Skip to contentSkip to conversation

UDP port 1194 marking/routing problem

Openvpn-users Remus 2 participants 3 messages Apr 6, 2005

lore
Share & tools
lore

Remus

author
#0 lore raw

Hi Wang,

We specialy got two Internet connections, one is only for the OpenVPN (it is heavily used) and second for everthing else.
I will give a try to PREROUTING stuff right away.

What do mean : But I don't think you need to use MARK to do policy routing. It's a little overkill.

Do you another suggestion than iptables/MARK?

Regards

Remus

----- Original Message -----
From: "Wang Jian" <[email protected]>
To: <[email protected]>
Cc: "Remus" <[email protected]>; <[email protected]>
Sent: Wednesday, April 06, 2005 12:23 PM
Subject: [Openvpn-users] Re: [LARTC] UDP port 1194 marking/routing problem

Quoted 48 lines

Hi Remus,

It seems that

iptables -t mangle -A POSTROUTING -o eth0 -p udp --dport 1194 -j MARK \
   --set-mark 0x990

will not take effect. (didn't you typo -A as -D?)

POSTROUTING is looked up after routing decision is made. Because the default route is dev eth1, the output device is eth1, -o eth0 will not match.

You should use

iptables -t mangle -A PREROUTING -p udp --destination <your openvpn \
   peer> --dport 1194 -j MARK ....

But I don't think you need to use MARK to do policy routing. It's a little overkill.

Why not simply route all traffic to your openvpn peer via device eth0?

Quoted 22 lines · Remus

Hi folks,

I have OpenVPN (respect for it developers) running on my FW. Is has two external NICs and on internal everything is fine, except I want OpenVPN (UDP port 1194) going not via default route/network interface.

I use such commands:

iptables -t mangle -D POSTROUTING -o eth0 -p udp --dport 1194 -j MARK --set-mark 0x990
ip rule add fwmark 0x990 table openvpn1
ip route add default via $P2 dev eth0 table openvpn1

eth0 is FW's not default external NIC.

I have in use very similar iptables rules for my email server (TCP ports) and etc.
Everything works fine.
What I'm doing wrong with marking/routing the UDP port?

Quoted 23 lines
Quoted 4 lines

Regards

Remus

Signature · 13 lines
 lark



-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_ide95&alloc_id396&op=click
_______________________________________________
Openvpn-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/openvpn-users

_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

#1 lore raw

Hi Remus,

I means: don't use policy routing, because you can use much simpler solution.

Example:

ip route add default via $DEFAULTGW dev eth1 ip route add xxx.xxx.xxx.xxx/32 via $ANOTHERGW dev eth0

The second, send all your traffic to IP xxx.xxx.xxx.xxx via eth0. When your box acts as your intranet's gateway, you can SNAT or MASQUERADE on eth0, like

iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE.

For you openvpn configuration, you can either bind openvpn to eth0's ip, or let system chooose the IP, in most case the output interface.

Quoted 101 lines · Remus

Hi Wang,

We specialy got two Internet connections, one is only for the OpenVPN (it is heavily used) and second for everthing else.
I will give a try to PREROUTING stuff right away.

What do mean : But I don't think you need to use MARK to do policy routing. It's a little overkill.

Do you another suggestion than iptables/MARK?

Regards

Remus

----- Original Message -----
From: "Wang Jian" <[email protected]>
To: <[email protected]>
Cc: "Remus" <[email protected]>; <[email protected]>
Sent: Wednesday, April 06, 2005 12:23 PM
Subject: [Openvpn-users] Re: [LARTC] UDP port 1194 marking/routing problem

Quoted 48 lines

Hi Remus,

It seems that

iptables -t mangle -A POSTROUTING -o eth0 -p udp --dport 1194 -j MARK \
   --set-mark 0x990

will not take effect. (didn't you typo -A as -D?)

POSTROUTING is looked up after routing decision is made. Because the default route is dev eth1, the output device is eth1, -o eth0 will not match.

You should use

iptables -t mangle -A PREROUTING -p udp --destination <your openvpn \
   peer> --dport 1194 -j MARK ....

But I don't think you need to use MARK to do policy routing. It's a little overkill.

Why not simply route all traffic to your openvpn peer via device eth0?

Quoted 22 lines · Remus

Hi folks,

I have OpenVPN (respect for it developers) running on my FW. Is has two external NICs and on internal everything is fine, except I want OpenVPN (UDP port 1194) going not via default route/network interface.

I use such commands:

iptables -t mangle -D POSTROUTING -o eth0 -p udp --dport 1194 -j MARK --set-mark 0x990
ip rule add fwmark 0x990 table openvpn1
ip route add default via $P2 dev eth0 table openvpn1

eth0 is FW's not default external NIC.

I have in use very similar iptables rules for my email server (TCP ports) and etc.
Everything works fine.
What I'm doing wrong with marking/routing the UDP port?

Quoted 23 lines
Quoted 4 lines

Regards

Remus

Signature · 13 lines
 lark



-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_ide95&alloc_id396&op=click
_______________________________________________
Openvpn-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/openvpn-users

_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

Signature · 6 lines
  lark

_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
#2 lore raw
In reply to Remus

Hi John E. Peterson,

Yes. My stupid typo.

Quoted 217 lines · John E. Peterson

Did you mean POSTROUTING to PREROUTING? That looked wierd.

----- Original Message -----
From: "Wang Jian" <[email protected]>
To: "Remus" <[email protected]>
Cc: <[email protected]>; <[email protected]>
Sent: Wednesday, April 06, 2005 10:03 AM
Subject: [Openvpn-users] Re: [LARTC] UDP port 1194 marking/routing problem

Quoted 207 lines

Hi Remus,

Quoted 8 lines · Remus

Wang,

That solution does not suite me:

Quoted 2 lines

ip route add default via $DEFAULTGW dev eth1 ip route add xxx.xxx.xxx.xxx/32 via $ANOTHERGW dev eth0

Because only UPD 1194 has to be routed via eth0 to OpenVPN server IP, everything else
to same Ip has to go via eth1.

I see. So you need policy routing. Change your netfilter rule from POSTROUTING to POSTROUTING.

Quoted 171 lines

----- Original Message -----
From: "Wang Jian" <[email protected]>
To: "Remus" <[email protected]>
Cc: <[email protected]>; <[email protected]>
Sent: Wednesday, April 06, 2005 1:38 PM
Subject: Re: [Openvpn-users] Re: [LARTC] UDP port 1194 marking/routing problem

Quoted 159 lines

Hi Remus,

I means: don't use policy routing, because you can use much simpler solution.

Example:

ip route add default via $DEFAULTGW dev eth1 ip route add xxx.xxx.xxx.xxx/32 via $ANOTHERGW dev eth0

The second, send all your traffic to IP xxx.xxx.xxx.xxx via eth0. When your box acts as your intranet's gateway, you can SNAT or MASQUERADE on eth0, like

iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE.

For you openvpn configuration, you can either bind openvpn to eth0's ip,
or let system chooose the IP, in most case the output interface.

Quoted 114 lines · Remus

Hi Wang,

We specialy got two Internet connections, one is only for the OpenVPN (it
is
heavily used) and second for everthing else.
I will give a try to PREROUTING stuff right away.

What do mean : But I don't think you need to use MARK to do policy routing.
It's a little overkill.

Do you another suggestion than iptables/MARK?

Regards

Remus

----- Original Message -----
From: "Wang Jian" <[email protected]>
To: <[email protected]>
Cc: "Remus" <[email protected]>; <[email protected]>
Sent: Wednesday, April 06, 2005 12:23 PM
Subject: [Openvpn-users] Re: [LARTC] UDP port 1194 marking/routing problem

Quoted 54 lines

Hi Remus,

It seems that

iptables -t mangle -A POSTROUTING -o eth0 -p udp --dport 1194 -j

MARK \
   --set-mark 0x990

will not take effect. (didn't you typo -A as -D?)

POSTROUTING is looked up after routing decision is made. Because the default route is dev eth1, the output device is eth1, -o eth0 will not
match.

You should use

iptables -t mangle -A PREROUTING -p udp --destination <your openvpn

\
   peer> --dport 1194 -j MARK ....

But I don't think you need to use MARK to do policy routing. It's a little overkill.

Why not simply route all traffic to your openvpn peer via device eth0?

Quoted 23 lines · Remus

Hi folks,

I have OpenVPN (respect for it developers) running on my FW. Is has two external NICs and on internal everything is fine, except I want OpenVPN (UDP port 1194) going not via default route/network interface.

I use such commands:

iptables -t mangle -D POSTROUTING -o eth0 -p udp --dport 1194 -j MARK --set-mark 0x990
ip rule add fwmark 0x990 table openvpn1
ip route add default via $P2 dev eth0 table openvpn1

eth0 is FW's not default external NIC.

I have in use very similar iptables rules for my email server (TCP ports)
and etc.
Everything works fine.
What I'm doing wrong with marking/routing the UDP port?

Quoted 25 lines
Quoted 4 lines

Regards

Remus

Signature · 15 lines
 lark



-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real
users.
Discover which products truly live up to the hype. Start reading 
now.
http://ads.osdn.com/?ad_ide95&alloc_id396&op=click
_______________________________________________
Openvpn-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/openvpn-users

_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

Signature · 14 lines
 lark



-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real 
users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_ide95&alloc_id396&op=click
_______________________________________________
Openvpn-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/openvpn-users
Signature · 13 lines
 lark



-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_ide95&alloc_id396&op=click
_______________________________________________
Openvpn-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/openvpn-users
Signature · 6 lines
  lark

_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc