: no sound at all
The following issue has been ASSIGNED.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=997>
======================================================================
Reported By: HawkHunter
Assigned To:
======================================================================
Project: ALSA - driver Issue ID: 997 Category: PCI - cmipci Reproducibility: always Severity: major Priority: normal Status: assigned Distribution: Linux S0106002078b04ca8 2.6.9-5.0.3.ELsmp
https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1 SMP Sat Feb 19 19:38:02 CST 2005 i686 i686 i386 GNU/Linux
Kernel Version: kernel-2.6.9-5.0.3.EL
======================================================================
Date Submitted: 03-17-2005 05:17 CET Last Modified: 06-06-2005 10:25 CEST
======================================================================
Summary: no sound at all
Description:
I cant get any sound - someone suggested that this would help you:
[root@S0106002078b04ca8 ~]# lspci -vv
00:01.0 VGA compatible controller: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE] (prog-if 00 [VGA])
Subsystem: ATI Technologies Inc Radeon 7000
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping+ SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (2000ns min), Cache Line Size 08
Interrupt: pin A routed to IRQ 3
Region 0: Memory at b8000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at 4000 [size=256]
Region 2: Memory at c6ef0000 (32-bit, non-prefetchable)[size=64K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mAPME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:02.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev
10)
Subsystem: C-Media Electronics Inc CMI8738/C3DX PCI Audio Device
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (500ns min, 6000ns max)
Interrupt: pin A routed to IRQ 4
Region 0: I/O ports at 4400 [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mAPME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:03.0 Ethernet controller: Macronix, Inc. [MXIC] MX987x5 (rev 20)
Subsystem: Unknown device 2078:0540
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping+ SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (2000ns min, 14000ns max), Cache Line Size 08
Interrupt: pin A routed to IRQ 15
Region 0: I/O ports at 4800 [size=256]
Region 1: Memory at c6ee0000 (32-bit, non-prefetchable)[size=256]
Capabilities: [44] Power Management version 1
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mAPME(D0-,D1+,D2-,D3hot-,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0c.0 System peripheral: Compaq Computer Corporation System Management Controller (rev 01)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Region 0: I/O ports at 4c00 [size=256]
Region 1: Memory at c6ed0000 (32-bit, non-prefetchable)[size=256]
00:0e.0 VGA compatible controller: Cirrus Logic GD 5430/40 [Alpine] (rev
22) (prog-if 00 [VGA])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 0
Region 0: Memory at b7000000 (32-bit, prefetchable) [disabled]
[size=16M]
00:0f.0 EISA bridge: Intel Corp. 82375EB/SB PCI to EISA Bridge (rev 15)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 248
00:14.0 RAM memory: Intel Corp. 450KX/GX [Orion] - 82453KX/GX Memory controller (rev 05)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
00:19.0 Host bridge: Intel Corp. 450KX/GX [Orion] - 82454KX/GX PCI bridge (rev 06)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr+ Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR+
Latency: 32, Cache Line Size 08
00:1a.0 Host bridge: Intel Corp. 450KX/GX [Orion] - 82454KX/GX PCI bridge (rev 06)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr+ Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 32, Cache Line Size 08
01:08.0 Class ff00: Compaq Computer Corporation PCI Hotplug Controller (rev 02)
Subsystem: Compaq Computer Corporation: Unknown device a2f7
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 10
Region 0: Memory at c6ff0000 (32-bit, non-prefetchable)
[size=256]
01:0a.0 SCSI storage controller: LSI Logic / Symbios Logic 53c875 (rev
03)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr+ Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 255 (4250ns min, 16000ns max), Cache Line Size 08
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 5000 [size=256]
Region 1: Memory at c6fe0000 (32-bit, non-prefetchable)
[size=256]
Region 2: Memory at c6fd0000 (32-bit, non-prefetchable) [size=4K]01:0b.0 SCSI storage controller: LSI Logic / Symbios Logic 53c875 (rev
03)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr+ Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 255 (4250ns min, 16000ns max), Cache Line Size 08
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 5400 [size=256]
Region 1: Memory at c6fc0000 (32-bit, non-prefetchable)
[size=256]
Region 2: Memory at c6fb0000 (32-bit, non-prefetchable) [size=4K][root@S0106002078b04ca8 ~]#
Cheers, and thanks in advance for the help
Trev
======================================================================
----------------------------------------------------------------------
perex - 06-06-05 10:25
----------------------------------------------------------------------
Could you be more specific? Do you have installed and configured the snd-cmipci driver?
Issue History
Date Modified Username Field Change
======================================================================
03-17-05 05:17 HawkHunter New Issue
03-17-05 05:17 HawkHunter Distribution => Linux
S0106002078b04ca8 2.6.9-5.0.3.ELsmp
https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1 SMP Sat Feb 19 19:38:02 CST 2005 i686 i686 i386 GNU/Linux
03-17-05 05:17 HawkHunter Kernel Version => kernel-2.6.9-5.0.3.EL 06-06-05 10:25 perex Note Added: 0004892 06-06-05 10:25 perex Assigned To perex => 06-06-05 10:25 perex Category 0_compilation problem_!!!
=> PCI - cmipci
======================================================================
-------------------------------------------------------
This SF.Net email is sponsored by: NEC IT Guy Games. How far can you shotput a projector? How fast can you ride your desk chair down the office luge track? If you want to score the big prize, get to know the little guy. Play to win an NEC 61" plasma display: http://www.necitguy.com/?r=20