c ...
Call Trace: [<8012010c>] [<80120104>] [<caa8f356>] [<caa8e548>] [<80159c6c>] [<8010a5c4>] [<80271dc4>] Code: 8c820004 24110001 ac430000 <ac620004> ac800000 ac800004 ac800000 ac800004
8f820004
Unit Fault Handler !!! (INDEX=10)
**************************************************************************************************
intchr1_ioctl(struct inode *ino, struct file *filp, unsigned int cmd, unsigned long arg)
{
int ret = 0;
n2_debug_rw_reg *dw;
switch(cmd)
{
case IOCTL_WIN_DEBUG_READ_CODE:
{
n2_debug_rw_reg test;
printk("%s %d\n", current->comm, current->pid); printk("%lx\n", arg);
copy_from_user(&test, (n2_debug_rw_reg*)arg, sizeof(n2_debug_rw_reg)); printk("%lx %lx\n", ((n2_debug_rw_reg*)arg)->data, ((n2_debug_rw_reg*)arg)-> addr);
}
}
}
Thanks & Regards,
--Murahari
Hi, Murahari!
Quoted 1 line
I am working on a character driver for reading and writing the registers to FPGA in our system.
You didn't tell much about your system.
But checkout the examples in the book "Linux Device Drivers, 3rd Edition".
(http://lwn.net/images/pdf/LDD3/)
which is worth buying, too!
You might be missing some simple __user casts for your data structures you want to copy...
And you might need to ioremap the memory area of your fpga or whatever you need to access.
Quoted 1 line
epc :
8011f774Tainted: GF
^^^^^^^^^^^
And you might end up with less support here if you use a tainted Kernel.
Greets,
Clemens Koller
_______________________________
R&D Imaging Devices
Anagramm GmbH
Rupert-Mayer-Str. 45/1
81379 Muenchen
Germany
http://www.anagramm.de
Phone: +49-89-741518-50
Fax: +49-89-741518-19
Samsung Enterprise Portal mySingleMurahari,
I always start simple and work up to the harder things. Try to access a single
long word in the ioctl, e.g.,
int
chr1_ioctl(struct inode *ino, struct file *filp, unsigned int cmd, unsigned long arg)
{
int ret = 0;
unsigned int userdata;
switch(cmd)
{ case IOCTL_WIN_DEBUG_READ_CODE:
{
ret = get_user(userdata, (unsigned int *)arg);
......
}}
}
The two O'Reilly books, Linux Device Drivers and Understanding the Linux Kernel are also good
references for how to use the get_user and copy_from_user macros.
Hope this helps.
Cheers,
T.mike
-----Original Message-----
From: [email protected]
[mailto:[email protected]]On Behalf Of V MURAHARI
Sent: Wednesday, August 10, 2005 7:53 PM
To: [email protected]
Subject: copy_from_user problem
Hello,
I am working on a character driver for reading and writing the registers
to FPGA in our system.
I am using driver ioctl to read/write to these registers of FPGA. As the
function call to the ioctl is being made, the printk trace shows that the call goes to switch->copy_from_user. As soon as the call is made to copy_from_user, the kernel crashes
Can someone help me with this problem?
****************************************************************************
***********************
Unhandled kernel unaligned access inunaligned.c::emulate_load_store_insn, line 483
:
$0 : 00000000 10001f00 8fbf0034 02a01021 801157a0 8fe8e000 10001f00ffff00ff
$8 : 8fe8ffe0 00001f00 00000000 00000003 74652053 8fe9fed8 0000000a
50434942
$16: 10001f01 00000001 801157a0 0000000f 8fe8fee8 00000104 000000000000000f
$24: 00000000 2ac0fdb0 8fe8e000 8fe8fe38 000000018012010c
Hi : 00000000
Lo : 00000000
epc : 8011f774 Tainted: GF
Status: 10001f02
Cause : 00800014
Process rsgbm (pid: 317, stackpage=8fe8e000)
Stack: 802d920a 0000000a 10001f01 0000003c 10001f01 0000003c 8012010c
80120104 caa8f356 8fe82008 8fe82000 0000000f 00000000 7fff7d00 7fff7d00
0000c001 00000003 10012808 ffffffff caa8e548 00004000 8fe9e272 00000150
7fff7d00 ffffffea 00000000 00000240 8fe82000 00000000 00000001 00000001
7ebff310 00000000 0000000f 8fef24e0 00000004 7ebff3e8 00000000 0000002e
80159c6c ...
Call Trace: [<8012010c>] [<80120104>] [<caa8f356>] [<caa8e548>]
[<80159c6c>]
[<8010a5c4>] [<80271dc4>]
Code: 8c820004 24110001 ac430000 <ac620004> ac800000 ac800004 ac800000
ac800004
8f820004
Unit Fault Handler !!! (INDEX=10)
****************************************************************************
**********************
int
chr1_ioctl(struct inode *ino, struct file *filp, unsigned int cmd,
unsigned long arg)
{ int ret = 0;
n2_debug_rw_reg *dw;
switch(cmd)
{
case IOCTL_WIN_DEBUG_READ_CODE:
{
n2_debug_rw_reg test;
printk("%s %d\n", current->comm, current->pid);
printk("%lx\n", arg);
copy_from_user(&test, (n2_debug_rw_reg*)arg,sizeof(n2_debug_rw_reg));
printk("%lx %lx\n", ((n2_debug_rw_reg*)arg)->data,((n2_debug_rw_reg*)arg)->
addr);
}
} }
Thanks & Regards,
--Murahari